Monolithic Power Systems Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MP62551DGT-LF-P
詳細を表示 DataSheets

MP62551DGT-LF-P

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: DFN-8 (Dual Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP62551DGT-LF-P has a total of 8 pins arranged as follows:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. FB: Feedback pin
  4. GND: Ground pin
  5. SW: Switch pin
  6. PG: Power Good pin
  7. SS: Soft Start pin
  8. VOUT: Output voltage pin

Functional Features

  • High efficiency power conversion
  • Low power consumption in standby mode
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indicator
  • Soft start for smooth power-up

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power loss - Wide input voltage range allows for versatile applications - Compact package size saves board space - Power good indicator provides system status information

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The MP62551DGT-LF-P is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.6V and 3.6V. It achieves high efficiency by utilizing a synchronous buck converter topology. The enable pin (EN) controls the operation of the regulator, while the feedback pin (FB) provides a voltage reference for regulation. The soft start pin (SS) allows for a gradual increase in output voltage during startup, reducing stress on the system.

Detailed Application Field Plans

The MP62551DGT-LF-P is commonly used in various applications, including but not limited to:

  1. Portable electronic devices: Provides power management for smartphones, tablets, and portable media players.
  2. IoT devices: Suitable for low-power sensors, wearables, and connected devices.
  3. Battery-powered systems: Enables efficient power conversion in battery-operated devices such as wireless headphones and handheld gaming consoles.
  4. Industrial equipment: Used in control systems, motor drives, and instrumentation devices.
  5. Automotive electronics: Supports power management in automotive infotainment systems, lighting modules, and advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

  1. MP62550DGT-LF-P: Similar specifications and features, but with a different package (SOT-23-6).
  2. MP62552DGT-LF-P: Higher maximum output current (2A), suitable for more demanding applications.
  3. MP62553DGT-LF-P: Lower dropout voltage (100mV), ideal for low input voltage scenarios.

These alternative models provide flexibility in choosing the most suitable voltage regulator based on specific application requirements.

Word count: 439 words

技術ソリューションにおける MP62551DGT-LF-P の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MP62551DGT-LF-P in technical solutions:

  1. Q: What is the MP62551DGT-LF-P? A: The MP62551DGT-LF-P is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of the MP62551DGT-LF-P? A: Some key features of this PMIC include multiple voltage regulators, power sequencing, fault protection, and low power consumption.

  3. Q: What technical solutions can benefit from using the MP62551DGT-LF-P? A: The MP62551DGT-LF-P can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, and more.

  4. Q: How many voltage regulators does the MP62551DGT-LF-P have? A: This PMIC has multiple voltage regulators, typically including buck converters, boost converters, and LDOs (low-dropout regulators).

  5. Q: Can the MP62551DGT-LF-P handle high current loads? A: Yes, this PMIC is designed to handle high current loads, making it suitable for power-hungry devices or systems.

  6. Q: Does the MP62551DGT-LF-P provide any fault protection mechanisms? A: Yes, this PMIC includes various fault protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: Is the MP62551DGT-LF-P compatible with battery-powered applications? A: Yes, this PMIC is often used in battery-powered applications due to its efficient power management capabilities.

  8. Q: Can the MP62551DGT-LF-P be controlled and monitored remotely? A: Yes, this PMIC typically supports communication interfaces like I2C or SPI, allowing for remote control and monitoring of its functions.

  9. Q: What is the typical operating voltage range of the MP62551DGT-LF-P? A: The MP62551DGT-LF-P can typically operate within a wide voltage range, such as 2.7V to 5.5V, depending on the specific model.

  10. Q: Where can I find more detailed information about the MP62551DGT-LF-P? A: You can refer to the datasheet provided by the manufacturer or visit their official website for more detailed technical information about this PMIC.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.