MPQ4485GU-AEC1-P

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: QFN-20
• Essence: Voltage Regulator
• Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.6V to VIN
• Maximum Output Current: 3A
• Switching Frequency: 1.5MHz
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MPQ4485GU-AEC1-P has a total of 20 pins. The pin configuration is as follows:

1. VIN: Input Voltage
2. EN: Enable Pin
3. FB: Feedback Pin
4. GND: Ground
5. SW: Switch Node
6. PGND: Power Ground
7. VCC: Supply Voltage
8. SS: Soft-Start Pin
9. AGND: Analog Ground
10. COMP: Compensation Pin
11. BST: Bootstrap Pin
12. LX: Inductor Connection
13. NC: No Connect
14. NC: No Connect
15. NC: No Connect
16. NC: No Connect
17. NC: No Connect
18. NC: No Connect
19. NC: No Connect
20. NC: No Connect

Functional Features

• High Efficiency: The MPQ4485GU-AEC1-P offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: It consumes low power during operation, making it suitable for battery-powered devices.
• Wide Input Voltage Range: The IC can accept input voltages ranging from 2.7V to 5.5V, providing flexibility in various applications.
• Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to the input voltage (VIN), allowing customization for different requirements.
• Overcurrent Protection: The IC incorporates overcurrent protection to safeguard the circuit and connected devices.

Advantages and Disadvantages

Advantages

• High efficiency power conversion
• Low power consumption
• Wide input voltage range
• Adjustable output voltage
• Overcurrent protection

Disadvantages

• Limited maximum output current (3A)

Working Principles

The MPQ4485GU-AEC1-P is a voltage regulator that utilizes a switching converter topology. It operates by converting the input voltage to a regulated output voltage using high-frequency switching. The internal control circuitry adjusts the duty cycle of the switching transistor to maintain the desired output voltage. This switching action reduces power dissipation and increases overall efficiency.

Detailed Application Field Plans

The MPQ4485GU-AEC1-P is commonly used in various applications, including:

1. Portable Electronic Devices: It is suitable for powering smartphones, tablets, portable media players, and other battery-powered devices.
2. IoT Devices: The IC can be used in Internet of Things (IoT) devices such as smart home sensors, wearable devices, and wireless communication modules.
3. Industrial Equipment: It finds application in industrial equipment like automation systems, motor drives, and control circuits.
4. Automotive Electronics: The IC can be utilized in automotive electronics, including infotainment systems, lighting controls, and power management modules.

Detailed and Complete Alternative Models

1. MPQ4486GU-AEC1-P: Similar to MPQ4485GU-AEC1-P but with higher maximum output current (5A).
2. MPQ4484GU-AEC1-P: Similar to MPQ4485GU-AEC1-P but with lower maximum output current (2A).
3. MPQ4487GU-AEC1-P: Similar to MPQ4485GU-AEC1-P but with additional features such as adjustable soft-start and thermal shutdown.

(Note: The above alternative models are for illustrative purposes only and may not represent the actual available alternatives in the market.)

This entry provides an overview of the MPQ4485GU-AEC1-P, including its product category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.