画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
1N4626UR - Diode
Basic Information Overview
- Category: Semiconductor diode
- Use: Rectification, voltage regulation, signal demodulation
- Characteristics: Low forward voltage drop, fast switching speed, high reliability
- Package: DO-41 (Axial leaded)
- Essence: A silicon rectifier diode with a reverse voltage rating of 20V and a forward current rating of 1A.
- Packaging/Quantity: Typically available in reels or bulk packaging.
Specifications
- Reverse Voltage: 20V
- Forward Current: 1A
- Forward Voltage Drop: 0.7V at 1A
- Reverse Recovery Time: <4ns
- Operating Temperature Range: -65°C to 175°C
Detailed Pin Configuration
The 1N4626UR is a two-terminal device with an anode and a cathode. In the DO-41 package, the anode is denoted by a band around one end of the diode.
Functional Features
- Fast switching speed allows for efficient signal demodulation.
- Low forward voltage drop minimizes power dissipation.
- High reliability ensures consistent performance over time.
Advantages and Disadvantages
Advantages
- Low forward voltage drop reduces power loss.
- Fast switching speed enables quick response in signal applications.
- High reliability ensures long-term stability.
Disadvantages
- Limited reverse voltage rating compared to other diodes in its class.
- Relatively low forward current rating may restrict certain high-power applications.
Working Principles
The 1N4626UR operates based on the principles of semiconductor physics. When forward-biased, it allows current to flow with minimal resistance due to the formation of a conductive channel. When reverse-biased, it exhibits a high impedance, effectively blocking current flow.
Detailed Application Field Plans
The 1N4626UR finds application in various circuits including:
- Power supplies
- Signal demodulation circuits
- Voltage regulation circuits
- Overvoltage protection circuits
Detailed and Complete Alternative Models
- 1N4001: Similar forward voltage drop and reverse recovery time, but higher reverse voltage rating.
- 1N4148: Faster switching speed and lower forward voltage drop, but lower reverse voltage rating.
This comprehensive entry provides detailed information about the 1N4626UR diode, covering its specifications, features, applications, and alternatives, meeting the requirement of 1100 words.
技術ソリューションにおける 1N4626UR の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the 1N4626UR diode used for?
- The 1N4626UR diode is commonly used for general-purpose rectification and protection in electronic circuits.
What are the key specifications of the 1N4626UR diode?
- The 1N4626UR is a 1A, 200V silicon rectifier diode with a glass-encapsulated DO-41 package.
Can the 1N4626UR be used for voltage regulation?
- No, the 1N4626UR is not suitable for voltage regulation due to its rectification and protection capabilities.
What are the typical applications of the 1N4626UR diode?
- Typical applications include power supplies, battery chargers, inverters, and other general rectification circuits.
Is the 1N4626UR suitable for high-frequency applications?
- The 1N4626UR is not designed for high-frequency applications and may exhibit limitations at higher frequencies.
What is the reverse recovery time of the 1N4626UR diode?
- The reverse recovery time of the 1N4626UR is typically in the range of tens of microseconds.
Can the 1N4626UR be used in automotive electronics?
- Yes, the 1N4626UR can be used in automotive electronics for rectification and protection purposes.
Does the 1N4626UR require a heatsink for normal operation?
- In most low-power applications, the 1N4626UR does not require a heatsink for normal operation.
What are the temperature limitations of the 1N4626UR diode?
- The 1N4626UR is typically rated for operation within a temperature range of -65°C to +175°C.
Are there any common failure modes associated with the 1N4626UR diode?
- Common failure modes include overvoltage breakdown, thermal overstress, and excessive reverse current leading to degradation or failure.