NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MC68HC908JK8CDW
詳細を表示 DataSheets

MC68HC908JK8CDW

Product Overview

Category

The MC68HC908JK8CDW belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for control and processing purposes.

Characteristics

  • High-performance 8-bit microcontroller
  • Low power consumption
  • Integrated memory and peripherals
  • Flexible input/output options
  • Wide operating voltage range

Package

The MC68HC908JK8CDW is available in a small outline package (SOIC) format.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact and low-power package.

Packaging/Quantity

The MC68HC908JK8CDW is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 8 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 512 bytes
  • Operating Voltage Range: 2.7V to 5.5V
  • Number of I/O Pins: 20
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Timers/Counters: 2 x 16-bit, 1 x 8-bit
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC68HC908JK8CDW has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. PTA0 - General-purpose I/O pin
  3. PTA1 - General-purpose I/O pin
  4. PTA2 - General-purpose I/O pin
  5. PTA3 - General-purpose I/O pin
  6. PTA4 - General-purpose I/O pin
  7. PTA5 - General-purpose I/O pin
  8. PTA6 - General-purpose I/O pin
  9. PTA7 - General-purpose I/O pin
  10. RESET - Reset pin
  11. PTB0 - General-purpose I/O pin
  12. PTB1 - General-purpose I/O pin
  13. PTB2 - General-purpose I/O pin
  14. PTB3 - General-purpose I/O pin
  15. PTB4 - General-purpose I/O pin
  16. PTB5 - General-purpose I/O pin
  17. PTB6 - General-purpose I/O pin
  18. PTB7 - General-purpose I/O pin
  19. VSS - Ground
  20. VDD - Power supply voltage

Functional Features

  • High-speed processing capabilities
  • On-chip memory for program storage and data handling
  • Multiple communication interfaces for seamless integration with other devices
  • Analog-to-digital converter for sensor interfacing
  • Timers/counters for precise timing and event management
  • Low power consumption for energy-efficient operation

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable and battery-powered applications.
  • Integrated peripherals reduce the need for external components, saving cost and board space.
  • Wide operating voltage range allows for flexibility in different power supply scenarios.

Disadvantages

  • Limited program memory size may restrict the complexity of applications that can be implemented.
  • Being an 8-bit microcontroller, it may not be suitable for computationally intensive tasks.

Working Principles

The MC68HC908JK8CDW operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory to perform various tasks, such as data processing, control, and communication. The microcontroller interacts with external devices through its input/output pins and utilizes its integrated peripherals to perform specific functions.

Detailed Application Field Plans

The MC68HC908JK8CDW finds applications in various fields, including but not limited to: - Consumer electronics - Industrial automation - Automotive systems - Medical devices - Home appliances

In consumer electronics, it can be used in remote controls, smart home devices, and portable gadgets. In industrial automation, it can be employed for process control, monitoring, and data acquisition. In automotive systems, it can be utilized for engine management, dashboard control, and safety features. In medical devices, it can be applied in patient monitoring equipment and diagnostic tools. In home appliances, it can be integrated into smart appliances for enhanced functionality.

Alternative Models

Some alternative models that offer similar functionalities to the MC68HC908JK8CDW include: - ATmega328P by Microchip Technology - PIC16F877A by Microchip Technology - STM32F103C8T6 by STMicroelectronics - MSP430G2553 by Texas Instruments

These alternatives

技術ソリューションにおける MC68HC908JK8CDW の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MC68HC908JK8CDW in technical solutions:

  1. Q: What is MC68HC908JK8CDW? A: MC68HC908JK8CDW is a microcontroller from the HC08 family, manufactured by Freescale (now NXP). It is commonly used in various technical solutions for embedded systems.

  2. Q: What are the key features of MC68HC908JK8CDW? A: Some key features of MC68HC908JK8CDW include an 8-bit CPU core, 8KB of flash memory, 512 bytes of RAM, multiple I/O ports, timers, analog-to-digital converter (ADC), and serial communication interfaces.

  3. Q: What are the typical applications of MC68HC908JK8CDW? A: MC68HC908JK8CDW is often used in applications such as automotive electronics, industrial control systems, consumer electronics, medical devices, and home automation.

  4. Q: How can I program MC68HC908JK8CDW? A: MC68HC908JK8CDW can be programmed using assembly language or high-level programming languages like C/C++. You will need a compatible programmer/debugger and appropriate software tools.

  5. Q: Can I use MC68HC908JK8CDW for real-time applications? A: Yes, MC68HC908JK8CDW can be used for real-time applications. It has built-in timers and interrupt capabilities that allow precise timing and event-driven processing.

  6. Q: Does MC68HC908JK8CDW support analog inputs? A: Yes, MC68HC908JK8CDW has an integrated analog-to-digital converter (ADC) that allows you to read analog signals from external sensors or devices.

  7. Q: Can I communicate with other devices using MC68HC908JK8CDW? A: Yes, MC68HC908JK8CDW supports various serial communication interfaces like UART, SPI, and I2C, which enable communication with other devices such as sensors, displays, or external memory.

  8. Q: What is the power supply requirement for MC68HC908JK8CDW? A: MC68HC908JK8CDW typically operates at a voltage range of 2.7V to 5.5V, making it compatible with a wide range of power supply options.

  9. Q: Are there any development boards available for MC68HC908JK8CDW? A: Yes, there are development boards specifically designed for MC68HC908JK8CDW that provide easy prototyping and debugging capabilities. These boards often come with necessary connectors and peripherals.

  10. Q: Where can I find more resources and documentation for MC68HC908JK8CDW? A: You can find more information, datasheets, application notes, and software tools on the official NXP website or by referring to online communities and forums dedicated to embedded systems and microcontrollers.