画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX6902ETA+T

MAX6902ETA+T

Product Overview

Category

The MAX6902ETA+T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for timing and power management applications.

Characteristics

  • Integrated circuit with timing and power management functions
  • Small form factor
  • Low power consumption
  • High accuracy
  • Wide operating voltage range

Package

The MAX6902ETA+T is available in a small 8-pin TDFN package.

Essence

The essence of the MAX6902ETA+T lies in its ability to provide accurate timing and power management capabilities in a compact package.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage Range: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Timing Accuracy: ±2%
  • Power Consumption: 10µA (typical)
  • Output Frequency Range: 32.768kHz to 8MHz

Detailed Pin Configuration

The MAX6902ETA+T has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. CE: Chip enable input
  4. OUT: Output signal
  5. RST: Reset input
  6. CLK: Clock input
  7. NC: No connection
  8. BAT: Backup battery input

Functional Features

  • Real-time clock (RTC) functionality
  • Programmable alarm and timer functions
  • Power-fail detection and switchover to backup battery
  • Watchdog timer for system reset
  • Oscillator with selectable frequency options
  • I2C interface for communication with microcontrollers

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices
  • Wide operating voltage range enables compatibility with different power sources
  • High accuracy ensures precise timing and power management
  • Versatile functionality with programmable features

Disadvantages

  • Limited output frequency range may not meet the requirements of certain applications
  • Lack of built-in non-volatile memory for data storage

Working Principles

The MAX6902ETA+T operates based on an internal oscillator that generates clock signals. It utilizes a combination of digital logic and analog circuitry to provide accurate timing and power management functions. The device can be programmed through the I2C interface, allowing customization of alarm settings, timers, and other features.

Detailed Application Field Plans

The MAX6902ETA+T finds applications in various fields, including:

  1. Consumer electronics: Used in digital cameras, portable media players, and smartwatches for timekeeping and power management.
  2. Industrial automation: Integrated into control systems and sensors to synchronize operations and manage power supply.
  3. Automotive: Employed in vehicle dashboard displays, infotainment systems, and engine control units for accurate timing and power management.
  4. Medical devices: Utilized in medical equipment such as patient monitors and infusion pumps to ensure precise timing and power backup during critical operations.

Detailed and Complete Alternative Models

  1. DS1307 - Real-time clock IC with I2C interface
  2. MCP7940N - Low-power real-time clock/calendar IC with battery backup
  3. PCF8563 - CMOS real-time clock/calendar IC with alarm and timer functions
  4. DS3231 - Highly accurate real-time clock module with temperature compensation

These alternative models offer similar functionality to the MAX6902ETA+T and can be considered as alternatives depending on specific application requirements.

Word count: 527 words

技術ソリューションにおける MAX6902ETA+T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX6902ETA+T in technical solutions:

  1. Q: What is the MAX6902ETA+T? A: The MAX6902ETA+T is a microprocessor supervisory circuit that monitors the power supply voltage of a system and resets the microprocessor when necessary.

  2. Q: How does the MAX6902ETA+T work? A: The MAX6902ETA+T continuously monitors the power supply voltage and asserts a reset signal to the microprocessor if the voltage falls below a specified threshold.

  3. Q: What is the operating voltage range of the MAX6902ETA+T? A: The MAX6902ETA+T operates with a supply voltage range of 1.6V to 5.5V.

  4. Q: Can the MAX6902ETA+T be used with different microprocessors? A: Yes, the MAX6902ETA+T can be used with a wide range of microprocessors as long as the voltage levels are compatible.

  5. Q: Does the MAX6902ETA+T have any adjustable parameters? A: Yes, the MAX6902ETA+T has an adjustable reset threshold voltage that can be set using external resistors.

  6. Q: Can the MAX6902ETA+T generate a manual reset signal? A: Yes, the MAX6902ETA+T has a manual reset input pin that allows for generating a reset signal externally.

  7. Q: Is the MAX6902ETA+T suitable for battery-powered applications? A: Yes, the MAX6902ETA+T is designed to operate in low-power applications and has a low quiescent current consumption.

  8. Q: Does the MAX6902ETA+T have any built-in protection features? A: Yes, the MAX6902ETA+T includes a watchdog timer and a power-fail comparator for enhanced system reliability.

  9. Q: Can the MAX6902ETA+T be used in automotive applications? A: Yes, the MAX6902ETA+T is qualified for automotive applications and can withstand harsh operating conditions.

  10. Q: What package does the MAX6902ETA+T come in? A: The MAX6902ETA+T is available in a small 8-pin TDFN package, which is suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific requirements of your technical solution.