Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MCP25020-I/P
詳細を表示 DataSheets

MCP25020-I/P

Product Overview

Category

The MCP25020-I/P belongs to the category of Integrated Circuits (ICs).

Use

This product is primarily used for communication purposes in automotive applications.

Characteristics

  • The MCP25020-I/P is a high-speed CAN (Controller Area Network) transceiver.
  • It operates at a maximum data rate of 1 Mbps.
  • This IC supports both 5V and 3.3V supply voltages.
  • It is designed to meet the stringent requirements of automotive applications, including electromagnetic compatibility (EMC) and electrostatic discharge (ESD) protection.

Package

The MCP25020-I/P is available in a DIP (Dual Inline Package) package.

Essence

The essence of this product lies in its ability to facilitate reliable and efficient communication within automotive systems.

Packaging/Quantity

The MCP25020-I/P is typically packaged in tubes or trays, with a quantity of 25 units per tube/tray.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +125°C
  • Data Rate: Up to 1 Mbps
  • Transmitting and Receiving Buffer Size: 3 bytes
  • Standby Current: 10 µA (typical)
  • Transmitting Current: 100 mA (maximum)
  • Receiving Current: 50 mA (maximum)

Detailed Pin Configuration

The MCP25020-I/P has a total of 8 pins, which are as follows:

  1. VDD - Power supply voltage input
  2. VSS - Ground reference
  3. TXD - Transmit data output
  4. RXD - Receive data input
  5. CS - Chip select input
  6. SCK - Serial clock input
  7. SI - Serial data input
  8. SO - Serial data output

Functional Features

  • High-speed CAN transceiver
  • Supports both 5V and 3.3V supply voltages
  • Integrated protection against electromagnetic interference (EMI)
  • Built-in electrostatic discharge (ESD) protection
  • Three-byte transmit and receive buffers for efficient data transfer
  • Low standby current for power-saving operation

Advantages and Disadvantages

Advantages

  • High-speed communication capability
  • Wide operating voltage range
  • Robust protection against EMI and ESD
  • Compact DIP package for easy integration
  • Efficient data transfer with buffer support

Disadvantages

  • Limited buffer size may restrict the amount of data that can be transmitted/received at once
  • Requires additional external components for complete system implementation

Working Principles

The MCP25020-I/P operates based on the principles of the Controller Area Network (CAN) protocol. It facilitates communication between different nodes within an automotive system by transmitting and receiving data packets over a shared bus. The IC incorporates various features to ensure reliable and efficient data transfer, including EMI and ESD protection.

Detailed Application Field Plans

The MCP25020-I/P is widely used in automotive applications, including but not limited to:

  1. Vehicle diagnostics and monitoring systems
  2. Engine control units (ECUs)
  3. Body control modules
  4. Transmission control units
  5. Infotainment systems
  6. Advanced driver-assistance systems (ADAS)

Detailed and Complete Alternative Models

Some alternative models to the MCP25020-I/P include:

  1. MCP2561 - High-speed CAN transceiver with improved noise immunity
  2. SN65HVD230 - CAN transceiver with low-power standby mode
  3. TJA1050 - Standalone CAN transceiver with integrated bus protection

These alternative models offer similar functionality and can be considered as substitutes depending on specific application requirements.

Word count: 550 words

技術ソリューションにおける MCP25020-I/P の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum clock frequency of MCP25020-I/P?
    - The maximum clock frequency of MCP25020-I/P is 1 MHz.

  2. Can MCP25020-I/P be used in automotive applications?
    - Yes, MCP25020-I/P is suitable for automotive applications as it is designed to operate in harsh environments.

  3. What is the operating voltage range of MCP25020-I/P?
    - The operating voltage range of MCP25020-I/P is 2.7V to 5.5V.

  4. Does MCP25020-I/P support SPI communication?
    - Yes, MCP25020-I/P supports Serial Peripheral Interface (SPI) communication.

  5. Is MCP25020-I/P compatible with CAN bus systems?
    - Yes, MCP25020-I/P is designed to interface with CAN bus systems.

  6. What is the typical standby current consumption of MCP25020-I/P?
    - The typical standby current consumption of MCP25020-I/P is 5 µA.

  7. Can multiple MCP25020-I/P devices be connected on the same bus?
    - Yes, multiple MCP25020-I/P devices can be connected on the same bus using their unique addresses.

  8. Does MCP25020-I/P have built-in ESD protection?
    - Yes, MCP25020-I/P features built-in Electrostatic Discharge (ESD) protection.

  9. What is the temperature range for MCP25020-I/P operation?
    - MCP25020-I/P is designed to operate within a temperature range of -40°C to 125°C.

  10. Is there a development kit available for MCP25020-I/P?
    - Yes, Microchip offers a development kit for MCP25020-I/P to facilitate its integration into technical solutions.