ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
CAT5125TBI-50GT3
詳細を表示 DataSheets

CAT5125TBI-50GT3

Product Overview

Category

The CAT5125TBI-50GT3 belongs to the category of electronic components, specifically a digital potentiometer.

Use

This product is primarily used in electronic circuits for controlling and adjusting resistance values digitally. It can be employed in various applications where precise resistance adjustments are required.

Characteristics

  • Digital control of resistance
  • Compact size
  • High precision
  • Low power consumption
  • Wide operating voltage range

Package

The CAT5125TBI-50GT3 is available in a small surface-mount package, making it suitable for integration into compact electronic devices.

Essence

The essence of CAT5125TBI-50GT3 lies in its ability to replace traditional mechanical potentiometers with a digital alternative, providing more accurate and reliable resistance control.

Packaging/Quantity

This product is typically packaged in reels or trays, containing a specified quantity of units per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Resistance Range: 0Ω to 50kΩ
  • Resolution: 256 steps
  • Operating Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Interface: I2C (Inter-Integrated Circuit)

Detailed Pin Configuration

The CAT5125TBI-50GT3 has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground connection
  3. SDA: Serial data line for I2C communication
  4. SCL: Serial clock line for I2C communication
  5. A0: Address selection bit 0
  6. A1: Address selection bit 1
  7. W: Wiper terminal
  8. B: Terminal connected to one end of the resistor array
  9. H: Terminal connected to the other end of the resistor array

Functional Features

  • Non-volatile memory: The CAT5125TBI-50GT3 retains its resistance value even when power is disconnected.
  • Incremental/decremental adjustment: Allows for precise and step-by-step resistance changes.
  • Low power consumption: Ideal for battery-powered applications.
  • High reliability: Digital control eliminates mechanical wear and tear associated with traditional potentiometers.

Advantages and Disadvantages

Advantages

  • Precise resistance control
  • Compact size
  • Non-volatile memory
  • Wide operating voltage range
  • High reliability

Disadvantages

  • Limited resolution compared to some higher-end digital potentiometers
  • Relatively narrow temperature range

Working Principles

The CAT5125TBI-50GT3 utilizes a resistor ladder network controlled by digital signals. The resistance value is adjusted by changing the position of the wiper terminal along the resistor array. This movement is achieved through I2C communication, allowing for precise and repeatable resistance adjustments.

Detailed Application Field Plans

The CAT5125TBI-50GT3 finds application in various electronic systems, including but not limited to: 1. Audio equipment: Volume control, tone adjustment 2. Industrial automation: Calibration, feedback control 3. Test and measurement instruments: Fine-tuning resistance values 4. Consumer electronics: Display brightness control, user interface settings

Detailed and Complete Alternative Models

  1. MCP401X: Microchip Technology Inc.
  2. AD525X: Analog Devices Inc.
  3. X9CXXX: Intersil Corporation
  4. DS180X: Maxim Integrated

These alternative models offer similar functionality and can be considered as alternatives to the CAT5125TBI-50GT3 based on specific requirements and preferences.

Word count: 511 words

技術ソリューションにおける CAT5125TBI-50GT3 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of CAT5125TBI-50GT3 in technical solutions:

  1. Q: What is CAT5125TBI-50GT3? A: CAT5125TBI-50GT3 is a specific model of a digital potentiometer manufactured by a company called CAT.

  2. Q: What is the purpose of using CAT5125TBI-50GT3 in technical solutions? A: CAT5125TBI-50GT3 is commonly used as a variable resistor or voltage divider in various electronic circuits and systems.

  3. Q: What is the maximum resistance value of CAT5125TBI-50GT3? A: The maximum resistance value of CAT5125TBI-50GT3 is 50 kilohms (kΩ).

  4. Q: Can CAT5125TBI-50GT3 be controlled digitally? A: Yes, CAT5125TBI-50GT3 can be controlled digitally through an I2C interface, allowing for easy integration into microcontroller-based systems.

  5. Q: What is the power supply voltage range for CAT5125TBI-50GT3? A: CAT5125TBI-50GT3 operates within a power supply voltage range of 2.7V to 5.5V.

  6. Q: Is CAT5125TBI-50GT3 suitable for high-precision applications? A: Yes, CAT5125TBI-50GT3 offers good linearity and low temperature coefficient, making it suitable for high-precision applications.

  7. Q: Can multiple CAT5125TBI-50GT3 devices be cascaded together? A: Yes, multiple CAT5125TBI-50GT3 devices can be cascaded together to achieve higher resistance values or more complex voltage divider configurations.

  8. Q: Does CAT5125TBI-50GT3 have non-volatile memory? A: Yes, CAT5125TBI-50GT3 has non-volatile memory that allows it to retain its settings even when power is removed.

  9. Q: What is the temperature range in which CAT5125TBI-50GT3 operates reliably? A: CAT5125TBI-50GT3 operates reliably within a temperature range of -40°C to +85°C.

  10. Q: Are there any application examples where CAT5125TBI-50GT3 is commonly used? A: Yes, CAT5125TBI-50GT3 is often used in applications such as audio equipment, instrumentation, industrial control systems, and programmable voltage references.

Please note that these answers are general and may vary depending on specific requirements and use cases.