NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MPXV2102GP
詳細を表示 DataSheets

MPXV2102GP

Introduction

The MPXV2102GP belongs to the category of pressure sensors and is commonly used in various applications to measure air and other non-corrosive gases. This sensor possesses unique characteristics, packaging, and functional features that make it suitable for a wide range of industrial and commercial uses.

Basic Information Overview

  • Category: Pressure Sensor
  • Use: Measurement of air and non-corrosive gases
  • Characteristics: High accuracy, small form factor, low power consumption
  • Package: Surface mount
  • Essence: Accurate pressure measurement
  • Packaging/Quantity: Tape and reel packaging, quantity varies based on supplier

Specifications

  • Pressure Range: 0 to 102 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog
  • Operating Temperature: -40°C to 125°C
  • Accuracy: ±1.5% Full Scale Span (typical)

Detailed Pin Configuration

The MPXV2102GP has a total of 8 pins, with each pin serving a specific function related to power supply, output, and ground connections. The detailed pin configuration is as follows: 1. Vout - Analog Output 2. Vss - Ground 3. Vdd - Supply Voltage 4. NC - No Connection 5. NC - No Connection 6. NC - No Connection 7. NC - No Connection 8. NC - No Connection

Functional Features

  • High Accuracy: Provides precise pressure measurements
  • Small Form Factor: Compact size for easy integration into various systems
  • Low Power Consumption: Energy-efficient operation

Advantages and Disadvantages

Advantages: - Accurate pressure measurement - Small and compact design - Low power consumption

Disadvantages: - Limited to non-corrosive gases - Requires careful handling due to its sensitive nature

Working Principles

The MPXV2102GP operates on the principle of piezoresistive sensing, where changes in pressure cause a corresponding change in the resistance of the sensor. This change is then converted into an analog output signal proportional to the applied pressure.

Detailed Application Field Plans

The MPXV2102GP finds extensive use in various applications such as: - HVAC systems - Industrial automation - Medical equipment - Automotive systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the MPXV2102GP include: - MPXV5010DP - MPXV7002DP - MPXV7007DP

In conclusion, the MPXV2102GP is a versatile pressure sensor with high accuracy and a compact design, making it suitable for a wide range of applications across different industries.

Word Count: 398

技術ソリューションにおける MPXV2102GP の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MPXV2102GP pressure sensor used for?

    • The MPXV2102GP pressure sensor is commonly used to measure absolute or differential pressure in various technical solutions.

  2. What is the operating voltage range of the MPXV2102GP?

    • The operating voltage range of the MPXV2102GP is typically 4.75V to 5.25V.

  3. How does the MPXV2102GP communicate with microcontrollers or other devices?

    • The MPXV2102GP typically communicates using analog voltage output, making it compatible with most microcontrollers and signal conditioning circuits.

  4. Can the MPXV2102GP be used in medical devices?

    • Yes, the MPXV2102GP can be used in medical devices for applications such as patient monitoring and ventilator systems.

  5. What is the pressure range that the MPXV2102GP can measure?

    • The MPXV2102GP can measure pressure within a range of 0 to 2 kPa.

  6. Is the MPXV2102GP suitable for automotive applications?

    • Yes, the MPXV2102GP is suitable for automotive applications such as tire pressure monitoring systems and engine control systems.

  7. Does the MPXV2102GP require calibration before use?

    • The MPXV2102GP may require initial calibration to ensure accurate pressure measurements, especially in critical applications.

  8. What are the typical output characteristics of the MPXV2102GP?

    • The MPXV2102GP provides a linear analog output proportional to the applied pressure, typically in the range of 0.2V to 4.7V.

  9. Can the MPXV2102GP withstand harsh environmental conditions?

    • The MPXV2102GP is designed to withstand certain harsh environmental conditions, but it's important to consider the specific application and environmental factors.

  10. Are there any special considerations for PCB layout when using the MPXV2102GP?

    • Proper PCB layout techniques should be followed to minimize noise and ensure accurate readings, including proper grounding and signal routing practices.