Monolithic Power Systems Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MP3378GY
詳細を表示 DataSheets

MP3378GY

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, versatile
  • Package: 16-pin QFN package
  • Essence: Power management IC for various applications
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Maximum Output Current: 3A
  • Switching Frequency: 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP3378GY features a 16-pin QFN package with the following pin configuration:

  1. VIN: Input voltage
  2. EN: Enable pin
  3. FB: Feedback pin
  4. GND: Ground
  5. SW: Switch node
  6. LX: Inductor connection
  7. PGND: Power ground
  8. VOUT: Output voltage
  9. SS/TR: Soft-start/tracking pin
  10. COMP: Compensation pin
  11. BST: Bootstrap capacitor connection
  12. AGND: Analog ground
  13. PG: Power good indicator
  14. ILIM: Current limit setting
  15. NC: No connection
  16. VREF: Reference voltage output

Functional Features

  • High efficiency power conversion
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start and tracking capability
  • Power good indicator

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size allows for space-saving designs - Versatile functionality suits various applications - Overcurrent and thermal protection ensure system safety - Soft-start and tracking features improve system reliability

Disadvantages: - Limited output current may not be suitable for high-power applications - Requires external components for operation

Working Principles

The MP3378GY is a power management IC that utilizes a switching regulator to efficiently convert input voltage to a regulated output voltage. It employs a pulse-width modulation (PWM) control scheme to regulate the output voltage based on feedback from the FB pin. The IC incorporates various protection mechanisms, such as overcurrent and thermal shutdown, to safeguard the system.

Detailed Application Field Plans

The MP3378GY can be used in a wide range of applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Industrial automation - LED lighting - Consumer electronics

Detailed and Complete Alternative Models

  1. MP3379GY: Similar specifications and features, but with higher output current capability (up to 5A).
  2. MP3380GY: Enhanced version with additional features like adjustable frequency and synchronization capability.
  3. MP3367GY: Lower cost alternative with slightly reduced efficiency and output current (up to 2A).

These alternative models provide flexibility in choosing the most suitable power management IC based on specific application requirements.

Word count: 313 words

技術ソリューションにおける MP3378GY の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MP3378GY in technical solutions:

  1. Q: What is MP3378GY? A: MP3378GY is a specific model or part number of a component used in technical solutions, such as power management or LED lighting applications.

  2. Q: What is the input voltage range of MP3378GY? A: The input voltage range of MP3378GY typically ranges from 4.5V to 28V.

  3. Q: What is the output current capability of MP3378GY? A: MP3378GY can provide an output current capability of up to 3A.

  4. Q: Can MP3378GY be used for dimming LED lights? A: Yes, MP3378GY supports PWM dimming control for LED lights.

  5. Q: Does MP3378GY have over-temperature protection? A: Yes, MP3378GY incorporates over-temperature protection to prevent damage due to excessive heat.

  6. Q: Can MP3378GY operate in a wide temperature range? A: Yes, MP3378GY is designed to operate reliably in a wide temperature range, typically from -40°C to 85°C.

  7. Q: Is MP3378GY compatible with both buck and boost configurations? A: No, MP3378GY is specifically designed for buck (step-down) configurations only.

  8. Q: What is the efficiency of MP3378GY? A: MP3378GY has a high efficiency rating, typically above 90%, which helps minimize power losses.

  9. Q: Can MP3378GY be used in battery-powered applications? A: Yes, MP3378GY is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  10. Q: Does MP3378GY require any external components for operation? A: Yes, MP3378GY may require a few external components such as input/output capacitors and inductors for proper operation.

Please note that the specific details and answers may vary depending on the manufacturer's specifications and application requirements.