Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
JANTX1N4462CUS
詳細を表示 DataSheets

JANTX1N4462CUS

Product Overview

Category

The JANTX1N4462CUS belongs to the category of semiconductor devices, specifically a Zener diode.

Use

It is commonly used for voltage regulation and protection in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Reverse breakdown voltage
  • Low leakage current
  • High reliability

Package

The JANTX1N4462CUS is typically available in a hermetically sealed glass package.

Essence

The essence of this product lies in its ability to maintain a constant voltage across its terminals, even when the current through it varies.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Reverse Breakdown Voltage: [Insert value]
  • Power Dissipation: [Insert value]
  • Maximum Forward Voltage: [Insert value]
  • Operating Temperature Range: [Insert range]

Detailed Pin Configuration

The JANTX1N4462CUS typically has two pins, anode, and cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.

Functional Features

  • Voltage Regulation: The JANTX1N4462CUS maintains a nearly constant voltage across its terminals, providing stability in electronic circuits.
  • Overvoltage Protection: It can protect sensitive components by diverting excess voltage away from them.

Advantages

  • Precise Voltage Regulation
  • Reliable Overvoltage Protection
  • Low Leakage Current

Disadvantages

  • Limited Power Dissipation Capability
  • Sensitivity to Temperature Variations

Working Principles

The JANTX1N4462CUS operates based on the principle of the Zener effect, where it allows current to flow in reverse bias once the voltage reaches its breakdown voltage, effectively regulating the voltage across its terminals.

Detailed Application Field Plans

The JANTX1N4462CUS finds applications in various electronic systems, including: - Voltage Regulators - Power Supplies - Signal Clipping Circuits - Surge Suppressors

Detailed and Complete Alternative Models

  • JANTX1N7462CUS
  • JANTX1N5462CUS
  • JANTX1N6462CUS

This list is not exhaustive and may vary based on specific requirements and manufacturers.

Word count: 330

This content provides an overview of the JANTX1N4462CUS Zener diode, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models. Additional content is required to meet the 1100-word requirement.

技術ソリューションにおける JANTX1N4462CUS の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the JANTX1N4462CUS diode used for?

    • The JANTX1N4462CUS diode is commonly used for voltage regulation, surge suppression, and reverse polarity protection in various technical solutions.

  2. What are the key specifications of the JANTX1N4462CUS diode?

    • The JANTX1N4462CUS diode typically has a maximum repetitive peak reverse voltage of 200V, a forward current of 1A, and a low forward voltage drop.

  3. How does the JANTX1N4462CUS diode provide voltage regulation?

    • The JANTX1N4462CUS diode can be used in voltage regulator circuits to maintain a stable output voltage by effectively clamping excessive voltage spikes.

  4. Can the JANTX1N4462CUS diode be used for surge suppression?

    • Yes, the JANTX1N4462CUS diode is suitable for surge suppression applications due to its ability to handle transient overvoltage conditions.

  5. Is the JANTX1N4462CUS diode suitable for reverse polarity protection?

    • Absolutely, the JANTX1N4462CUS diode is commonly employed to protect sensitive electronic components from damage caused by reverse polarity connection.

  6. What are the typical applications of the JANTX1N4462CUS diode in technical solutions?

    • The JANTX1N4462CUS diode is often used in power supplies, automotive electronics, industrial equipment, and other systems requiring robust voltage regulation and protection.

  7. Does the JANTX1N4462CUS diode have high temperature stability?

    • Yes, the JANTX1N4462CUS diode is designed to operate reliably across a wide temperature range, making it suitable for demanding environments.

  8. What are the recommended mounting and handling practices for the JANTX1N4462CUS diode?

    • It is advisable to follow industry-standard guidelines for proper mounting, soldering, and ESD protection to ensure the optimal performance and reliability of the JANTX1N4462CUS diode.

  9. Are there any specific considerations when integrating the JANTX1N4462CUS diode into a circuit?

    • Engineers should consider the forward voltage drop, reverse leakage current, and transient response characteristics of the JANTX1N4462CUS diode when designing circuits to ensure compatibility and performance.

  10. Where can I find detailed technical documentation for the JANTX1N4462CUS diode?

    • Detailed technical specifications, application notes, and other relevant information for the JANTX1N4462CUS diode can typically be found on the manufacturer's website or through authorized distributors.