Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SG3845DM
詳細を表示 DataSheets

SG3845DM

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Mode PWM Controller
  • Characteristics: High-performance, versatile, and reliable
  • Package: Dual-In-Line Package (DIP)
  • Essence: Regulates and controls the output voltage of power supplies
  • Packaging/Quantity: Available in reels of 1000 units

Specifications

  • Input Voltage Range: 8V to 35V
  • Output Voltage Range: 5V to 30V
  • Operating Temperature Range: -40°C to +85°C
  • Frequency Range: 50kHz to 500kHz
  • Maximum Duty Cycle: 50%
  • Output Current: Up to 500mA

Detailed Pin Configuration

The SG3845DM IC has a total of 16 pins. The pin configuration is as follows:

  1. COMP: Compensation Pin
  2. RT/CT: Timing Resistor/Capacitor Connection Pin
  3. CT: Timing Capacitor Connection Pin
  4. GND: Ground Pin
  5. VREF: Reference Voltage Output Pin
  6. VCC: Power Supply Input Pin
  7. SYNC: Synchronization Input Pin
  8. OSC: Oscillator Frequency Setting Pin
  9. INV: Inverting Input Pin
  10. CS: Current Sense Input Pin
  11. SS/TR: Soft Start/Shutdown Pin
  12. OUT: Output Pin
  13. FB: Feedback Input Pin
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection

Functional Features

  • Voltage Mode Control: Provides precise regulation of output voltage
  • Current Limiting: Protects against excessive load current
  • Soft Start: Gradually ramps up the output voltage during startup
  • Shutdown Function: Allows for easy power on/off control
  • Synchronization: Enables synchronization with an external clock signal

Advantages and Disadvantages

Advantages

  • High-performance voltage regulation
  • Wide input and output voltage range
  • Versatile and reliable operation
  • Compact DIP package for easy integration
  • Current limiting for enhanced protection

Disadvantages

  • Limited maximum duty cycle (50%)
  • Requires external timing components (resistor and capacitor)
  • Not suitable for high-power applications

Working Principles

The SG3845DM operates based on the voltage mode control technique. It compares the feedback voltage from the output with a reference voltage to generate an error signal. This error signal is then amplified and used to control the duty cycle of the PWM (Pulse Width Modulation) signal. By adjusting the duty cycle, the IC regulates the output voltage according to the desired setpoint.

Detailed Application Field Plans

The SG3845DM is commonly used in various applications, including:

  1. Switching Power Supplies
  2. DC-DC Converters
  3. Battery Chargers
  4. LED Drivers
  5. Industrial Control Systems

Detailed and Complete Alternative Models

  1. SG3525: Similar voltage mode PWM controller with higher current handling capability.
  2. TL494: PWM controller with integrated error amplifier and shutdown function.
  3. UC3842: Current mode PWM controller with adjustable frequency and soft start feature.

These alternative models offer similar functionality and can be considered as substitutes for the SG3845DM depending on specific requirements.

Word count: 409 words

技術ソリューションにおける SG3845DM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of SG3845DM in technical solutions:

  1. Q: What is SG3845DM?
    A: SG3845DM is a pulse width modulation (PWM) controller IC used in power supply applications.

  2. Q: What is the operating voltage range of SG3845DM?
    A: The operating voltage range of SG3845DM is typically between 8V and 35V.

  3. Q: What is the maximum frequency at which SG3845DM can operate?
    A: SG3845DM can operate at a maximum frequency of around 500kHz.

  4. Q: Can SG3845DM be used in both buck and boost converter designs?
    A: Yes, SG3845DM can be used in both buck and boost converter designs.

  5. Q: Does SG3845DM have built-in protection features?
    A: Yes, SG3845DM has built-in protection features such as overcurrent protection and thermal shutdown.

  6. Q: How many outputs does SG3845DM support?
    A: SG3845DM supports a single output.

  7. Q: What is the typical efficiency of a power supply using SG3845DM?
    A: The efficiency of a power supply using SG3845DM depends on various factors but can typically range from 80% to 95%.

  8. Q: Can SG3845DM be used in high-power applications?
    A: Yes, SG3845DM can be used in high-power applications with appropriate external components.

  9. Q: Is SG3845DM suitable for battery charging applications?
    A: Yes, SG3845DM can be used in battery charging applications by controlling the charging current and voltage.

  10. Q: Are there any application notes or reference designs available for SG3845DM?
    A: Yes, the manufacturer of SG3845DM provides application notes and reference designs that can help in implementing the IC in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and guidance.