NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MMA8453QR1
詳細を表示 DataSheets

MMA8453QR1

Introduction

The MMA8453QR1 is a versatile and high-performance 3-axis accelerometer designed for various applications in the consumer electronics, automotive, and industrial sectors. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Accelerometer
  • Use: Motion sensing and orientation detection
  • Characteristics: High sensitivity, low power consumption, compact size
  • Package: QFN (Quad Flat No-Lead)
  • Essence: Accurate motion detection and measurement
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Sensitivity: ±2g, ±4g, ±8g
  • Operating Voltage: 1.95V to 3.6V
  • Current Consumption: 6μA (standby), 165μA (active at 800Hz ODR)
  • Output Data Rate (ODR): 1.56Hz to 800Hz
  • Digital Output: I2C/SPI

Detailed Pin Configuration

The MMA8453QR1 features a 16-pin QFN package with the following pin configuration: 1. VDD 2. SDA/SDI 3. SCL/SCLK 4. INT1 5. GND 6. GND 7. XOUT 8. YOUT 9. ZOUT 10. GND 11. GND 12. VDD 13. CS 14. ST 15. INT2 16. GND

Functional Features

  • High sensitivity and resolution for accurate motion detection
  • Low power consumption for extended battery life
  • Flexible output data rate for diverse application requirements
  • Digital output interface for easy integration with microcontrollers

Advantages and Disadvantages

Advantages

  • Accurate motion sensing
  • Low power consumption
  • Small form factor

Disadvantages

  • Limited maximum g-force range compared to some alternatives
  • Requires careful PCB layout for optimal performance

Working Principles

The MMA8453QR1 operates based on the principle of capacitive sensing, where changes in capacitance due to motion are converted into digital signals. The built-in signal processing algorithms ensure accurate measurement of acceleration along the X, Y, and Z axes.

Detailed Application Field Plans

The MMA8453QR1 finds applications in various fields, including: - Consumer Electronics: Mobile devices, gaming controllers, wearable devices - Automotive: Vehicle stability control, rollover detection, impact sensing - Industrial: Equipment monitoring, vibration analysis, tilt sensing

Detailed and Complete Alternative Models

Some alternative models to the MMA8453QR1 include: - LIS3DH: Another 3-axis accelerometer with similar features and performance - ADXL345: Known for its wide dynamic range and high resolution - BMA250: Compact and low-power accelerometer suitable for portable devices

In conclusion, the MMA8453QR1 offers high-performance motion sensing capabilities in a compact and energy-efficient package, making it suitable for a wide range of applications across different industries.

[Word Count: 443]

技術ソリューションにおける MMA8453QR1 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MMA8453QR1?

    • The MMA8453QR1 is a 3-axis accelerometer sensor manufactured by NXP Semiconductors, designed to measure acceleration in various technical applications.

  2. What are the key features of the MMA8453QR1?

    • The key features of the MMA8453QR1 include a digital output, low power consumption, high sensitivity, and a wide dynamic range.

  3. How is the MMA8453QR1 typically used in technical solutions?

    • The MMA8453QR1 is commonly used for motion detection, tilt sensing, vibration monitoring, and orientation detection in applications such as industrial equipment, consumer electronics, and wearable devices.

  4. What are the communication interfaces supported by the MMA8453QR1?

    • The MMA8453QR1 supports I2C and SPI communication interfaces for interfacing with microcontrollers and other digital systems.

  5. What is the operating voltage range of the MMA8453QR1?

    • The MMA8453QR1 operates within a voltage range of 1.95V to 3.6V, making it suitable for a wide variety of battery-powered and low-power applications.

  6. Can the MMA8453QR1 withstand harsh environmental conditions?

    • The MMA8453QR1 is designed to be robust and can withstand moderate levels of shock and vibration, making it suitable for use in industrial and automotive applications.

  7. What is the resolution of the MMA8453QR1?

    • The MMA8453QR1 has a user-selectable resolution of up to 14 bits, allowing for precise measurement of acceleration in technical solutions.

  8. Does the MMA8453QR1 have built-in motion detection features?

    • Yes, the MMA8453QR1 includes built-in motion detection capabilities, which can be configured to trigger interrupts based on specific acceleration thresholds.

  9. Is the MMA8453QR1 suitable for battery-powered applications?

    • Yes, the low power consumption of the MMA8453QR1 makes it well-suited for battery-powered applications, extending the device's operational lifetime.

  10. Are there any application notes or reference designs available for the MMA8453QR1?

    • Yes, NXP provides comprehensive application notes, reference designs, and software libraries to assist engineers in integrating the MMA8453QR1 into their technical solutions effectively.