AT17N256-10PC

Product Overview

Category

AT17N256-10PC belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

• Non-volatile: The stored data remains intact even when power is removed.
• High capacity: The AT17N256-10PC has a storage capacity of 256 kilobits.
• Fast access time: It offers quick read and write operations.
• Low power consumption: The device operates efficiently, consuming minimal power.
• Durable: The memory cells have a high endurance, ensuring long-term reliability.

Package

The AT17N256-10PC is available in a standard plastic package, which provides protection and facilitates easy integration into electronic circuits.

Essence

The essence of this product lies in its ability to reliably store and retrieve digital information, making it an essential component in various electronic systems.

Packaging/Quantity

The AT17N256-10PC is typically packaged in reels or tubes, with each package containing a specific quantity of devices. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

• Storage Capacity: 256 kilobits
• Operating Voltage: 2.7V - 3.6V
• Access Time: 70 nanoseconds
• Operating Temperature Range: -40°C to +85°C
• Interface: Parallel
• Package Type: PDIP (Plastic Dual In-line Package)

Detailed Pin Configuration

The AT17N256-10PC has a total of 28 pins, which are assigned specific functions as follows:

1. A0 - Address Input
2. A1 - Address Input
3. A2 - Address Input
4. A3 - Address Input
5. A4 - Address Input
6. A5 - Address Input
7. A6 - Address Input
8. A7 - Address Input
9. A8 - Address Input
10. A9 - Address Input
11. A10 - Address Input
12. A11 - Address Input
13. A12 - Address Input
14. A13 - Address Input
15. A14 - Address Input
16. /CE - Chip Enable Input
17. /OE - Output Enable Input
18. /WE - Write Enable Input
19. I/O0 - Data Input/Output
20. I/O1 - Data Input/Output
21. I/O2 - Data Input/Output
22. I/O3 - Data Input/Output
23. Vcc - Power Supply
24. GND - Ground
25. NC - No Connection
26. NC - No Connection
27. NC - No Connection
28. NC - No Connection

Functional Features

• Random Access: The AT17N256-10PC allows for random access to any memory location, enabling efficient data retrieval.
• High-Speed Operation: With a fast access time of 70 nanoseconds, this device ensures quick read and write operations.
• Low Power Consumption: The low power requirements make it suitable for battery-powered devices.
• Reliable Data Retention: The non-volatile nature of the memory cells ensures that stored data remains intact even during power loss or system shutdown.

Advantages and Disadvantages

Advantages

• Non-volatile storage ensures data integrity.
• High capacity allows for storing a significant amount of information.
• Fast access time enables quick data retrieval.
• Low power consumption prolongs battery life.
• Durable and reliable operation.

Disadvantages

• Limited storage capacity compared to other memory technologies.
• Parallel interface may require additional circuitry for interfacing with modern systems.
• Relatively higher cost compared to some alternative memory solutions.

Working Principles

The AT17N256-10PC utilizes a combination of electronic circuits and non-volatile memory cells to store and retrieve digital information. The memory cells consist of floating-gate transistors that can be electrically programmed and erased. When data is written, charges are trapped in the floating gate, altering the transistor's behavior and storing the desired information. During read operations, the stored charges are sensed, allowing the retrieval of the stored data.

Detailed Application Field Plans

The AT17N256-10PC finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Industrial automation - Automotive electronics - Medical devices

In embedded systems, it can be used for firmware storage, configuration data, or parameter storage. In consumer electronics, it may find use in set-top boxes, gaming consoles, or audio/video equipment. Industrial automation systems can utilize it for storing program code or sensor calibration data. Automotive electronics may employ it for storing vehicle-specific settings or firmware updates. Medical devices can benefit from its non-volatile storage capabilities for patient data or device