74AHCT241PW,118

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Buffer/Line Driver
• Characteristics: High-speed, low-power, CMOS technology
• Package: TSSOP-20
• Essence: Logic gate with 8-bit buffer/driver functionality
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 4.5V to 5.5V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Operating Temperature Range: -40°C to +125°C
• Input Capacitance: 3.5pF
• Output Capacitance: 6pF
• Propagation Delay Time: 7ns (max)
• Output Current: ±8mA

Detailed Pin Configuration

1. GND (Ground)
2. A1 (Input/Output)
3. OE (Output Enable)
4. Y1 (Output)
5. A2 (Input/Output)
6. Y2 (Output)
7. A3 (Input/Output)
8. GND (Ground)
9. A4 (Input/Output)
10. Y3 (Output)
11. A5 (Input/Output)
12. Y4 (Output)
13. VCC (Supply Voltage)
14. A6 (Input/Output)
15. Y5 (Output)
16. A7 (Input/Output)
17. Y6 (Output)
18. A8 (Input/Output)
19. GND (Ground)
20. Y7 (Output)

Functional Features

• The 74AHCT241PW,118 is an octal buffer/line driver IC.
• It provides non-inverting buffers with 3-state outputs.
• The device is designed to drive heavily loaded 3-state buses, memory address drivers, and other applications requiring high-speed and low-power CMOS technology.
• It features a symmetrical output impedance with both sourcing and sinking capabilities.

Advantages

• High-speed operation allows for efficient data transmission.
• Low-power consumption makes it suitable for battery-powered devices.
• CMOS technology provides improved noise immunity and reduced power dissipation.
• Symmetrical output impedance ensures reliable signal integrity.

Disadvantages

• Limited output current may restrict its use in certain high-current applications.
• Sensitivity to electrostatic discharge (ESD) requires proper handling during assembly and usage.

Working Principles

• The 74AHCT241PW,118 operates by receiving input signals on the A1-A8 pins.
• When the OE (Output Enable) pin is high, the outputs Y1-Y7 follow the inputs A1-A7.
• When the OE pin is low, the outputs are in a high-impedance state (disconnected).
• The device uses CMOS technology to achieve high-speed operation and low-power consumption.

Detailed Application Field Plans

The 74AHCT241PW,118 can be used in various applications, including: 1. Data communication systems 2. Memory address drivers 3. Bus interface circuits 4. Industrial control systems 5. Automotive electronics 6. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that provide similar functionality to the 74AHCT241PW,118 include: - SN74AHCT241N - MC74AHCT241N - CD74AHCT241E - 74HC241D

Note: These alternative models may have slight differences in specifications and package types.

This entry provides an overview of the 74AHCT241PW,118 integrated circuit, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.