MAX8765AETI+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High-efficiency, Low-power consumption
• Package: TQFN-28
• Essence: Voltage Regulator
• Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.6V to 3.3V
• Maximum Output Current: 1.5A
• Efficiency: Up to 95%
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX8765AETI+T has a total of 28 pins. The pin configuration is as follows:

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. VOUT: Output Voltage
6. PGND: Power Ground
7. AGND: Analog Ground
8. SS/TR: Soft-Start/Tracking Pin
9. COMP: Compensation Pin
10. BST: Boost Pin
11. LX: Inductor Connection
12. SW: Switching Node
13. VCC: Supply Voltage
14. PG: Power Good Indicator
15. NC: No Connect
16. NC: No Connect
17. NC: No Connect
18. NC: No Connect
19. NC: No Connect
20. NC: No Connect
21. NC: No Connect
22. NC: No Connect
23. NC: No Connect
24. NC: No Connect
25. NC: No Connect
26. NC: No Connect
27. NC: No Connect
28. NC: No Connect

Functional Features

• High-efficiency voltage regulation
• Low-power consumption
• Overcurrent protection
• Thermal shutdown protection
• Soft-start and tracking capability
• Power good indicator

Advantages and Disadvantages

Advantages

• High efficiency results in reduced power loss
• Wide input voltage range allows for versatile applications
• Compact package size saves board space
• Power good indicator provides system status information

Disadvantages

• Limited maximum output current of 1.5A
• Operating temperature range may not be suitable for extreme environments

Working Principles

The MAX8765AETI+T is a voltage regulator IC that takes an input voltage within the range of 2.7V to 5.5V and converts it into a regulated output voltage between 0.6V and 3.3V. It achieves high efficiency by utilizing a switching regulator topology. The IC incorporates various protection features such as overcurrent protection and thermal shutdown to ensure safe operation. The soft-start and tracking capability allow for controlled startup and synchronization with other power management components.

Detailed Application Field Plans

The MAX8765AETI+T is commonly used in various applications, including:

1. Portable electronic devices
2. Battery-powered systems
3. IoT devices
4. Wearable devices
5. Industrial equipment
6. Automotive electronics

Detailed and Complete Alternative Models

Here are some alternative models that can be considered as alternatives to the MAX8765AETI+T:

1. MAX1765EUK+: Similar specifications, SOT23-5 package
2. LT1765ES8-3.3: Similar specifications, SOIC-8 package
3. TPS79633DCQR: Similar specifications, VSSOP-8 package
4. ADP3339AKCZ-3.3-R7: Similar specifications, SOT223-3 package
5. MIC5205-3.3YM5-TR: Similar specifications, SOT23-5 package

These alternative models provide similar functionality and can be used as replacements based on specific requirements.

Note: The content provided above is a sample structure for an encyclopedia entry and may not reflect the actual specifications or details of the MAX8765AETI+T. Please refer to the official datasheet or manufacturer's documentation for accurate information.