ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MC100EL12DTG
詳細を表示 DataSheets

MC100EL12DTG

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Converter
  • Characteristics: High-speed, Low-power
  • Package: 8-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: Converts ECL (Emitter-Coupled Logic) signals to TTL (Transistor-Transistor Logic) levels
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: -4.2V to -5.7V
  • Input Voltage Range: -3.0V to -5.7V
  • Output Voltage Range: 0V to 5.0V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 1.6 ns (typical)
  • Output Skew: 50 ps (typical)

Detailed Pin Configuration

The MC100EL12DTG has the following pin configuration:

  1. VCC - Power Supply
  2. GND - Ground
  3. Q - Output
  4. /Q - Complementary Output
  5. D - Differential Input
  6. /D - Complementary Differential Input
  7. VBB - Bias Voltage
  8. VEE - Negative Power Supply

Functional Features

  • Converts ECL signals to TTL levels
  • High-speed operation with low propagation delay
  • Compatible with various logic families
  • Differential input and complementary outputs for noise immunity
  • Wide operating temperature range

Advantages and Disadvantages

Advantages: - High-speed signal conversion - Low power consumption - Wide operating temperature range - Noise immunity due to differential inputs and complementary outputs

Disadvantages: - Requires negative power supply - Limited voltage range for input and output signals

Working Principles

The MC100EL12DTG is designed to convert ECL signals, which operate at negative voltage levels, to TTL logic levels that use positive voltage levels. It achieves this conversion by utilizing differential inputs and complementary outputs. The device operates with low propagation delay, allowing for high-speed signal conversion.

Detailed Application Field Plans

The MC100EL12DTG is commonly used in applications where ECL signals need to be converted to TTL levels. Some of the typical application fields include:

  1. Telecommunications: Signal conversion between different logic families in communication systems.
  2. Data Communication: Interface conversion between ECL-based data transmission systems and TTL-based devices.
  3. Test and Measurement: Signal conditioning and level shifting in test equipment.
  4. Industrial Control Systems: Conversion of ECL signals from sensors or control units to TTL levels for processing.

Detailed and Complete Alternative Models

  • MC100EL11DTG
  • MC100EL13DTG
  • MC100EL14DTG
  • MC100EL15DTG
  • MC100EL16DTG

These alternative models are part of the same series and offer similar functionality with slight variations in specifications and pin configurations.

Word count: 350 words

技術ソリューションにおける MC100EL12DTG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MC100EL12DTG in technical solutions:

  1. Q: What is MC100EL12DTG? A: MC100EL12DTG is a high-speed differential receiver designed for use in various electronic applications.

  2. Q: What is the operating voltage range of MC100EL12DTG? A: The operating voltage range of MC100EL12DTG is typically between -4.2V and -5.7V.

  3. Q: What is the maximum data rate supported by MC100EL12DTG? A: MC100EL12DTG can support data rates up to 3.8 Gbps.

  4. Q: Can MC100EL12DTG be used in both single-ended and differential signaling applications? A: No, MC100EL12DTG is specifically designed for differential signaling applications.

  5. Q: What is the input sensitivity of MC100EL12DTG? A: The input sensitivity of MC100EL12DTG is typically around 50 mV.

  6. Q: Does MC100EL12DTG have built-in termination resistors? A: No, MC100EL12DTG does not have built-in termination resistors. External termination resistors may be required depending on the application.

  7. Q: Can MC100EL12DTG be used in high-speed communication systems? A: Yes, MC100EL12DTG is suitable for high-speed communication systems such as data centers, telecommunications, and networking equipment.

  8. Q: What is the output swing of MC100EL12DTG? A: The output swing of MC100EL12DTG is typically around 800 mV.

  9. Q: Is MC100EL12DTG compatible with other ECL logic families? A: Yes, MC100EL12DTG is compatible with other ECL logic families such as the 10KH, 100K, and 10K families.

  10. Q: What are some typical applications of MC100EL12DTG? A: Some typical applications of MC100EL12DTG include clock and data recovery circuits, high-speed data transmission systems, and digital communication interfaces.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.