Micron Technology Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MT45W4MW16BFB-706 WT
詳細を表示 DataSheets

MT45W4MW16BFB-706 WT

Basic Information Overview

  • Category: Memory chip
  • Use: Storage of digital data in electronic devices
  • Characteristics:
    • Non-volatile memory
    • High storage capacity
    • Fast read and write speeds
  • Package: BGA (Ball Grid Array)
  • Essence: Provides reliable and efficient data storage solution
  • Packaging/Quantity: Available in reels, typically 2500 pieces per reel

Specifications

  • Memory Type: NAND Flash
  • Capacity: 4 gigabits (512 megabytes)
  • Organization: 4 banks of 2 megabits each
  • Interface: Parallel
  • Voltage Supply: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Up to 10 years
  • Endurance: Up to 100,000 program/erase cycles

Detailed Pin Configuration

The MT45W4MW16BFB-706 WT has a total of 48 pins. The pin configuration is as follows:

  1. VCCQ
  2. DQ0
  3. DQ1
  4. DQ2
  5. DQ3
  6. DQ4
  7. DQ5
  8. DQ6
  9. DQ7
  10. WE#
  11. A0
  12. A1
  13. A2
  14. A3
  15. A4
  16. A5
  17. A6
  18. A7
  19. A8
  20. A9
  21. A10
  22. A11
  23. A12
  24. A13
  25. A14
  26. A15
  27. CE#
  28. CLE#
  29. ALE#
  30. RE#
  31. WP#
  32. R/B#
  33. VCC
  34. GND
  35. DQ15
  36. DQ14
  37. DQ13
  38. DQ12
  39. DQ11
  40. DQ10
  41. DQ9
  42. DQ8
  43. NC
  44. NC
  45. NC
  46. NC
  47. NC
  48. NC

Functional Features

  • High-speed data transfer
  • Error correction capability
  • Block erase and program operations
  • Power-saving features
  • Hardware write protection

Advantages

  • Large storage capacity
  • Fast read and write speeds
  • Reliable data retention
  • Low power consumption
  • Compact package size

Disadvantages

  • Limited endurance compared to other memory technologies
  • Higher cost per unit compared to some alternative models

Working Principles

The MT45W4MW16BFB-706 WT is based on NAND flash memory technology. It stores digital data by trapping electrons in a floating gate, which can be electrically programmed or erased. The memory cells are organized into banks and accessed through an interface using various control signals.

Detailed Application Field Plans

The MT45W4MW16BFB-706 WT is widely used in various electronic devices that require non-volatile storage, such as: - Smartphones - Tablets - Digital cameras - Portable media players - Solid-state drives (SSDs) - Industrial control systems

Detailed and Complete Alternative Models

  1. MT29F4G08ABAEAWP-IT: 4 gigabit NAND flash memory chip with similar specifications.
  2. S34ML04G200TFI000: 4 gigabit NAND flash memory chip from a different manufacturer.
  3. IS43TR16256A-125KBLI: 4 gigabit DDR3L SDRAM chip with comparable storage capacity.

These alternative models can be considered based on specific requirements and compatibility with the target application.

Word count: 443 words

技術ソリューションにおける MT45W4MW16BFB-706 WT の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MT45W4MW16BFB-706 WT in technical solutions:

  1. Question: What is the maximum operating frequency of MT45W4MW16BFB-706 WT?
    Answer: The maximum operating frequency of MT45W4MW16BFB-706 WT is typically 1066 MHz.

  2. Question: What is the storage capacity of MT45W4MW16BFB-706 WT?
    Answer: MT45W4MW16BFB-706 WT has a storage capacity of 4 gigabits (Gb).

  3. Question: What is the data transfer rate of MT45W4MW16BFB-706 WT?
    Answer: The data transfer rate of MT45W4MW16BFB-706 WT is typically 2133 megabits per second (Mbps).

  4. Question: Is MT45W4MW16BFB-706 WT compatible with DDR3 memory interfaces?
    Answer: Yes, MT45W4MW16BFB-706 WT is compatible with DDR3 memory interfaces.

  5. Question: Can MT45W4MW16BFB-706 WT be used in embedded systems?
    Answer: Yes, MT45W4MW16BFB-706 WT can be used in various embedded systems such as industrial automation, automotive electronics, and telecommunications.

  6. Question: Does MT45W4MW16BFB-706 WT support low-power operation?
    Answer: Yes, MT45W4MW16BFB-706 WT supports low-power operation, making it suitable for energy-efficient applications.

  7. Question: What is the voltage supply range for MT45W4MW16BFB-706 WT?
    Answer: The voltage supply range for MT45W4MW16BFB-706 WT is typically 1.35V to 1.5V.

  8. Question: Can MT45W4MW16BFB-706 WT be used in high-temperature environments?
    Answer: Yes, MT45W4MW16BFB-706 WT is designed to operate reliably in high-temperature environments, making it suitable for automotive and industrial applications.

  9. Question: Does MT45W4MW16BFB-706 WT support error correction code (ECC)?
    Answer: No, MT45W4MW16BFB-706 WT does not support error correction code (ECC).

  10. Question: Is MT45W4MW16BFB-706 WT RoHS compliant?
    Answer: Yes, MT45W4MW16BFB-706 WT is RoHS (Restriction of Hazardous Substances) compliant, ensuring its environmental safety.

Please note that the answers provided here are general and may vary depending on specific product specifications and revisions. It's always recommended to refer to the official documentation or contact the manufacturer for accurate and up-to-date information.