NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
I74F657D,112
詳細を表示 DataSheets

I74F657D,112

Product Overview

Category

The I74F657D,112 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronics for data multiplexing and demultiplexing applications.

Characteristics

  • The I74F657D,112 is a high-speed, 8-bit multiplexer/demultiplexer.
  • It operates on a wide voltage range, typically between 4.5V and 5.5V.
  • This IC offers low power consumption and high noise immunity.
  • It is designed to be compatible with various logic families, including TTL, CMOS, and LSTTL.

Package

The I74F657D,112 is available in a standard 20-pin dual in-line package (DIP).

Essence

The essence of this IC lies in its ability to efficiently route data signals from multiple sources to a single destination or vice versa.

Packaging/Quantity

The I74F657D,112 is typically sold in reels containing 250 units per reel.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Input Voltage High: 2.0V (min), 3.85V (max)
  • Input Voltage Low: -0.5V (min), 0.8V (max)
  • Output Voltage High: 2.4V (min), VCC (max)
  • Output Voltage Low: -0.5V (min), 0.55V (max)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The I74F657D,112 has a total of 20 pins. Here is the detailed pin configuration:

  1. A0 - Multiplexer/Demultiplexer Address Input
  2. A1 - Multiplexer/Demultiplexer Address Input
  3. A2 - Multiplexer/Demultiplexer Address Input
  4. A3 - Multiplexer/Demultiplexer Address Input
  5. A4 - Multiplexer/Demultiplexer Address Input
  6. A5 - Multiplexer/Demultiplexer Address Input
  7. A6 - Multiplexer/Demultiplexer Address Input
  8. A7 - Multiplexer/Demultiplexer Address Input
  9. E1 - Enable Input (Active LOW)
  10. E2 - Enable Input (Active LOW)
  11. I/O0 - Data Input/Output
  12. I/O1 - Data Input/Output
  13. I/O2 - Data Input/Output
  14. I/O3 - Data Input/Output
  15. I/O4 - Data Input/Output
  16. I/O5 - Data Input/Output
  17. I/O6 - Data Input/Output
  18. I/O7 - Data Input/Output
  19. VCC - Positive Power Supply
  20. GND - Ground

Functional Features

  • The I74F657D,112 can function as an 8:1 multiplexer or a 1:8 demultiplexer.
  • It offers a wide operating voltage range, making it compatible with various digital systems.
  • This IC provides high-speed data transmission, enabling efficient signal routing.
  • It has built-in enable inputs for easy control of the multiplexing/demultiplexing operation.

Advantages and Disadvantages

Advantages

  • High-speed operation allows for quick data processing.
  • Wide voltage range compatibility enhances versatility.
  • Low power consumption contributes to energy efficiency.
  • High noise immunity ensures reliable signal transmission.

Disadvantages

  • Limited number of input/output channels compared to some other ICs.
  • Requires careful handling due to its small size and delicate pins.

Working Principles

The I74F657D,112 operates based on the principles of multiplexing and demultiplexing. When used as a multiplexer, it selects one of the eight input channels and routes its data to the output line based on the address inputs. In demultiplexer mode, it performs the reverse operation by distributing the input data to one of the eight output lines based on the address inputs.

Detailed Application Field Plans

The I74F657D,112 finds applications in various digital systems, including but not limited to: - Data communication networks - Microprocessor-based systems - Industrial automation - Instrumentation and measurement equipment - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the I74F657D,112 include: - SN74LS157 - CD4051B - MC14051B - 74HC151

These alternatives can be considered based on specific requirements and compatibility with the existing system.

In conclusion, the I74F657D,112 is a versatile integrated circuit used for data multiplexing and demultiplexing applications

技術ソリューションにおける I74F657D,112 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of I74F657D,112 in technical solutions:

  1. Q: What is the I74F657D,112? A: The I74F657D,112 is a specific integrated circuit (IC) chip used in digital electronics for various technical applications.

  2. Q: What are the main features of the I74F657D,112? A: The I74F657D,112 is a 16-bit bus transceiver with parity generator/checker and three-state outputs. It has multiple control inputs and outputs for data transmission and error detection.

  3. Q: How can I use the I74F657D,112 in my technical solution? A: The I74F657D,112 can be used as a bidirectional data buffer, allowing data to be transmitted between two systems or devices with different voltage levels or signal formats.

  4. Q: What is the purpose of the parity generator/checker in the I74F657D,112? A: The parity generator/checker in the I74F657D,112 helps detect errors in data transmission by generating or checking parity bits. It ensures data integrity and can be useful in error-critical applications.

  5. Q: Can I use multiple I74F657D,112 chips together in my design? A: Yes, you can use multiple I74F657D,112 chips together to expand the number of data lines or create larger bus systems. They can be cascaded or connected in parallel depending on your requirements.

  6. Q: What is the maximum operating frequency of the I74F657D,112? A: The maximum operating frequency of the I74F657D,112 depends on various factors such as supply voltage, temperature, and load capacitance. Please refer to the datasheet for specific details.

  7. Q: Can I interface the I74F657D,112 with different logic families? A: Yes, the I74F657D,112 is designed to be compatible with various logic families such as TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor). It can be used in mixed logic environments.

  8. Q: Does the I74F657D,112 require any external components for operation? A: The I74F657D,112 may require external resistors or capacitors for proper termination or noise filtering, depending on your specific application. Consult the datasheet for recommended external components.

  9. Q: What are the power supply requirements for the I74F657D,112? A: The I74F657D,112 typically operates with a supply voltage of 5V, but it can also work with lower voltages within its specified range. Refer to the datasheet for detailed information on power supply requirements.

  10. Q: Where can I find more information about the I74F657D,112? A: You can find detailed information about the I74F657D,112 in its datasheet, which is usually available from the manufacturer's website or through authorized distributors.