ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MBRB30H80CT-1G
詳細を表示 DataSheets

MBRB30H80CT-1G

Introduction

The MBRB30H80CT-1G is a high-performance Schottky barrier rectifier designed for various electronic applications. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Product Overview

Category

The MBRB30H80CT-1G belongs to the category of semiconductor devices, specifically as a Schottky barrier rectifier.

Use

It is commonly used in power supply units, voltage converters, and other electronic circuits where efficient rectification of alternating current (AC) to direct current (DC) is required.

Characteristics

  • High current capability
  • Low forward voltage drop
  • Fast switching speed
  • High reliability

Package

The MBRB30H80CT-1G is typically available in a TO-263AB (D2PAK) package.

Essence

The essence of this product lies in its ability to efficiently convert AC to DC with minimal power loss and high reliability.

Packaging/Quantity

It is usually supplied in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Average Forward Current: 30A
  • Reverse Voltage: 80V
  • Forward Voltage Drop: 0.55V at 15A
  • Operating Temperature Range: -65°C to +175°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBRB30H80CT-1G typically has three pins: 1. Anode 2. Cathode 3. Gate (for some packages)

Functional Features

  • Low power loss
  • High efficiency
  • Fast recovery time
  • Excellent thermal performance

Advantages and Disadvantages

Advantages

  • High current capability
  • Low forward voltage drop
  • Fast switching speed
  • Enhanced thermal management

Disadvantages

  • Higher cost compared to standard rectifiers
  • Sensitive to reverse voltage spikes

Working Principles

The MBRB30H80CT-1G operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The MBRB30H80CT-1G is well-suited for the following applications: - Switching power supplies - DC-DC converters - Motor drives - Solar inverters - Uninterruptible power supplies (UPS) - Battery chargers

Detailed and Complete Alternative Models

Some alternative models to the MBRB30H80CT-1G include: - MBRB1545CT-1G - MBRB2045CT-1G - MBRB3045CT-1G - MBRB4045CT-1G

In summary, the MBRB30H80CT-1G is a high-performance Schottky barrier rectifier with excellent characteristics and functional features, making it suitable for a wide range of electronic applications.

[Word count: 470]

技術ソリューションにおける MBRB30H80CT-1G の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MBRB30H80CT-1G?

    • The MBRB30H80CT-1G is a Schottky barrier rectifier diode designed for high efficiency and low power loss in applications such as switch mode power supplies and freewheeling diodes.

  2. What is the maximum forward voltage of the MBRB30H80CT-1G?

    • The maximum forward voltage of the MBRB30H80CT-1G is typically around 0.55V at a forward current of 15A.

  3. What is the reverse voltage rating of the MBRB30H80CT-1G?

    • The MBRB30H80CT-1G has a reverse voltage rating of 80V, making it suitable for various low voltage applications.

  4. What are the typical applications of the MBRB30H80CT-1G?

    • Typical applications include DC/DC converters, output rectification, freewheeling diodes, and reverse battery protection.

  5. What is the maximum forward current of the MBRB30H80CT-1G?

    • The maximum forward current of the MBRB30H80CT-1G is 30A, allowing it to handle high current loads efficiently.

  6. What is the operating temperature range of the MBRB30H80CT-1G?

    • The MBRB30H80CT-1G has an operating temperature range of -65°C to +175°C, enabling its use in a wide range of environments.

  7. Does the MBRB30H80CT-1G require a heatsink?

    • Depending on the application and the level of current passing through the diode, a heatsink may be required to ensure optimal thermal performance.

  8. Is the MBRB30H80CT-1G suitable for automotive applications?

    • Yes, the MBRB30H80CT-1G is suitable for automotive applications due to its high efficiency and robust design.

  9. Can the MBRB30H80CT-1G be used in parallel to increase current handling capacity?

    • Yes, the MBRB30H80CT-1G can be used in parallel to increase the overall current handling capacity in high-power applications.

  10. What are the key advantages of using the MBRB30H80CT-1G in technical solutions?

    • The key advantages include low forward voltage drop, high current capability, fast switching speed, and excellent thermal performance, making it ideal for demanding technical solutions.