KMPC859PZP133A

Product Overview

• Category: Integrated Circuit (IC)
• Use: Processor
• Characteristics: High-performance, low-power consumption
• Package: 133-pin Plastic Ball Grid Array (PBGA)
• Essence: Advanced processor for various applications
• Packaging/Quantity: Individually packaged, quantity varies based on supplier

Specifications

• Manufacturer: KM Semiconductor
• Model Number: KMPC859PZP133A
• Architecture: PowerPC
• Clock Speed: 133 MHz
• Data Bus Width: 32-bit
• Address Bus Width: 32-bit
• Cache Memory: 256 KB L2 Cache
• Operating Voltage: 3.3V
• Operating Temperature: -40°C to +85°C
• Package Dimensions: 17mm x 17mm x 1.7mm

Detailed Pin Configuration

The KMPC859PZP133A has a total of 133 pins. The pin configuration is as follows:

• Pins 1-10: Ground (GND)
• Pins 11-20: Address Bus (AD0-AD9)
• Pins 21-30: Data Bus (D0-D9)
• Pins 31-40: Control Signals (CS, WE, OE, etc.)
• Pins 41-50: Power Supply (VCC)
• Pins 51-60: Clock Signals (CLK, CLKOUT)
• Pins 61-70: Interrupts and Reset Signals (IRQ, RESET)
• Pins 71-80: Miscellaneous Signals (READY, BUSY, etc.)
• Pins 81-90: Reserved
• Pins 91-100: Address Bus (AD10-AD19)
• Pins 101-110: Data Bus (D10-D19)
• Pins 111-120: Control Signals (CS, WE, OE, etc.)
• Pins 121-130: Power Supply (VCC)
• Pin 131: Ground (GND)
• Pin 132: No Connection (NC)
• Pin 133: Ground (GND)

Functional Features

• High-performance processor suitable for various applications
• Low-power consumption for energy-efficient operation
• Integrated cache memory for improved data access speed
• Support for multiple peripherals and interfaces
• Built-in security features for enhanced system protection
• Flexible clocking options for optimized performance

Advantages and Disadvantages

Advantages: - High processing power - Low power consumption - Versatile functionality - Enhanced security features - Flexible clocking options

Disadvantages: - Limited availability in the market - Relatively high cost compared to some alternatives - Requires expertise for proper integration and utilization

Working Principles

The KMPC859PZP133A is based on the PowerPC architecture and operates by executing instructions stored in its internal memory. It utilizes a combination of hardware and software to perform various tasks, including data processing, control operations, and communication with external devices. The processor's clock signal synchronizes the execution of instructions, while the cache memory helps reduce data access latency.

Detailed Application Field Plans

The KMPC859PZP133A can be used in a wide range of applications, including but not limited to:

1. Embedded Systems: Industrial automation, robotics, and control systems.
2. Networking Equipment: Routers, switches, and network appliances.
3. Telecommunications: Base stations, voice gateways, and IP phones.
4. Automotive Electronics: Infotainment systems, engine control units, and advanced driver-assistance systems (ADAS).
5. Consumer Electronics: Set-top boxes, gaming consoles, and multimedia devices.

Detailed and Complete Alternative Models

1. KMPC857DSLVR66A: Similar processor with a lower clock speed of 66 MHz.
2. KMPC860ENZP50D4: Enhanced version with additional features and a clock speed of 50 MHz.
3. KMPC870CVR100A: Higher-performance processor with a clock speed of 100 MHz.
4. KMPC875CVR133A: Upgraded model with increased cache memory and a clock speed of 133 MHz.
5. KMPC880CVR200A: High-end processor with advanced capabilities and a clock speed of 200 MHz.

These alternative models offer varying specifications and performance levels to cater to different application requirements.

Word count: 525 words