画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
24LC256T-E/SN

24LC256T-E/SN

Product Overview

Category

The 24LC256T-E/SN belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is used for non-volatile data storage in various electronic devices, such as microcontrollers, sensors, and communication modules.

Characteristics

  • Non-volatile memory
  • I2C interface
  • Low power consumption
  • Small form factor
  • Wide operating voltage range

Package

The 24LC256T-E/SN is available in a small outline package (SN) with a specified quantity per reel.

Specifications

  • Memory Size: 256 Kbits
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 24LC256T-E/SN has eight pins, including power supply, ground, and I2C communication pins. A detailed pinout diagram can be found in the product datasheet.

Functional Features

  • Byte and Page Write Modes
  • Sequential Read Operation
  • Write Protect Feature
  • Software Write Protection
  • Self-timed Write Cycle

Advantages

  • Low power consumption
  • High reliability and endurance
  • Small form factor
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to some flash memory alternatives

Working Principles

The 24LC256T-E/SN operates by using an I2C interface to communicate with the host microcontroller or system. It stores data in a non-volatile manner, allowing for long-term retention of information even when power is removed.

Detailed Application Field Plans

The 24LC256T-E/SN is commonly used in applications such as: - Sensor data logging - Configuration storage in embedded systems - Firmware storage in microcontroller-based devices - Parameter storage in communication modules

Detailed and Complete Alternative Models

Some alternative models to the 24LC256T-E/SN include: - AT24C256C - CAT24C256 - M24M02

In conclusion, the 24LC256T-E/SN is a versatile EEPROM chip suitable for various electronic applications, offering non-volatile data storage, low power consumption, and reliable performance.

Word Count: 322

技術ソリューションにおける 24LC256T-E/SN の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What is the maximum clock frequency for 24LC256T-E/SN?
    Answer: The maximum clock frequency for 24LC256T-E/SN is 400 kHz.

  2. Question: What is the operating voltage range for 24LC256T-E/SN?
    Answer: The operating voltage range for 24LC256T-E/SN is 1.7V to 5.5V.

  3. Question: Can 24LC256T-E/SN be used in automotive applications?
    Answer: Yes, 24LC256T-E/SN is AEC-Q100 qualified and suitable for automotive applications.

  4. Question: What is the typical write cycle time for 24LC256T-E/SN?
    Answer: The typical write cycle time for 24LC256T-E/SN is 5 ms.

  5. Question: Does 24LC256T-E/SN support sequential reads?
    Answer: Yes, 24LC256T-E/SN supports sequential reads for efficient data retrieval.

  6. Question: What is the maximum ambient temperature for 24LC256T-E/SN?
    Answer: The maximum ambient temperature for 24LC256T-E/SN is 125°C.

  7. Question: Can 24LC256T-E/SN be used in industrial control systems?
    Answer: Yes, 24LC256T-E/SN is suitable for use in industrial control systems.

  8. Question: What is the page size of 24LC256T-E/SN?
    Answer: The page size of 24LC256T-E/SN is 64 bytes.

  9. Question: Is 24LC256T-E/SN compatible with I2C communication protocol?
    Answer: Yes, 24LC256T-E/SN is compatible with the I2C communication protocol.

  10. Question: Can 24LC256T-E/SN operate in a low-power mode?
    Answer: Yes, 24LC256T-E/SN can operate in a low-power standby mode to conserve energy.