ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BC212B_J35Z
詳細を表示 DataSheets

BC212B_J35Z

Product Overview

Category

The BC212B_J35Z belongs to the category of bipolar junction transistors (BJTs).

Use

It is commonly used as an amplifier or switch in electronic circuits.

Characteristics

  • Low power consumption
  • High gain
  • Small package size

Package

The BC212B_J35Z is typically available in a TO-92 package.

Essence

This transistor is essential for amplifying and switching signals in various electronic applications.

Packaging/Quantity

It is usually sold in reels containing multiple units, with specific quantities varying by manufacturer.

Specifications

  • Collector-Base Voltage (VCBO): 50V
  • Collector-Emitter Voltage (VCEO): 30V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 100mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (fT): 250MHz

Detailed Pin Configuration

The BC212B_J35Z has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High voltage and current gain
  • Low noise
  • Wide frequency response

Advantages

  • Small form factor
  • Versatile applications
  • Reliable performance

Disadvantages

  • Limited power handling capability
  • Susceptible to temperature variations

Working Principles

The BC212B_J35Z operates based on the principles of controlling current flow through its three terminals to amplify or switch electronic signals.

Detailed Application Field Plans

  1. Audio Amplification: Used in audio amplifiers to boost low-level signals from microphones or musical instruments.
  2. Signal Switching: Employed in electronic switches to control the flow of signals in communication systems.
  3. Oscillator Circuits: Utilized in oscillator circuits to generate high-frequency signals for radio frequency applications.

Detailed and Complete Alternative Models

  1. BC337: Similar BJT with higher current and voltage ratings.
  2. 2N3904: Commonly used general-purpose NPN transistor with comparable characteristics.
  3. 2N2222: Widely used NPN transistor suitable for various electronic applications.

In conclusion, the BC212B_J35Z is a versatile bipolar junction transistor with applications in amplification, switching, and oscillation circuits. Its compact size and high gain make it suitable for a wide range of electronic designs.

[Word count: 314]

技術ソリューションにおける BC212B_J35Z の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is BC212B_J35Z?

    • BC212B_J35Z is a PNP general purpose transistor used in various electronic applications.

  2. What are the typical applications of BC212B_J35Z?

    • BC212B_J35Z is commonly used in audio amplification, switching circuits, and voltage regulation.

  3. What are the key electrical characteristics of BC212B_J35Z?

    • The key electrical characteristics include a maximum collector current of 100mA, a maximum collector-base voltage of -50V, and a maximum power dissipation of 625mW.

  4. How does BC212B_J35Z compare to other transistors in its class?

    • BC212B_J35Z offers high current gain, low noise, and good linearity, making it suitable for a wide range of applications.

  5. What are the recommended operating conditions for BC212B_J35Z?

    • The recommended operating conditions include a maximum junction temperature of 150°C, a storage temperature range of -65°C to 150°C, and a soldering temperature of 260°C for 10 seconds.

  6. Can BC212B_J35Z be used in high-frequency applications?

    • BC212B_J35Z is not specifically designed for high-frequency applications, but it can be used in low to moderate frequency circuits.

  7. Are there any specific considerations for PCB layout when using BC212B_J35Z?

    • It's important to minimize lead lengths and keep input and output traces short to reduce parasitic capacitance and inductance.

  8. What are the common failure modes of BC212B_J35Z?

    • Common failure modes include thermal runaway due to excessive power dissipation and breakdown under high voltage conditions.

  9. Can BC212B_J35Z be used in automotive applications?

    • BC212B_J35Z can be used in certain automotive applications, but it's important to ensure that it meets the necessary specifications for temperature, voltage, and reliability.

  10. Where can I find detailed technical information and datasheets for BC212B_J35Z?

    • Detailed technical information and datasheets for BC212B_J35Z can be found on the manufacturer's website or through authorized distributors.