画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
CAT24C32HU4I-GT3

CAT24C32HU4I-GT3

Product Overview

Category

The CAT24C32HU4I-GT3 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The CAT24C32HU4I-GT3 retains stored data even when power is removed.
  • High capacity: It has a storage capacity of 32 kilobits (4 kilobytes).
  • Low power consumption: The chip operates at low power levels, making it suitable for battery-powered devices.
  • I2C interface: It communicates with the host device using the widely adopted I2C protocol.
  • Wide temperature range: The chip can operate reliably in temperatures ranging from -40°C to +85°C.

Package

The CAT24C32HU4I-GT3 comes in a small surface-mount package, which facilitates easy integration into circuit boards.

Essence

The essence of this chip lies in its ability to store and retrieve digital information reliably, even in the absence of power.

Packaging/Quantity

The CAT24C32HU4I-GT3 is typically packaged in reels or tubes, containing a specific quantity of chips per package. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Storage capacity: 32 kilobits (4 kilobytes)
  • Operating voltage: 1.7V to 5.5V
  • Maximum clock frequency: 400 kHz
  • Write endurance: 1 million cycles
  • Data retention: 200 years
  • Package type: SOP-8

Detailed Pin Configuration

The CAT24C32HU4I-GT3 features an SOP-8 package with the following pin configuration:

  1. A0: Address input bit 0
  2. A1: Address input bit 1
  3. A2: Address input bit 2
  4. VSS: Ground
  5. SDA: Serial data input/output
  6. SCL: Serial clock input
  7. WP: Write protect
  8. VCC: Power supply

Functional Features

  • Random access: The chip allows for random access to any memory location, enabling efficient data retrieval.
  • Byte-level read and write operations: It supports individual byte-level read and write operations, providing flexibility in data manipulation.
  • Hardware write protection: The WP pin can be used to protect the stored data from accidental modification.
  • Sequential read mode: The chip offers a sequential read mode, allowing for faster retrieval of consecutive memory locations.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data retention even during power loss.
  • High storage capacity for various applications.
  • Low power consumption extends battery life in portable devices.
  • Compatibility with the widely used I2C interface simplifies integration into existing systems.
  • Wide temperature range enables operation in harsh environments.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Slower write speeds compared to volatile memory types.
  • Relatively higher cost per kilobyte compared to some alternative memory solutions.

Working Principles

The CAT24C32HU4I-GT3 utilizes EEPROM technology, which employs floating-gate transistors to store and retrieve digital information. When data is written, an electric charge is trapped in the floating gate, altering the transistor's behavior. This charge can be retained for an extended period, allowing the stored data to persist even when power is removed. During read operations, the stored charge is sensed, and the corresponding data is retrieved.

Detailed Application Field Plans

The CAT24C32HU4I-GT3 finds applications in various fields, including:

  1. Embedded systems: It is commonly used in microcontroller-based systems for storing configuration data, calibration values, and firmware updates.
  2. Industrial automation: The chip can be employed in industrial control systems to store critical parameters, such as sensor calibration data and system settings.
  3. Automotive electronics: It finds use in automotive applications, such as storing vehicle-specific data, security keys, and firmware updates.
  4. Consumer electronics: The chip is suitable for consumer devices like smart TVs, set-top boxes, and home appliances, where non-volatile storage is required.

Detailed and Complete Alternative Models

  1. AT24C32: Manufactured by Atmel, this EEPROM chip offers similar specifications and functionality to the CAT24C32HU4I-GT3.
  2. 24AA32A: Produced by Microchip Technology, this alternative chip provides comparable features and compatibility with the I2C interface.
  3. M24C32: STMicroelectronics manufactures this EEPROM chip, which shares similar characteristics and pin configuration with the CAT24C32

技術ソリューションにおける CAT24C32HU4I-GT3 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of CAT24C32HU4I-GT3 in technical solutions:

  1. Q: What is CAT24C32HU4I-GT3? A: CAT24C32HU4I-GT3 is a 32K-bit I2C-compatible EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by ON Semiconductor.

  2. Q: What is the operating voltage range for CAT24C32HU4I-GT3? A: The operating voltage range for CAT24C32HU4I-GT3 is from 1.7V to 5.5V.

  3. Q: How much data can CAT24C32HU4I-GT3 store? A: CAT24C32HU4I-GT3 can store up to 32 kilobits (4 kilobytes) of data.

  4. Q: What is the maximum clock frequency supported by CAT24C32HU4I-GT3? A: CAT24C32HU4I-GT3 supports a maximum clock frequency of 1 MHz.

  5. Q: Can CAT24C32HU4I-GT3 be used in automotive applications? A: Yes, CAT24C32HU4I-GT3 is designed to meet the requirements of automotive applications and is AEC-Q100 qualified.

  6. Q: Does CAT24C32HU4I-GT3 have built-in write protection? A: Yes, CAT24C32HU4I-GT3 has a built-in write protection feature that allows you to protect specific memory addresses from being written.

  7. Q: What is the endurance rating of CAT24C32HU4I-GT3? A: CAT24C32HU4I-GT3 has an endurance rating of 1 million write cycles.

  8. Q: Can CAT24C32HU4I-GT3 operate at high temperatures? A: Yes, CAT24C32HU4I-GT3 can operate at temperatures ranging from -40°C to +125°C.

  9. Q: Does CAT24C32HU4I-GT3 support sequential read operation? A: Yes, CAT24C32HU4I-GT3 supports sequential read operation, allowing you to read multiple memory locations in a single operation.

  10. Q: What is the package type for CAT24C32HU4I-GT3? A: CAT24C32HU4I-GT3 is available in a 8-lead TSSOP (Thin Shrink Small Outline Package) package.

Please note that these answers are based on general information and it's always recommended to refer to the datasheet or consult the manufacturer for specific details and application requirements.