NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MPXV2202DP
詳細を表示 DataSheets

MPXV2202DP

Introduction

The MPXV2202DP is a pressure sensor belonging to the category of integrated pressure sensors. It is commonly used for measuring absolute pressure in various applications. This entry provides an overview of the MPXV2202DP, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Integrated Pressure Sensor
  • Use: Measurement of Absolute Pressure
  • Characteristics: High Accuracy, Small Size, Low Power Consumption
  • Package: Dual Inline Package (DIP)
  • Essence: Accurate Pressure Sensing
  • Packaging/Quantity: Typically Available in Reel Packaging

Specifications

  • Pressure Range: 0 to 200 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog
  • Operating Temperature Range: -40°C to 125°C
  • Sensitivity: 45 mV/kPa
  • Response Time: <1 ms

Detailed Pin Configuration

The MPXV2202DP has a total of 6 pins: 1. Vout - Analog Output 2. Vss - Ground 3. VDD - Supply Voltage 4. N/C - No Connection 5. N/C - No Connection 6. N/C - No Connection

Functional Features

  • High Accuracy: Provides precise pressure measurements
  • Small Size: Compact design for easy integration into various systems
  • Low Power Consumption: Energy-efficient operation

Advantages and Disadvantages

Advantages

  • Accurate and reliable pressure sensing
  • Compact size for easy integration
  • Low power consumption for energy efficiency

Disadvantages

  • Limited pressure range compared to some other sensors
  • Analog output may require additional signal conditioning

Working Principles

The MPXV2202DP operates on the principle of piezoresistive sensing. When pressure is applied, the sensor's internal diaphragm deflects, causing a change in resistance. This change is then converted into an analog voltage output proportional to the applied pressure.

Detailed Application Field Plans

The MPXV2202DP is suitable for a wide range of applications, including: - Medical Devices: Blood pressure monitors, respiratory equipment - Automotive: Engine control, tire pressure monitoring - Industrial Automation: Hydraulic systems, pneumatic controls - Consumer Electronics: Smartphones, wearables

Detailed and Complete Alternative Models

Some alternative models to the MPXV2202DP include: - MPXV5010DP: Offers a wider pressure range - MPX5700AP: Higher accuracy and digital output - MPXHZ6250AC6T1: Enhanced temperature compensation

In conclusion, the MPXV2202DP is a versatile pressure sensor with high accuracy and compact design, making it suitable for various applications across different industries.

[Word Count: 410]

技術ソリューションにおける MPXV2202DP の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MPXV2202DP pressure sensor used for?

    • The MPXV2202DP is a pressure sensor commonly used to measure air and non-corrosive gas pressure in various technical applications.

  2. What is the operating voltage range of the MPXV2202DP?

    • The operating voltage range of the MPXV2202DP is typically 4.75V to 5.25V.

  3. How does the MPXV2202DP communicate with microcontrollers or other devices?

    • The MPXV2202DP communicates using an analog output, typically a voltage signal proportional to the sensed pressure.

  4. What is the pressure range that the MPXV2202DP can measure?

    • The MPXV2202DP can measure pressure within a range of 0 to 2 kPa (0 to 10 cmH2O).

  5. Is the MPXV2202DP suitable for medical device applications?

    • Yes, the MPXV2202DP is often used in medical devices such as ventilators and respiratory equipment due to its ability to measure low-pressure air and gas.

  6. Can the MPXV2202DP be used in automotive applications?

    • Yes, the MPXV2202DP is suitable for automotive applications, particularly for measuring intake manifold pressure in engine control systems.

  7. What is the accuracy of the MPXV2202DP?

    • The MPXV2202DP has a typical accuracy of around ±1.5% full-scale span over the specified temperature range.

  8. Does the MPXV2202DP require calibration?

    • It is recommended to calibrate the MPXV2202DP according to the manufacturer's guidelines to ensure accurate pressure measurements.

  9. What are the typical environmental conditions for the MPXV2202DP?

    • The MPXV2202DP is designed to operate within a temperature range of -40°C to 125°C and is suitable for non-condensing, non-corrosive environments.

  10. Can the MPXV2202DP be used in industrial automation applications?

    • Yes, the MPXV2202DP is commonly employed in industrial automation for tasks such as pressure monitoring and control within pneumatic systems.