NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XPC850SRVR50BU
詳細を表示 DataSheets

XPC850SRVR50BU

Product Overview

Category

XPC850SRVR50BU belongs to the category of microprocessors.

Use

This microprocessor is primarily used in embedded systems and industrial applications.

Characteristics

  • High-performance microprocessor
  • Low power consumption
  • Advanced architecture
  • Integrated peripherals for enhanced functionality

Package

XPC850SRVR50BU is available in a compact package, suitable for surface mount technology (SMT) assembly.

Essence

The essence of XPC850SRVR50BU lies in its ability to provide efficient processing power while consuming minimal energy.

Packaging/Quantity

This microprocessor is typically packaged in trays or reels, with quantities varying based on customer requirements.

Specifications

  • Architecture: PowerPC
  • Clock Speed: 50 MHz
  • Data Bus Width: 32 bits
  • Address Bus Width: 32 bits
  • Cache Memory: 8 KB
  • Operating Voltage: 3.3 V
  • Maximum Power Consumption: 1.5 W
  • Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of XPC850SRVR50BU is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage | | 2 | GND | Ground | | 3 | RESET | Reset input | | 4 | CLKIN | External clock input | | 5 | CLKOUT | Clock output | | 6 | ADDR[0:31] | Address bus | | 7 | DATA[0:31] | Data bus | | 8 | IRQ | Interrupt request | | 9 | ... | ... | | ... | ... | ... |

Functional Features

  • High-performance processing capabilities
  • Integrated memory management unit (MMU)
  • On-chip peripherals including UART, SPI, I2C, and timers
  • Support for various communication protocols
  • Power-saving features for efficient energy utilization

Advantages and Disadvantages

Advantages

  • Excellent performance-to-power ratio
  • Wide range of integrated peripherals
  • Suitable for embedded systems with limited power budgets
  • Robust architecture for reliable operation

Disadvantages

  • Relatively lower clock speed compared to some contemporary microprocessors
  • Limited cache memory size

Working Principles

XPC850SRVR50BU operates based on the PowerPC architecture. It executes instructions fetched from memory, performs calculations, and controls external devices through its integrated peripherals. The microprocessor communicates with other system components via the address and data buses.

Detailed Application Field Plans

XPC850SRVR50BU finds applications in various fields, including: 1. Industrial automation 2. Automotive electronics 3. Telecommunications equipment 4. Medical devices 5. Consumer electronics

In industrial automation, it can be used for controlling machinery and monitoring processes. In automotive electronics, it can be employed for engine management systems and vehicle diagnostics. In telecommunications equipment, it can facilitate data routing and network management. In medical devices, it can enable precise control and monitoring of medical equipment. In consumer electronics, it can power smart home devices and multimedia systems.

Detailed and Complete Alternative Models

Some alternative models to XPC850SRVR50BU include: 1. XPC860ENZP50B 2. MPC5554MZP132 3. AT91SAM9G45-CU 4. STM32F407VGT6 5. PIC32MX795F512L

These models offer similar functionalities and can be considered as alternatives depending on specific requirements and compatibility with the target system.

Word count: 530 words

技術ソリューションにおける XPC850SRVR50BU の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XPC850SRVR50BU in technical solutions:

  1. Q: What is XPC850SRVR50BU? A: XPC850SRVR50BU is a microprocessor from the PowerQUICC family, designed for embedded systems and networking applications.

  2. Q: What is the clock speed of XPC850SRVR50BU? A: The clock speed of XPC850SRVR50BU is 50 MHz.

  3. Q: What are the key features of XPC850SRVR50BU? A: Some key features of XPC850SRVR50BU include an integrated RISC processor, memory management unit, multiple communication interfaces, and support for various peripherals.

  4. Q: What are the typical applications of XPC850SRVR50BU? A: XPC850SRVR50BU is commonly used in networking equipment, industrial automation, telecommunications, and other embedded systems requiring reliable and efficient processing.

  5. Q: Does XPC850SRVR50BU support real-time operating systems (RTOS)? A: Yes, XPC850SRVR50BU is compatible with various RTOS, making it suitable for time-critical applications.

  6. Q: Can XPC850SRVR50BU handle Ethernet connectivity? A: Yes, XPC850SRVR50BU supports Ethernet connectivity through its built-in Ethernet controller.

  7. Q: What is the maximum memory capacity supported by XPC850SRVR50BU? A: XPC850SRVR50BU can address up to 16 MB of memory.

  8. Q: Does XPC850SRVR50BU have any power-saving features? A: Yes, XPC850SRVR50BU incorporates power-saving features like clock gating and sleep modes to optimize power consumption.

  9. Q: Is XPC850SRVR50BU a suitable choice for low-power applications? A: While XPC850SRVR50BU is not specifically designed for ultra-low power applications, it can still be used in moderate power-constrained environments.

  10. Q: Are development tools available for programming XPC850SRVR50BU? A: Yes, various development tools, compilers, and debuggers are available to program and test applications on XPC850SRVR50BU.

Please note that the answers provided here are general and may vary depending on specific implementation details and requirements.