NPIC6C596BQ-Q100,1

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Shift Register
• Characteristics: Serial-In, Parallel-Out, 8-Bit, Non-Inverting
• Package: QFN (Quad Flat No-Lead)
• Essence: High-performance shift register IC
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 2.3V to 5.5V
• Input Voltage: 0V to VCC
• Output Voltage: 0V to VCC
• Operating Temperature Range: -40°C to +125°C
• Maximum Clock Frequency: 25MHz
• Number of Bits: 8
• Output Type: Non-Inverting
• Package Dimensions: 3mm x 3mm

Detailed Pin Configuration

The NPIC6C596BQ-Q100,1 has a total of 20 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | SER | Serial Data Input | | 2 | RCLK | Register Clock Input | | 3 | SRCLK | Shift Register Clock Input | | 4 | OE | Output Enable Input | | 5-12 | QA-QH | Parallel Outputs | | 13 | GND | Ground | | 14 | VCC | Supply Voltage | | 15-20 | NC | No Connection |

Functional Features

• Serial-in, parallel-out operation
• Non-inverting outputs
• Wide operating voltage range
• High-speed clock frequency support
• Output enable control for power-saving mode

Advantages and Disadvantages

Advantages: - Compact package size - Wide operating voltage range allows for versatile applications - High-speed clock frequency support enables fast data transfer - Non-inverting outputs ensure accurate signal transmission

Disadvantages: - Limited number of bits (8) - No connection pins may require additional care during PCB layout

Working Principles

The NPIC6C596BQ-Q100,1 is a shift register IC that allows serial data to be loaded and then shifted out in parallel. The SER pin is used to input the serial data, which is then synchronized with the SRCLK (Shift Register Clock) input. The RCLK (Register Clock) input latches the parallel data into the output registers. The outputs QA-QH represent the parallel data stored in the shift register. The OE (Output Enable) input controls the output state, allowing for power-saving mode when disabled.

Detailed Application Field Plans

The NPIC6C596BQ-Q100,1 is commonly used in various applications, including but not limited to: - LED matrix displays - LED driver circuits - Serial-to-parallel data conversion - Data storage and retrieval systems - Industrial automation control systems

Detailed and Complete Alternative Models

• SN74HC595: 8-bit shift register with similar functionality
• CD4094: 8-bit serial-in, parallel-out shift register with latch
• TPIC6B595: Power logic shift register with open-drain outputs

Note: This is not an exhaustive list, and there are several alternative models available in the market.

In conclusion, the NPIC6C596BQ-Q100,1 is a high-performance shift register IC with serial-in, parallel-out operation. It offers advantages such as compact size, wide operating voltage range, and high-speed clock frequency support. However, it has limitations in terms of the number of bits and requires careful consideration of the no connection pins during PCB layout. It finds applications in LED displays, data conversion, and industrial automation control systems. Alternative models like SN74HC595 and CD4094 can be considered based on specific requirements.