画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC2555-1YML-TR

MIC2555-1YML-TR

Product Overview

Category

MIC2555-1YML-TR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a power distribution switch in various electronic devices.

Characteristics

  • Low voltage drop
  • Overcurrent protection
  • Thermal shutdown protection
  • Fast current limiting response time

Package

MIC2555-1YML-TR is available in a miniature 10-pin MLP package.

Essence

The essence of this product lies in its ability to efficiently control and distribute power within electronic systems.

Packaging/Quantity

MIC2555-1YML-TR is typically packaged in reels, with each reel containing a specified quantity of units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Current: Up to 500mA
  • Quiescent Current: 20µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. EN (Enable)
  2. IN (Input Voltage)
  3. GND (Ground)
  4. PG (Power Good)
  5. OUT (Output Voltage)
  6. FB (Feedback)
  7. SS (Soft Start)
  8. ILIM (Current Limit)
  9. VDD (Supply Voltage)
  10. VDD (Supply Voltage)

Functional Features

  • Enable pin for controlling the power switch
  • Power good output indicating the status of the output voltage
  • Soft start feature for gradual ramp-up of the output voltage
  • Current limit pin for setting the maximum output current

Advantages and Disadvantages

Advantages

  • Low voltage drop ensures minimal power loss
  • Overcurrent and thermal shutdown protection enhance system safety
  • Fast current limiting response time protects sensitive components

Disadvantages

  • Limited output current capacity (up to 500mA)
  • Restricted input voltage range (2.7V to 5.5V)

Working Principles

MIC2555-1YML-TR operates by controlling the flow of current from the input to the output based on the enable signal. It incorporates various protection mechanisms, such as overcurrent and thermal shutdown, to safeguard the system and connected components.

Detailed Application Field Plans

MIC2555-1YML-TR finds applications in a wide range of electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to MIC2555-1YML-TR are: - TPS22917 - AP22802 - FPF2700

These models offer similar functionality and characteristics, providing flexibility in choosing the most suitable power distribution switch for specific applications.

In conclusion, MIC2555-1YML-TR is a versatile power distribution switch integrated circuit with low voltage drop, overcurrent protection, and thermal shutdown features. Its compact package and wide operating temperature range make it suitable for various electronic devices. While it has limitations in terms of output current capacity and input voltage range, there are alternative models available to meet specific requirements.

技術ソリューションにおける MIC2555-1YML-TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC2555-1YML-TR in technical solutions:

Q1: What is MIC2555-1YML-TR? A1: MIC2555-1YML-TR is a high-side load switch that provides protection and control for various applications.

Q2: What is the maximum voltage rating of MIC2555-1YML-TR? A2: The maximum voltage rating of MIC2555-1YML-TR is typically 5.5V.

Q3: What is the maximum current rating of MIC2555-1YML-TR? A3: The maximum current rating of MIC2555-1YML-TR is typically 500mA.

Q4: Can MIC2555-1YML-TR be used for power sequencing? A4: Yes, MIC2555-1YML-TR can be used for power sequencing as it has an enable pin for controlling the power supply sequence.

Q5: Is MIC2555-1YML-TR suitable for battery-powered applications? A5: Yes, MIC2555-1YML-TR is suitable for battery-powered applications as it has low quiescent current and low shutdown current.

Q6: Does MIC2555-1YML-TR have built-in thermal protection? A6: Yes, MIC2555-1YML-TR has built-in thermal protection to prevent overheating.

Q7: Can MIC2555-1YML-TR handle short-circuit conditions? A7: Yes, MIC2555-1YML-TR can handle short-circuit conditions as it has built-in current limiting and overcurrent protection.

Q8: What is the operating temperature range of MIC2555-1YML-TR? A8: The operating temperature range of MIC2555-1YML-TR is typically -40°C to +85°C.

Q9: Can MIC2555-1YML-TR be used in automotive applications? A9: Yes, MIC2555-1YML-TR can be used in automotive applications as it meets the AEC-Q100 automotive qualification standards.

Q10: Does MIC2555-1YML-TR have ESD protection? A10: Yes, MIC2555-1YML-TR has ESD protection up to a certain level, typically exceeding ±2kV.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements. It's always recommended to refer to the official documentation for accurate information.