ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MC100EL32DT
詳細を表示 DataSheets

MC100EL32DT

Product Overview

Category

MC100EL32DT belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for signal transmission and reception.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Differential input and output capability

Package

MC100EL32DT is available in a small outline package (SOP) with a specified pin configuration.

Essence

The essence of MC100EL32DT lies in its ability to process high-frequency signals accurately and efficiently.

Packaging/Quantity

This IC is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Input Voltage Range: -2.0V to VCC + 2.0V
  • Output Voltage Range: -2.0V to VCC + 2.0V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 1.5 ns (typical)
  • Maximum Clock Frequency: 2.5 GHz

Detailed Pin Configuration

MC100EL32DT has a total of 8 pins, which are labeled as follows:

  1. VCC - Power supply voltage
  2. GND - Ground reference
  3. IN+ - Non-inverting differential input
  4. IN- - Inverting differential input
  5. Q - Differential output
  6. /Q - Complementary differential output
  7. VBB - Bias voltage for internal circuitry
  8. NC - No connection (unused pin)

Functional Features

  • Differential input and output capability allows for noise rejection and improved signal integrity.
  • High-speed operation enables efficient data transmission and reception.
  • Wide operating voltage range provides flexibility in various electronic systems.
  • Low power consumption contributes to energy efficiency.

Advantages and Disadvantages

Advantages

  • High-speed operation enables fast data processing.
  • Differential input and output capability improves noise immunity.
  • Wide operating voltage range allows for compatibility with different systems.
  • Low power consumption contributes to energy efficiency.

Disadvantages

  • Limited availability of alternative models may restrict design flexibility.
  • Higher cost compared to some other ICs with similar functionalities.

Working Principles

MC100EL32DT operates based on differential signaling principles. The differential inputs receive two complementary signals, which are processed internally to generate the differential output. This differential signaling technique enhances noise rejection and signal integrity, making it suitable for high-frequency applications.

Detailed Application Field Plans

MC100EL32DT finds application in various fields, including:

  1. Telecommunications: Used in high-speed data transmission systems, such as fiber optic networks and wireless communication devices.
  2. Computer Networking: Employed in routers, switches, and network interface cards to ensure reliable and efficient data transfer.
  3. Test and Measurement Equipment: Integrated into oscilloscopes, logic analyzers, and signal generators for accurate signal analysis and generation.
  4. Industrial Automation: Utilized in control systems and PLCs (Programmable Logic Controllers) for precise signal processing and communication.

Detailed and Complete Alternative Models

  1. MC100EL32D: Similar functionality, but without the temperature range specified.
  2. MC100EL32DG: Available in a different package (SOIC), suitable for certain applications.
  3. MC100EL32DR2G: RoHS-compliant version of MC100EL32DT, ensuring environmental compliance.

(Note: The above list is not exhaustive and may vary depending on the manufacturer and specific requirements.)

Word count: 527 words

技術ソリューションにおける MC100EL32DT の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MC100EL32DT in technical solutions:

  1. Q: What is MC100EL32DT? A: MC100EL32DT is a differential ECL (Emitter-Coupled Logic) receiver IC (Integrated Circuit) used for high-speed data transmission.

  2. Q: What is the operating voltage range of MC100EL32DT? A: The operating voltage range of MC100EL32DT is typically between -4.2V and -5.7V.

  3. Q: What is the maximum data rate supported by MC100EL32DT? A: MC100EL32DT can support data rates up to 3.8 Gbps (Gigabits per second).

  4. Q: Can MC100EL32DT be used in both single-ended and differential applications? A: No, MC100EL32DT is specifically designed for differential applications only.

  5. Q: What is the input common-mode voltage range of MC100EL32DT? A: The input common-mode voltage range of MC100EL32DT is typically between -2.0V and -4.2V.

  6. Q: Does MC100EL32DT require external termination resistors? A: Yes, MC100EL32DT requires external termination resistors to match the characteristic impedance of the transmission line.

  7. Q: Can MC100EL32DT be used in low-power applications? A: No, MC100EL32DT is not suitable for low-power applications as it consumes relatively higher power compared to other logic families.

  8. Q: What is the output swing of MC100EL32DT? A: The output swing of MC100EL32DT is typically around 800mV (millivolts) to 1V (volt).

  9. Q: Is MC100EL32DT compatible with other logic families? A: MC100EL32DT is not directly compatible with other logic families like TTL or CMOS. Level shifting may be required for interfacing.

  10. Q: What are some typical applications of MC100EL32DT? A: MC100EL32DT is commonly used in high-speed data communication systems, clock distribution networks, and digital signal processing applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.