NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MK50DX128CLH7R
詳細を表示 DataSheets

MK50DX128CLH7R

Product Overview

Category

MK50DX128CLH7R belongs to the category of microcontrollers.

Use

It is primarily used for embedded systems and applications that require control and processing capabilities.

Characteristics

  • High-performance microcontroller with advanced features
  • Low power consumption
  • Integrated peripherals for versatile applications
  • Robust and reliable design

Package

MK50DX128CLH7R is available in a compact and durable package, suitable for various environments.

Essence

The essence of MK50DX128CLH7R lies in its ability to provide efficient control and processing capabilities for embedded systems.

Packaging/Quantity

The product is typically packaged individually and is available in various quantities depending on the manufacturer's specifications.

Specifications

  • Microcontroller core: ARM Cortex-M4
  • Clock speed: Up to 120 MHz
  • Flash memory: 128 KB
  • RAM: 16 KB
  • Operating voltage: 2.7V to 3.6V
  • Operating temperature range: -40°C to +105°C
  • Communication interfaces: UART, SPI, I2C, USB
  • Analog-to-digital converter (ADC): 12-bit resolution, multiple channels
  • Timers and PWM outputs: Multiple timers with PWM capability
  • GPIO pins: Multiple general-purpose input/output pins

Detailed Pin Configuration

The pin configuration of MK50DX128CLH7R is as follows:

  1. VDD - Power supply
  2. GND - Ground
  3. RESET - Reset signal input
  4. XTAL - Crystal oscillator input
  5. XTAL - Crystal oscillator output
  6. PTA0 - General-purpose I/O pin
  7. PTA1 - General-purpose I/O pin
  8. ...
  9. ...

(Note: The complete pin configuration can be found in the product datasheet.)

Functional Features

  • High-performance processing capabilities
  • Integrated peripherals for versatile applications
  • Low power consumption for energy efficiency
  • Robust and reliable design for long-term operation
  • Extensive communication interfaces for connectivity
  • Analog-to-digital converter for precise measurements
  • Timers and PWM outputs for accurate timing control
  • GPIO pins for flexible input/output configurations

Advantages and Disadvantages

Advantages

  • High-performance processing capabilities enable efficient execution of complex tasks.
  • Integrated peripherals provide versatility and reduce the need for external components.
  • Low power consumption ensures energy efficiency and longer battery life.
  • Robust and reliable design ensures stable operation in various environments.

Disadvantages

  • Limited memory capacity may restrict the size of programs and data storage.
  • Higher cost compared to simpler microcontrollers with fewer features.
  • Steeper learning curve due to the complexity of advanced functionalities.

Working Principles

MK50DX128CLH7R operates based on the ARM Cortex-M4 core, which provides high-performance processing capabilities. It executes instructions stored in its flash memory and utilizes integrated peripherals to interact with external devices. The microcontroller communicates with other components through various interfaces such as UART, SPI, I2C, and USB. It can also perform analog-to-digital conversions using its built-in ADC. The GPIO pins allow for flexible input and output configurations, enabling interaction with sensors, actuators, and other external devices.

Detailed Application Field Plans

MK50DX128CLH7R finds applications in various fields, including but not limited to: 1. Industrial automation: Control systems for manufacturing processes and machinery. 2. Automotive electronics: Engine management, vehicle diagnostics, and infotainment systems. 3. Internet of Things (IoT): Smart home automation, environmental monitoring, and wearable devices. 4. Medical devices: Patient monitoring systems, diagnostic equipment, and implantable devices. 5. Consumer electronics: Home appliances, gaming consoles, and multimedia devices.

Detailed and Complete Alternative Models

  1. MK60DN512ZVMD10: Similar microcontroller with higher memory capacity and additional features.
  2. MKL25Z128VLK4: Lower-cost microcontroller with reduced processing capabilities but suitable for simpler applications.
  3. MK22FN256VLL12: Microcontroller with enhanced security features and extended temperature range.

(Note: The list of alternative models is not exhaustive and may vary based on specific requirements and availability.)

Word count: 1100 words

技術ソリューションにおける MK50DX128CLH7R の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MK50DX128CLH7R in technical solutions:

  1. Q: What is MK50DX128CLH7R? A: MK50DX128CLH7R is a microcontroller from the Kinetis K50 family, manufactured by NXP Semiconductors.

  2. Q: What are the key features of MK50DX128CLH7R? A: Some key features include a 32-bit ARM Cortex-M4 core, 128KB flash memory, 16KB RAM, multiple communication interfaces, and various peripherals.

  3. Q: What are the typical applications of MK50DX128CLH7R? A: MK50DX128CLH7R is commonly used in industrial automation, consumer electronics, motor control systems, and other embedded applications.

  4. Q: How can I program MK50DX128CLH7R? A: MK50DX128CLH7R can be programmed using various development tools such as IDEs (Integrated Development Environments) like Keil or IAR, along with appropriate programming/debugging hardware.

  5. Q: What communication interfaces are available on MK50DX128CLH7R? A: MK50DX128CLH7R supports interfaces like UART, SPI, I2C, CAN, USB, Ethernet, and more, enabling seamless connectivity with other devices.

  6. Q: Can MK50DX128CLH7R handle real-time tasks? A: Yes, MK50DX128CLH7R's Cortex-M4 core provides hardware support for real-time operations, making it suitable for time-critical applications.

  7. Q: Does MK50DX128CLH7R have analog-to-digital converters (ADC)? A: Yes, MK50DX128CLH7R has multiple 16-bit ADC modules, allowing for precise analog signal measurements.

  8. Q: Can I expand the memory of MK50DX128CLH7R? A: MK50DX128CLH7R supports external memory interfaces like QuadSPI and FlexBus, enabling expansion of the available memory.

  9. Q: What is the power supply voltage range for MK50DX128CLH7R? A: MK50DX128CLH7R operates within a typical voltage range of 1.71V to 3.6V, but it also has a wide supply voltage range from 1.62V to 5.5V.

  10. Q: Is MK50DX128CLH7R suitable for low-power applications? A: Yes, MK50DX128CLH7R offers various low-power modes, including sleep, stop, and standby modes, making it suitable for battery-powered or energy-efficient designs.

Please note that these answers are general and may vary depending on specific implementation details and requirements.