ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MC100EL12DG
詳細を表示 DataSheets

MC100EL12DG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Level Translator
  • Characteristics: High-speed, low-voltage, differential input/output
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Translates signals between different voltage levels
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: -4.2V to -5.7V
  • Input Voltage Range: -3.0V to -5.5V
  • Output Voltage Range: -3.0V to -5.5V
  • Propagation Delay: 1.6 ns
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC100EL12DG has the following pin configuration:

  1. VCC - Power supply voltage
  2. GND - Ground reference
  3. IN+ - Non-inverting differential input
  4. IN- - Inverting differential input
  5. VBB - Bias voltage for output stage
  6. Q - Output
  7. Q - Complementary output
  8. VEE - Negative power supply voltage

Functional Features

  • High-speed signal translation between different voltage levels
  • Differential input and output for improved noise immunity
  • Wide operating temperature range for versatile applications
  • Low propagation delay for minimal signal distortion
  • Compatible with ECL (Emitter-Coupled Logic) logic families

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient signal translation - Differential input/output reduces susceptibility to noise - Wide operating temperature range allows usage in various environments

Disadvantages: - Requires negative power supply voltage - Limited input/output voltage range

Working Principles

The MC100EL12DG is a signal level translator that converts signals between different voltage levels. It operates based on the principles of ECL logic, which uses differential signaling to achieve high-speed and noise-immune data transmission. The device takes in differential input signals and translates them to the desired output voltage levels.

Detailed Application Field Plans

The MC100EL12DG can be used in various applications, including:

  1. Telecommunications: Signal translation between different communication protocols
  2. Data Centers: Level shifting for interconnecting devices operating at different voltage levels
  3. Industrial Automation: Interface conversion between control systems and sensors/actuators
  4. Test and Measurement Equipment: Signal conditioning and translation for accurate measurements

Detailed and Complete Alternative Models

  • MC100EL11DG: Single-ended to differential signal level translator
  • MC100EL13DG: Differential to single-ended signal level translator
  • MC100EL14DG: Differential to differential signal level translator with enable/disable functionality
  • MC100EL15DG: Differential to differential signal level translator with differential outputs

These alternative models provide similar functionality but may have different pin configurations or additional features.

Word count: 275 words

技術ソリューションにおける MC100EL12DG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MC100EL12DG in technical solutions:

  1. Q: What is MC100EL12DG? A: MC100EL12DG is a differential receiver IC (integrated circuit) commonly used in high-speed digital communication systems.

  2. Q: What is the operating voltage range for MC100EL12DG? A: The operating voltage range for MC100EL12DG is typically between -4.2V and -5.7V.

  3. Q: What is the maximum data rate supported by MC100EL12DG? A: MC100EL12DG can support data rates up to 3.8 Gbps (gigabits per second).

  4. Q: Can MC100EL12DG be used in both single-ended and differential applications? A: No, MC100EL12DG is specifically designed for differential applications only.

  5. Q: What is the input voltage swing requirement for MC100EL12DG? A: The input voltage swing requirement for MC100EL12DG is typically ±200mV.

  6. Q: Does MC100EL12DG have built-in termination resistors? A: No, MC100EL12DG does not have built-in termination resistors. External termination resistors may be required depending on the application.

  7. Q: Can MC100EL12DG be used in both AC-coupled and DC-coupled applications? A: Yes, MC100EL12DG can be used in both AC-coupled and DC-coupled applications.

  8. Q: What is the output voltage swing of MC100EL12DG? A: The output voltage swing of MC100EL12DG is typically ±800mV.

  9. Q: Is MC100EL12DG compatible with other ECL (Emitter-Coupled Logic) devices? A: Yes, MC100EL12DG is compatible with other ECL devices and can be used in conjunction with them.

  10. Q: What are some typical applications of MC100EL12DG? A: Some typical applications of MC100EL12DG include high-speed data communication systems, clock distribution networks, and digital signal processing systems.

Please note that the answers provided here are general and may vary depending on specific design considerations and requirements.