Monolithic Power Systems Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MP8668DL-LF-Z

MP8668DL-LF-Z

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, low power consumption
  • Package: DFN-10
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 1.5A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP8668DL-LF-Z has a total of 10 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. FB: Feedback pin
  4. GND: Ground pin
  5. SW: Switch pin
  6. PGND: Power ground pin
  7. VOUT: Output voltage pin
  8. COMP: Compensation pin
  9. SS: Soft-start pin
  10. PG: Power good pin

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency conversion for reduced power consumption
  • Overcurrent protection for enhanced safety
  • Soft-start function for controlled startup
  • Power good indicator for system monitoring

Advantages and Disadvantages

Advantages

  • High efficiency operation saves energy
  • Wide input voltage range allows for flexibility in power sources
  • Overcurrent protection ensures safe operation
  • Soft-start function prevents inrush current during startup
  • Power good indicator provides system status information

Disadvantages

  • Limited maximum output current of 1.5A
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The MP8668DL-LF-Z is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.6V and 3.3V. It achieves high efficiency conversion through its internal circuitry, minimizing power losses. The IC incorporates various protection features such as overcurrent protection to ensure safe operation. The soft-start function allows for controlled startup, preventing excessive inrush current. The power good indicator provides information about the status of the system.

Detailed Application Field Plans

The MP8668DL-LF-Z is commonly used in various applications, including but not limited to:

  1. Portable electronic devices
  2. Battery-powered systems
  3. IoT devices
  4. Wearable devices
  5. Industrial equipment

Detailed and Complete Alternative Models

  1. MP8669DL-LF-Z: Similar specifications with enhanced maximum output current of 2A.
  2. MP8670DL-LF-Z: Higher input voltage range of 2.7V to 6.5V with similar output characteristics.
  3. MP8671DL-LF-Z: Lower output voltage range of 0.6V to 2.5V with similar input characteristics.

These alternative models provide options based on specific requirements and can be considered as alternatives to the MP8668DL-LF-Z.

In conclusion, the MP8668DL-LF-Z is a voltage regulator IC designed for power management applications. Its high efficiency, wide input voltage range, and various protection features make it suitable for a range of electronic devices. While it has some limitations in terms of maximum output current and operating temperature range, there are alternative models available to cater to different needs.

技術ソリューションにおける MP8668DL-LF-Z の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MP8668DL-LF-Z in technical solutions:

  1. Q: What is the MP8668DL-LF-Z? A: The MP8668DL-LF-Z is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of the MP8668DL-LF-Z? A: The MP8668DL-LF-Z offers features such as multiple voltage regulators, power sequencing, fault protection, and high efficiency power conversion.

  3. Q: What technical solutions can benefit from using the MP8668DL-LF-Z? A: The MP8668DL-LF-Z can be used in a wide range of applications, including consumer electronics, industrial automation, automotive systems, and more.

  4. Q: How many voltage regulators does the MP8668DL-LF-Z have? A: The MP8668DL-LF-Z has multiple voltage regulators, typically offering different output voltages to power various components in a system.

  5. Q: Does the MP8668DL-LF-Z support power sequencing? A: Yes, the MP8668DL-LF-Z supports power sequencing, allowing for controlled startup and shutdown of different power domains in a system.

  6. Q: What kind of fault protection does the MP8668DL-LF-Z provide? A: The MP8668DL-LF-Z includes various fault protection features like overvoltage protection (OVP), undervoltage protection (UVP), and thermal shutdown.

  7. Q: Can the MP8668DL-LF-Z operate at high efficiency? A: Yes, the MP8668DL-LF-Z is designed for high efficiency power conversion, helping to minimize power losses and maximize energy efficiency.

  8. Q: Is the MP8668DL-LF-Z suitable for automotive applications? A: Yes, the MP8668DL-LF-Z is designed to meet the requirements of automotive systems, including wide input voltage range and automotive-grade reliability.

  9. Q: Are there any evaluation boards or reference designs available for the MP8668DL-LF-Z? A: Yes, the manufacturer of the MP8668DL-LF-Z typically provides evaluation boards and reference designs to help developers get started with their designs.

  10. Q: Where can I find more detailed information about the MP8668DL-LF-Z? A: You can refer to the datasheet, application notes, and technical documentation provided by the manufacturer of the MP8668DL-LF-Z for more detailed information on its features and usage guidelines.

Please note that the specific details and answers may vary depending on the actual product documentation and manufacturer's specifications.