ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MMBTH34
詳細を表示 DataSheets

MMBTH34 Transistor

Introduction

The MMBTH34 is a bipolar junction transistor (BJT) that belongs to the category of small signal transistors. It is commonly used in electronic circuits for amplification and switching applications due to its high frequency and low power characteristics.

Basic Information Overview

  • Category: Small Signal Transistor
  • Use: Amplification and Switching
  • Characteristics: High Frequency, Low Power
  • Package: SOT-23
  • Essence: NPN Bipolar Junction Transistor
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Maximum Collector-Base Voltage (Vcb): 40V
  • Maximum Collector-Emitter Voltage (Vce): 40V
  • Maximum Emitter-Base Voltage (Veb): 5V
  • Continuous Collector Current (Ic): 200mA
  • Total Power Dissipation (Pd): 225mW
  • Transition Frequency (ft): 300MHz

Detailed Pin Configuration

The MMBTH34 transistor has three pins: 1. Collector (C): Connected to the positive supply voltage in most applications. 2. Base (B): Controls the transistor's conductivity when a small current is applied. 3. Emitter (E): Connected to the ground or negative supply voltage.

Functional Features

  • High frequency capability makes it suitable for RF applications.
  • Low power consumption ideal for battery-operated devices.
  • Fast switching speed for digital applications.

Advantages and Disadvantages

Advantages

  • High frequency performance
  • Low power dissipation
  • Small package size

Disadvantages

  • Limited maximum collector current
  • Moderate voltage ratings

Working Principles

The MMBTH34 operates based on the principles of bipolar junction transistors. When a small current is applied to the base, it controls the larger current flow between the collector and emitter, allowing for amplification or switching of signals.

Detailed Application Field Plans

The MMBTH34 transistor finds extensive use in the following applications: - Radio Frequency (RF) amplifiers - Oscillators - Signal amplification in audio circuits - Switching circuits in electronic devices

Detailed and Complete Alternative Models

  • MMBTH10: Similar characteristics with higher voltage ratings
  • MMBTH44: Higher current handling capability with slightly lower frequency performance
  • MMBTH64: Enhanced high-frequency performance with similar power dissipation

In conclusion, the MMBTH34 transistor is a versatile component widely used in electronic circuits for its high frequency, low power characteristics, making it suitable for various amplification and switching applications.

Word Count: 398

技術ソリューションにおける MMBTH34 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is MMBTH34?

    • MMBTH34 is a high-frequency, low-noise NPN transistor commonly used in RF and microwave applications.

  2. What are the typical applications of MMBTH34?

    • MMBTH34 is often used in RF amplifiers, oscillators, mixers, and other high-frequency circuits.

  3. What are the key electrical characteristics of MMBTH34?

    • The MMBTH34 transistor typically has a maximum collector current of 100mA, a maximum power dissipation of 225mW, and a transition frequency (ft) of around 4GHz.

  4. How does MMBTH34 compare to other transistors in its class?

    • MMBTH34 offers low noise figure, high gain, and good linearity, making it suitable for demanding RF applications.

  5. What are the recommended operating conditions for MMBTH34?

    • The recommended operating voltage for MMBTH34 is typically between 3V and 15V, with a maximum collector-base voltage of 30V.

  6. Can MMBTH34 be used in high-temperature environments?

    • MMBTH34 has a maximum junction temperature of 150°C, making it suitable for many industrial and automotive applications.

  7. What are some common circuit configurations using MMBTH34?

    • Common configurations include common emitter, common base, and cascode configurations, depending on the specific application requirements.

  8. Are there any known reliability issues with MMBTH34?

    • MMBTH34 is known for its reliability and ruggedness, making it a popular choice for critical applications.

  9. What are the packaging options available for MMBTH34?

    • MMBTH34 is commonly available in SOT-23 surface mount packages, which offer compact size and ease of assembly.

  10. Where can I find detailed application notes for using MMBTH34 in technical solutions?

    • Detailed application notes and design guidelines for MMBTH34 can be found in the manufacturer's datasheet and application guides, providing valuable insights into maximizing its performance in various technical solutions.