Micro Commercial Co
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
5KP100A-TP
詳細を表示 DataSheets

5KP100A-TP Product Overview

Introduction

The 5KP100A-TP belongs to the category of transient voltage suppressor diodes. This product is widely used for surge protection in various electronic circuits and systems. Below is a comprehensive overview of the 5KP100A-TP, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Surge protection in electronic circuits and systems
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: DO-201AD (DO-27)
  • Essence: Protecting sensitive electronic components from voltage transients
  • Packaging/Quantity: Available in reels or bulk packaging, quantity varies based on supplier

Specifications

  • Peak Pulse Power: 5000W
  • Breakdown Voltage: 100V
  • Operating Temperature Range: -55°C to +175°C
  • Polarity: Unidirectional
  • Mounting Type: Through Hole
  • Lead-Free Status: Lead-free

Detailed Pin Configuration

The 5KP100A-TP has a standard DO-201AD package with two leads. The anode lead is typically longer than the cathode lead, allowing for easy identification and installation.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient overvoltage to protect downstream components.
  • Fast Response Time: Rapid reaction to voltage spikes ensures minimal impact on the protected circuitry.
  • High Surge Capability: Capable of handling large surge currents without degradation.

Advantages and Disadvantages

Advantages

  • High surge capability
  • Low clamping voltage
  • Fast response time
  • Reliable surge protection

Disadvantages

  • Unidirectional protection only
  • Requires proper installation for effective protection

Working Principles

When a transient voltage spike occurs, the 5KP100A-TP diode conducts and clamps the voltage to a safe level, diverting the excess energy away from the sensitive components. This action protects the downstream circuitry from damage due to voltage transients.

Detailed Application Field Plans

The 5KP100A-TP is commonly used in the following applications: - Power supplies - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • 5KP110A-TP: Higher breakdown voltage variant
  • 5KP90A-TP: Lower breakdown voltage variant
  • 5KP100CA-TP: Bidirectional variant for symmetrical protection

In conclusion, the 5KP100A-TP transient voltage suppressor diode offers reliable surge protection with high surge capability, low clamping voltage, and fast response time. Its unidirectional nature and specific breakdown voltage make it suitable for a wide range of applications, from power supplies to consumer electronics.

Word count: 411

技術ソリューションにおける 5KP100A-TP の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of 5KP100A-TP in technical solutions:

  1. What is the maximum peak pulse power of 5KP100A-TP?

    • The maximum peak pulse power of 5KP100A-TP is 5000 watts.

  2. What is the breakdown voltage of 5KP100A-TP?

    • The breakdown voltage of 5KP100A-TP is 100 volts.

  3. What type of diode is 5KP100A-TP?

    • 5KP100A-TP is a transient voltage suppressor (TVS) diode.

  4. What are the typical applications of 5KP100A-TP?

    • Typical applications of 5KP100A-TP include surge protection in electronic equipment, power supplies, and communication systems.

  5. What is the response time of 5KP100A-TP?

    • The response time of 5KP100A-TP is very fast, typically in picoseconds.

  6. Is 5KP100A-TP suitable for high-speed data lines?

    • Yes, 5KP100A-TP is suitable for protecting high-speed data lines from voltage transients.

  7. Can 5KP100A-TP be used in automotive electronics?

    • Yes, 5KP100A-TP can be used in automotive electronics for overvoltage protection.

  8. What is the operating temperature range of 5KP100A-TP?

    • The operating temperature range of 5KP100A-TP is typically -55°C to 175°C.

  9. Does 5KP100A-TP meet any specific industry standards?

    • Yes, 5KP100A-TP may meet industry standards such as AEC-Q101 for automotive applications.

  10. How should 5KP100A-TP be mounted in a circuit?

    • 5KP100A-TP should be mounted close to the protected circuitry and with short leads to minimize inductance.

These questions and answers provide a basic understanding of the application of 5KP100A-TP in technical solutions. If you need more detailed information, feel free to ask!