Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SY10EPT28LKG
詳細を表示 DataSheets

SY10EPT28LKG

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal transmission and processing in high-speed digital systems
  • Characteristics: High-speed operation, low power consumption, small package size
  • Package: LQFP (Low-profile Quad Flat Package)
  • Essence: Transceiver IC for high-speed data communication
  • Packaging/Quantity: Typically sold in reels of 250 or 1000 units

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 2.5 Gbps
  • Number of Pins: 28
  • Input/Output Logic Levels: LVPECL (Low-Voltage Positive Emitter-Coupled Logic)

Detailed Pin Configuration

  1. VCC
  2. GND
  3. CLKIN
  4. CLKOUT
  5. /OE (Output Enable)
  6. /RST (Reset)
  7. NC (No Connection)
  8. NC
  9. NC
  10. NC
  11. NC
  12. NC
  13. NC
  14. NC
  15. NC
  16. NC
  17. NC
  18. NC
  19. NC
  20. NC
  21. NC
  22. NC
  23. NC
  24. NC
  25. NC
  26. NC
  27. NC
  28. NC

Functional Features

  • High-speed differential signal transmission
  • Built-in clock recovery circuitry
  • Low jitter and skew characteristics
  • On-chip termination resistors for impedance matching
  • Output enable and reset functions for control flexibility

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data transmission
  • Low power consumption helps reduce overall system energy usage
  • Small package size saves board space in compact designs

Disadvantages

  • Limited pin count may restrict the number of interfaces that can be supported
  • LVPECL logic levels may require level shifting for compatibility with other logic families

Working Principles

SY10EPT28LKG is a transceiver IC designed to transmit and receive high-speed digital signals. It operates on a 3.3V supply voltage and uses LVPECL logic levels for signal communication. The IC incorporates clock recovery circuitry, which allows it to extract the clock signal from the incoming data stream. This clock signal is then used to synchronize the data transmission. On-chip termination resistors ensure proper impedance matching for optimal signal integrity.

Detailed Application Field Plans

  • High-speed data communication systems
  • Fiber optic communication equipment
  • Networking devices
  • Data storage systems
  • Test and measurement instruments

Detailed and Complete Alternative Models

  1. SY100ELT23LKG
  2. SY100ELT22LKG
  3. SY100ELT21LKG
  4. SY100ELT20LKG
  5. SY100ELT19LKG
  6. SY100ELT18LKG
  7. SY100ELT17LKG
  8. SY100ELT16LKG
  9. SY100ELT15LKG
  10. SY100ELT14LKG

These alternative models are part of the same series and offer similar functionality with varying specifications and pin configurations.

Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.

技術ソリューションにおける SY10EPT28LKG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of SY10EPT28LKG in technical solutions:

1. What is SY10EPT28LKG? SY10EPT28LKG is a high-speed differential receiver designed for use in various technical applications.

2. What is the operating voltage range of SY10EPT28LKG? The operating voltage range of SY10EPT28LKG is typically between -4.2V and -5.7V.

3. What is the maximum data rate supported by SY10EPT28LKG? SY10EPT28LKG can support data rates up to 3.8 Gbps.

4. Can SY10EPT28LKG be used in both single-ended and differential signaling applications? No, SY10EPT28LKG is specifically designed for differential signaling applications.

5. What is the input voltage swing of SY10EPT28LKG? The input voltage swing of SY10EPT28LKG is typically ±200 mV.

6. Does SY10EPT28LKG have built-in termination resistors? No, SY10EPT28LKG does not have built-in termination resistors. External termination resistors may be required depending on the application.

7. What is the output voltage swing of SY10EPT28LKG? The output voltage swing of SY10EPT28LKG is typically ±800 mV.

8. Is SY10EPT28LKG compatible with other ECL logic families? Yes, SY10EPT28LKG is compatible with other ECL logic families such as SY100EPT series.

9. Can SY10EPT28LKG be used in high-speed communication systems? Yes, SY10EPT28LKG is suitable for high-speed communication systems, especially those requiring differential signaling.

10. What are some typical applications of SY10EPT28LKG? SY10EPT28LKG can be used in various applications including data communication, clock distribution, and high-speed data acquisition systems.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of SY10EPT28LKG.