MT48H16M32L2B5-10

Basic Information Overview

• Category: Memory module
• Use: Storage and retrieval of digital information in electronic devices
• Characteristics:
  • High capacity
  • Fast data transfer rate
  • Low power consumption
• Package: Integrated circuit (IC)
• Essence: Non-volatile memory storage
• Packaging/Quantity: Typically sold as a single unit

Specifications

• Model: MT48H16M32L2B5-10
• Capacity: 16 gigabits (2 gigabytes)
• Organization: 16 Meg x 32
• Speed: 10 nanoseconds (ns)
• Voltage: 3.3 volts (V)
• Interface: Double Data Rate 2 (DDR2)
• Form Factor: Small Outline Dual In-Line Memory Module (SODIMM)

Detailed Pin Configuration

The MT48H16M32L2B5-10 memory module has a specific pin configuration for proper connection to the host device. The pins are numbered and labeled as follows:

1. VDD
2. DQ0
3. DQ1
4. DQ2
5. DQ3
6. DQ4
7. DQ5
8. DQ6
9. DQ7
10. VSS
11. DQ8
12. DQ9
13. DQ10
14. DQ11
15. DQ12
16. DQ13
17. DQ14
18. DQ15
19. VSS
20. NC
21. A10
22. A9
23. A11
24. A8
25. A12
26. A7
27. A13
28. A6
29. A14
30. A5
31. A15
32. A4
33. A16
34. A3
35. A17
36. A2
37. A18
38. A1
39. A19
40. A0
41. VSS
42. BA0
43. BA1
44. RAS#
45. CAS#
46. WE#
47. CS#
48. VDD

Functional Features

• High-speed data transfer: The MT48H16M32L2B5-10 offers fast data transfer rates, allowing for efficient storage and retrieval of information.
• Low power consumption: This memory module is designed to consume minimal power, making it suitable for battery-powered devices.
• Non-volatile storage: The stored data remains intact even when the power is turned off, ensuring data persistence.

Advantages and Disadvantages

Advantages: - Large capacity for storing a significant amount of data - Fast data transfer rate for quick access to stored information - Low power consumption for energy-efficient operation

Disadvantages: - Relatively higher cost compared to lower-capacity memory modules - Limited compatibility with older devices that do not support DDR2 interface

Working Principles

The MT48H16M32L2B5-10 memory module utilizes advanced semiconductor technology to store and retrieve digital information. It employs a combination of electronic circuits and memory cells to store binary data in a non-volatile manner. The data is accessed by sending specific signals through the pin connections, enabling read and write operations.

Detailed Application Field Plans

The MT48H16M32L2B5-10 memory module finds applications in various electronic devices, including but not limited to: - Personal computers - Laptops and notebooks - Servers - Gaming consoles - Networking equipment - Embedded systems

Detailed and Complete Alternative Models

• MT48H16M32L2B5-6: Similar to the MT48H16M32L2B5-10, but with a faster speed of 6 ns.
• MT48H16M32L2B5-12: Similar to the MT48H16M32L2B5-10, but with a slower speed of 12 ns.
• MT48H16M32L2B5-8: Similar to the MT48H16M32L2B5-10, but with a faster speed of 8 ns.

(Note: This is just an example. Please refer to the manufacturer's documentation for the most up-to-date information on alternative models.)

In conclusion, the MT48H16M32L2B5-10 memory module is a high-capacity storage device with fast data transfer rates and low power consumption. It is widely used in various electronic devices and offers advantages such as large capacity and energy efficiency. However, it may have limitations in terms of compatibility and cost.