ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
FDMF3172

FDMF3172

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High efficiency - Compact size - Low power consumption - Wide input voltage range

Package: QFN (Quad Flat No-leads)

Essence: FDMF3172 is a highly efficient power management IC used in various applications.

Packaging/Quantity: The FDMF3172 is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.6V to 5.5V
  • Maximum Output Current: 20A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The FDMF3172 has the following pin configuration:

  1. VIN: Input voltage
  2. VCC: Supply voltage for internal circuitry
  3. GND: Ground
  4. BOOT: Bootstrap capacitor connection
  5. PHASE: Phase node connection
  6. SW: Switching node connection
  7. FB: Feedback voltage input
  8. EN: Enable control input
  9. PGND: Power ground
  10. VDRV: Gate driver supply voltage
  11. LGATE: Low-side gate driver output
  12. HGATE: High-side gate driver output
  13. VOUT: Output voltage
  14. SS/TRK: Soft-start/tracking control
  15. OCSET: Overcurrent protection threshold setting
  16. RT: External resistor for switching frequency adjustment

Functional Features

  • Integrated high-side and low-side MOSFETs
  • Adaptive dead-time control
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start and tracking control
  • Adjustable switching frequency

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size saves board space - Wide input voltage range allows for versatile applications - Integrated MOSFETs simplify design and reduce component count

Disadvantages: - Limited maximum output current (20A) - Requires careful thermal management at high loads

Working Principles

The FDMF3172 is a synchronous buck converter that converts the input voltage to a regulated output voltage. It utilizes pulse-width modulation (PWM) to control the duty cycle of the switching transistors, achieving efficient power conversion. The integrated MOSFETs minimize power losses and improve overall efficiency.

Detailed Application Field Plans

The FDMF3172 is commonly used in the following applications:

  1. Power supplies for computer peripherals
  2. Networking equipment
  3. Industrial automation systems
  4. Telecommunications devices
  5. LED lighting systems

Detailed and Complete Alternative Models

  1. FDMF3170: Similar specifications and features, but with a lower maximum output current of 15A.
  2. FDMF3174: Higher maximum output current of 25A, suitable for more demanding applications.
  3. FDMF3176: Enhanced thermal management capabilities for improved performance under high loads.

These alternative models provide options based on specific application requirements and desired performance characteristics.

Word Count: 314 words

技術ソリューションにおける FDMF3172 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of FDMF3172 in technical solutions:

  1. Q: What is FDMF3172? A: FDMF3172 is a highly integrated power module designed for high-performance applications, combining a driver IC and power MOSFETs in a single package.

  2. Q: What are the key features of FDMF3172? A: The key features of FDMF3172 include high efficiency, low EMI emissions, integrated protection features, compact size, and ease of use.

  3. Q: What applications can benefit from FDMF3172? A: FDMF3172 is commonly used in applications such as servers, gaming consoles, desktop computers, telecom equipment, and industrial automation systems.

  4. Q: How does FDMF3172 help improve power efficiency? A: FDMF3172 incorporates advanced power management techniques, such as synchronous rectification and adaptive gate drive control, which enhance power efficiency and reduce energy losses.

  5. Q: Does FDMF3172 support overcurrent protection? A: Yes, FDMF3172 includes built-in overcurrent protection mechanisms, such as cycle-by-cycle current limit and thermal shutdown, to safeguard against excessive current and temperature conditions.

  6. Q: Can FDMF3172 operate at high switching frequencies? A: Yes, FDMF3172 is designed to operate at high switching frequencies, typically up to several hundred kilohertz, enabling efficient power conversion in various applications.

  7. Q: Is FDMF3172 compatible with different input voltage levels? A: Yes, FDMF3172 supports a wide input voltage range, typically from 4.5V to 18V, making it suitable for both low and high voltage applications.

  8. Q: Can FDMF3172 be used in multi-phase power designs? A: Yes, FDMF3172 can be easily configured in a multi-phase configuration to handle higher power requirements and improve overall system performance.

  9. Q: Does FDMF3172 require any external components for operation? A: FDMF3172 is a fully integrated solution and does not require any external components other than standard passive components like capacitors and inductors.

  10. Q: Are there any evaluation tools available for FDMF3172? A: Yes, the manufacturer provides evaluation boards and design resources to help engineers quickly prototype and evaluate FDMF3172-based solutions.

Please note that these questions and answers are general and may vary depending on specific application requirements and use cases.