NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MMA6827BKWR2
詳細を表示 DataSheets

MMA6827BKWR2

Product Overview

Category

The MMA6827BKWR2 belongs to the category of motion sensors, specifically an accelerometer.

Use

It is used for measuring acceleration and tilt in various applications such as automotive, industrial, and consumer electronics.

Characteristics

  • High sensitivity
  • Low power consumption
  • Wide measurement range
  • Compact size

Package

The sensor comes in a small surface-mount package.

Essence

The essence of the MMA6827BKWR2 lies in its ability to accurately measure acceleration and tilt in a compact and energy-efficient manner.

Packaging/Quantity

The sensor is typically packaged in reels and is available in varying quantities based on customer requirements.

Specifications

  • Measurement Range: ±2g, ±4g, ±8g, ±16g
  • Output Resolution: 14-bit
  • Operating Voltage: 1.71V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Output Interface: I2C/SPI

Detailed Pin Configuration

The MMA6827BKWR2 has a standard pin configuration with pins for power supply, ground, communication interface, and output signals.

Functional Features

  • High accuracy and resolution
  • Low noise and drift
  • Built-in self-test functionality
  • Flexible output interfaces (I2C/SPI)

Advantages

  • Accurate measurement across a wide range of accelerations
  • Low power consumption for extended battery life
  • Small form factor for easy integration into various devices
  • Self-test feature for enhanced reliability

Disadvantages

  • Limited measurement range compared to some other accelerometers
  • Higher cost compared to lower-end accelerometers

Working Principles

The MMA6827BKWR2 operates based on the principles of microelectromechanical systems (MEMS) technology, where the movement of microscopic structures within the sensor generates electrical signals proportional to the applied acceleration.

Detailed Application Field Plans

Automotive

In automotive applications, the MMA6827BKWR2 can be used for vehicle stability control, rollover detection, and impact sensing.

Industrial

In industrial settings, the sensor can be utilized for vibration monitoring, equipment health monitoring, and structural health monitoring.

Consumer Electronics

For consumer electronics, the sensor can enable features such as screen rotation, gaming control, and activity tracking in wearable devices.

Detailed and Complete Alternative Models

  • MMA8452Q: Offers similar performance with a different form factor
  • ADXL345: Provides comparable functionality with a different output interface
  • BMA280: A cost-effective alternative with slightly lower performance

This completes the English editing encyclopedia entry structure format for MMA6827BKWR2, covering its product details, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

技術ソリューションにおける MMA6827BKWR2 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MMA6827BKWR2?

    • The MMA6827BKWR2 is a high-performance, low-power, three-axis accelerometer designed for various technical solutions.

  2. What are the key features of the MMA6827BKWR2?

    • The key features include low power consumption, high accuracy, digital output, and a wide operating voltage range.

  3. How can the MMA6827BKWR2 be used in motion detection applications?

    • The MMA6827BKWR2 can be used to detect motion in applications such as pedometers, activity monitors, and gesture recognition systems.

  4. What are the typical power requirements for the MMA6827BKWR2?

    • The MMA6827BKWR2 typically operates on a low supply voltage and consumes minimal power, making it suitable for battery-powered devices.

  5. Can the MMA6827BKWR2 be used in automotive applications?

    • Yes, the MMA6827BKWR2 is suitable for automotive applications such as vehicle stability control, rollover detection, and impact sensing.

  6. What communication interfaces does the MMA6827BKWR2 support?

    • The MMA6827BKWR2 supports standard digital interfaces such as I2C and SPI for easy integration with microcontrollers and other devices.

  7. Is the MMA6827BKWR2 suitable for harsh environments?

    • Yes, the MMA6827BKWR2 is designed to withstand harsh environmental conditions and is well-suited for industrial and outdoor applications.

  8. What are the potential challenges when integrating the MMA6827BKWR2 into a design?

    • Challenges may include proper PCB layout for noise immunity, calibration for accurate measurements, and understanding the device's digital interface requirements.

  9. Can the MMA6827BKWR2 be used for vibration monitoring in industrial equipment?

    • Yes, the MMA6827BKWR2 can be utilized for vibration monitoring in industrial equipment to detect anomalies and prevent potential failures.

  10. Are there any specific application notes or reference designs available for the MMA6827BKWR2?

    • Yes, the manufacturer provides application notes, reference designs, and technical support to assist with the integration of the MMA6827BKWR2 into various technical solutions.