ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MC74HC597ADTG
詳細を表示 DataSheets

MC74HC597ADTG

Product Overview

Category

MC74HC597ADTG belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in digital systems for data storage and transfer.

Characteristics

  • High-speed operation
  • Wide operating voltage range
  • Low power consumption
  • Schmitt-trigger inputs for noise immunity
  • Output current capability: 6 mA at VCC = 4.5 V

Package

MC74HC597ADTG is available in a TSSOP-16 package.

Essence

The essence of MC74HC597ADTG lies in its ability to efficiently store and transfer digital data within a system.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specific quantity of MC74HC597ADTG ICs.

Specifications

  • Supply Voltage Range: 2 V to 6 V
  • Input Voltage Range: 0 V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 25 MHz
  • Number of Storage Registers: 8
  • Serial Data Input: Shift Register
  • Serial Data Output: Parallel Register

Detailed Pin Configuration

  1. SER (Serial Data Input)
  2. SRCLK (Shift Register Clock Input)
  3. RCLK (Parallel Register Clock Input)
  4. OE (Output Enable Input)
  5. SRCLR (Shift Register Clear Input)
  6. QA-QH (Parallel Outputs)
  7. GND (Ground)
  8. QH' (Serial Output)
  9. VCC (Supply Voltage)

Functional Features

  • Serial-to-parallel data conversion
  • Parallel data storage
  • Shift register clock synchronization
  • Output enable control
  • Shift register clearing functionality

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data transfer
  • Wide operating voltage range provides flexibility in various systems
  • Low power consumption contributes to energy efficiency
  • Schmitt-trigger inputs enhance noise immunity

Disadvantages

  • Limited output current capability may restrict certain applications
  • TSSOP-16 package may require careful handling during assembly

Working Principles

MC74HC597ADTG operates based on the principle of serial-to-parallel data conversion. It receives serial data through the SER pin and uses the SRCLK input to shift the data into its internal shift register. The RCLK input is used to latch the parallel data into the output registers. The output enable (OE) pin controls the activation of the parallel outputs.

Detailed Application Field Plans

MC74HC597ADTG finds application in various digital systems, including but not limited to: - Data storage systems - Communication devices - Microcontrollers - Industrial automation equipment

Detailed and Complete Alternative Models

  1. SN74HC597: Similar functionality with different package options (DIP-16, SOIC-16)
  2. CD74HC597: Comparable features in a different package (PDIP-16)

These alternative models provide similar functionality to MC74HC597ADTG and can be considered as substitutes depending on specific requirements.

Word count: 410 words

技術ソリューションにおける MC74HC597ADTG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MC74HC597ADTG in technical solutions:

  1. Q: What is MC74HC597ADTG? A: MC74HC597ADTG is a high-speed, 8-bit shift register with input/output registers and a serial input/output bus.

  2. Q: What is the purpose of MC74HC597ADTG? A: MC74HC597ADTG is commonly used for data storage, parallel-to-serial or serial-to-parallel conversion, and general-purpose shifting applications.

  3. Q: What is the maximum clock frequency supported by MC74HC597ADTG? A: MC74HC597ADTG can operate at a maximum clock frequency of 74 MHz.

  4. Q: How many input/output pins does MC74HC597ADTG have? A: MC74HC597ADTG has a total of 16 input/output pins.

  5. Q: Can MC74HC597ADTG be cascaded to increase the number of bits? A: Yes, MC74HC597ADTG can be cascaded to increase the number of bits by connecting the serial output of one chip to the serial input of another.

  6. Q: What is the power supply voltage range for MC74HC597ADTG? A: The power supply voltage range for MC74HC597ADTG is typically between 2V and 6V.

  7. Q: Does MC74HC597ADTG support tri-state outputs? A: Yes, MC74HC597ADTG supports tri-state outputs, allowing multiple devices to share a common bus.

  8. Q: Is MC74HC597ADTG compatible with TTL logic levels? A: Yes, MC74HC597ADTG is compatible with both CMOS and TTL logic levels.

  9. Q: Can MC74HC597ADTG be used in both synchronous and asynchronous modes? A: Yes, MC74HC597ADTG can be used in both synchronous and asynchronous modes of operation.

  10. Q: What is the package type for MC74HC597ADTG? A: MC74HC597ADTG is available in a TSSOP (Thin Shrink Small Outline Package) package type.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.