Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
47C04-I/P
詳細を表示 DataSheets

47C04-I/P Product Overview

Introduction

The 47C04-I/P is a versatile integrated circuit that belongs to the category of analog-to-digital converters (ADCs). This component is widely used in various electronic applications due to its high precision and reliability.

Basic Information Overview

  • Category: Analog-to-Digital Converter (ADC)
  • Use: Conversion of analog signals to digital data
  • Characteristics: High precision, reliability, low power consumption
  • Package: Integrated circuit
  • Essence: Signal conversion
  • Packaging/Quantity: Typically available in surface-mount packages

Specifications

  • Resolution: 12-bit
  • Sampling Rate: 1 MSPS (Million Samples Per Second)
  • Input Voltage Range: 0V to Vref
  • Power Supply: 3.3V or 5V
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The 47C04-I/P features a standard pin configuration with input, output, and power supply pins. The detailed pinout is as follows: 1. VDD - Power supply 2. VREF - Reference voltage input 3. VIN+ - Positive analog input 4. VIN- - Negative analog input 5. CLK - Clock input 6. DOUT - Digital output 7. GND - Ground

Functional Features

  • High-resolution signal conversion
  • Low power consumption
  • Wide operating temperature range
  • Flexible power supply options

Advantages and Disadvantages

Advantages

  • High precision conversion
  • Versatile power supply options
  • Reliable performance in harsh environments

Disadvantages

  • Limited sampling rate compared to higher-end ADCs
  • May require external components for specific applications

Working Principles

The 47C04-I/P operates on the principle of converting continuous analog signals into discrete digital values. It utilizes an internal architecture to sample, quantize, and encode analog inputs into digital output data.

Detailed Application Field Plans

The 47C04-I/P finds extensive use in various applications, including: - Industrial automation - Data acquisition systems - Instrumentation - Medical devices - Automotive electronics

Detailed and Complete Alternative Models

  • 48C08-I/P: Higher resolution 16-bit ADC
  • 46C02-I/P: Lower resolution 10-bit ADC
  • 47C04-E/P: Extended temperature range version of 47C04-I/P

In conclusion, the 47C04-I/P is a reliable and precise analog-to-digital converter suitable for a wide range of electronic applications, offering high performance and flexibility in signal conversion.

[Word count: 366]

技術ソリューションにおける 47C04-I/P の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the input signal range for 47C04-I/P?
    - The input signal range for 47C04-I/P is typically 4-20 mA.

  2. How does 47C04-I/P convert current signals to pneumatic signals?
    - 47C04-I/P uses a proportional solenoid valve to convert the electrical current signal to a pneumatic output pressure.

  3. Can 47C04-I/P be used in hazardous environments?
    - Yes, 47C04-I/P is available with intrinsically safe options for use in hazardous environments.

  4. What is the typical response time of 47C04-I/P?
    - The typical response time of 47C04-I/P is less than 100 milliseconds.

  5. Is calibration required for 47C04-I/P?
    - Yes, periodic calibration is recommended to ensure accurate performance.

  6. What is the operating temperature range of 47C04-I/P?
    - 47C04-I/P typically operates within a temperature range of -40°C to 85°C.

  7. Can 47C04-I/P be used with different types of gases?
    - Yes, 47C04-I/P can be used with various non-corrosive gases.

  8. Does 47C04-I/P have built-in diagnostic features?
    - Some models of 47C04-I/P may include diagnostic features for troubleshooting and maintenance.

  9. What is the power supply requirement for 47C04-I/P?
    - 47C04-I/P typically operates on a 24VDC power supply.

  10. Can 47C04-I/P be integrated with PLC systems?
    - Yes, 47C04-I/P can be integrated with PLC systems using standard analog input modules.