Nuvoton Technology Corporation of America
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NAU8822AYG
詳細を表示 DataSheets

NAU8822AYG

Product Overview

Category

The NAU8822AYG belongs to the category of audio codecs.

Use

It is primarily used for audio signal processing and conversion in various electronic devices such as smartphones, tablets, portable media players, and other consumer electronics.

Characteristics

  • High-quality audio performance
  • Low power consumption
  • Compact size
  • Integrated digital-to-analog converter (DAC) and analog-to-digital converter (ADC)
  • Support for multiple audio formats
  • Flexible input/output configurations

Package

The NAU8822AYG is available in a small form factor package, typically a 32-pin QFN (Quad Flat No-Lead) package.

Essence

The essence of the NAU8822AYG lies in its ability to provide high-fidelity audio processing and conversion capabilities in a compact and efficient package.

Packaging/Quantity

The NAU8822AYG is usually packaged in reels or trays, with a typical quantity of 2500 units per reel.

Specifications

  • Supply voltage: 1.8V - 3.6V
  • Audio format support: PCM, I2S, TDM
  • Sampling rates: 8kHz - 96kHz
  • Total harmonic distortion + noise (THD+N): <0.01%
  • Signal-to-noise ratio (SNR): >90dB
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The NAU8822AYG has a total of 32 pins, each serving a specific function. The pin configuration is as follows:

  1. VDDIO
  2. GND
  3. MICBIAS
  4. MICN
  5. MICP
  6. LINEINL
  7. LINEINR
  8. HPLOUTL
  9. HPLOUTR
  10. HPLCOM
  11. HPLOUTL2
  12. HPLOUTR2
  13. LINEOUTL
  14. LINEOUTR
  15. SPKOUTL
  16. SPKOUTR
  17. SPKOUTL2
  18. SPKOUTR2
  19. VDDA
  20. VSSA
  21. VREF
  22. BCLK
  23. LRCK
  24. SDIN
  25. SDOUT
  26. MCLK
  27. RESET
  28. GPIO1
  29. GPIO2
  30. GPIO3
  31. GPIO4
  32. GND

Functional Features

  • Integrated audio codec with DAC and ADC
  • Programmable digital filters for audio signal processing
  • Built-in microphone bias voltage generation
  • Headphone and line output drivers
  • Speaker output drivers
  • Flexible input/output routing options
  • Power management features for low power consumption
  • I2C control interface for easy configuration

Advantages and Disadvantages

Advantages

  • High-quality audio performance
  • Low power consumption
  • Compact size
  • Versatile audio format support
  • Flexible input/output configurations

Disadvantages

  • Limited pin count may restrict certain advanced audio functionalities
  • Requires external components for complete audio system integration

Working Principles

The NAU8822AYG operates by receiving digital audio data from a host device, such as a microcontroller or digital audio processor. It then processes the audio data using its internal digital filters and converts it into analog signals through the integrated DAC. The analog signals can be routed to various outputs, such as headphones, speakers, or line outputs. Similarly, incoming analog audio signals can be converted to digital format using the integrated ADC and processed further if required.

Detailed Application Field Plans

The NAU8822AYG finds applications in various electronic devices, including but not limited to: - Smartphones - Tablets - Portable media players - Digital audio players - Gaming consoles - Automotive infotainment systems

Detailed and Complete Alternative Models

Some alternative models to the NAU8822AYG that offer similar functionality and features include: - MAX98357A from Maxim Integrated - CS42L42 from Cirrus Logic - WM8731 from Cirrus Logic - TLV320DAC3100 from Texas Instruments - AK4556 from AKM Semiconductor

These alternative models can be considered based on specific requirements and design considerations.

Word count: 550 words

技術ソリューションにおける NAU8822AYG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of NAU8822AYG in technical solutions:

  1. Q: What is NAU8822AYG? A: NAU8822AYG is a highly integrated audio codec designed for portable applications, offering high-quality audio playback and recording capabilities.

  2. Q: What are the key features of NAU8822AYG? A: Some key features of NAU8822AYG include stereo ADC and DAC, programmable gain amplifiers, digital filters, microphone bias, and various audio interfaces.

  3. Q: What are the typical applications of NAU8822AYG? A: NAU8822AYG is commonly used in smartphones, tablets, portable media players, gaming devices, voice recorders, and other portable audio devices.

  4. Q: How does NAU8822AYG achieve high-quality audio playback? A: NAU8822AYG utilizes advanced digital signal processing algorithms, low noise floor, and high dynamic range to ensure high-quality audio playback.

  5. Q: Can NAU8822AYG support multiple audio input sources? A: Yes, NAU8822AYG supports multiple audio input sources such as line-in, microphone, and digital audio interface inputs.

  6. Q: Does NAU8822AYG have built-in audio mixing capabilities? A: Yes, NAU8822AYG has built-in audio mixing capabilities that allow users to mix multiple audio sources together.

  7. Q: Can NAU8822AYG be controlled through software? A: Yes, NAU8822AYG can be controlled through software using I2C or SPI interface, allowing for easy configuration and control.

  8. Q: Does NAU8822AYG support audio playback in different formats? A: Yes, NAU8822AYG supports various audio formats including PCM, I2S, and TDM, making it versatile for different applications.

  9. Q: What power supply requirements does NAU8822AYG have? A: NAU8822AYG typically operates on a single 3.3V power supply, making it suitable for low-power portable devices.

  10. Q: Are there any evaluation boards or reference designs available for NAU8822AYG? A: Yes, Nuvoton provides evaluation boards and reference designs that can help developers quickly prototype and integrate NAU8822AYG into their solutions.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.