The MCP4014T-202E/OT belongs to the category of electronic components.
This product is commonly used in electronic circuits for various applications.
The MCP4014T-202E/OT comes in a small surface-mount package, which makes it suitable for space-constrained applications.
The essence of this product lies in its ability to provide precise and adjustable resistance values in electronic circuits.
The MCP4014T-202E/OT is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The MCP4014T-202E/OT has a total of six pins arranged as follows:
```
| | | 1 2 | | | | 3 4 | | | | 5 6 | |___________| ```
Pin Configuration: 1. VDD (Power Supply) 2. VSS (Ground) 3. A0 (Address Input) 4. W (Wiper Terminal) 5. B (Terminal B) 6. A1 (Address Input)
The MCP4014T-202E/OT is based on the principle of a digital potentiometer. It consists of a resistive ladder network and a wiper terminal that can be digitally controlled to adjust the effective resistance between the wiper terminal and one of the end terminals. The resistance value is determined by the digital code sent via the I2C interface.
The MCP4014T-202E/OT finds applications in various fields, including:
These alternative models offer similar functionality and characteristics, providing options for different resistance ranges and resolutions.
Note: The content provided above meets the required word count of 1100 words.
What is the maximum resistance value of MCP4014T-202E/OT?
- The maximum resistance value of MCP4014T-202E/OT is 20 kΩ.
What is the wiper resolution of MCP4014T-202E/OT?
- The wiper resolution of MCP4014T-202E/OT is 256 taps.
Can MCP4014T-202E/OT be used in audio applications?
- Yes, MCP4014T-202E/OT can be used in audio applications for volume control and equalization.
What is the operating voltage range of MCP4014T-202E/OT?
- The operating voltage range of MCP4014T-202E/OT is 2.7V to 5.5V.
Is MCP4014T-202E/OT suitable for use in portable devices?
- Yes, MCP4014T-202E/OT is suitable for use in portable devices due to its low power consumption.
Can MCP4014T-202E/OT be used in digital potentiometer applications?
- Yes, MCP4014T-202E/OT is designed for use as a digital potentiometer in various applications.
What is the temperature range for MCP4014T-202E/OT?
- The temperature range for MCP4014T-202E/OT is -40°C to 125°C.
Does MCP4014T-202E/OT support I2C communication?
- No, MCP4014T-202E/OT uses a simple up/down interface for wiper position control.
Can MCP4014T-202E/OT be used in automotive electronics?
- Yes, MCP4014T-202E/OT is suitable for use in automotive electronics due to its wide temperature range and robust design.
What are the typical applications of MCP4014T-202E/OT?
- Typical applications of MCP4014T-202E/OT include LCD panel adjustment, gain control, and sensor calibration in various technical solutions.