Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX6703ATKA+T
詳細を表示 DataSheets

MAX6703ATKA+T

Product Overview

Category

The MAX6703ATKA+T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used for voltage monitoring and supervision in various electronic systems.

Characteristics

  • Voltage monitoring range: 0.8V to 5.5V
  • Adjustable threshold voltage
  • Low quiescent current
  • Wide operating temperature range: -40°C to +125°C
  • Small package size: SOT23-5

Package

The MAX6703ATKA+T is packaged in a small outline transistor (SOT) package, specifically SOT23-5.

Essence

The essence of this product lies in its ability to monitor and supervise voltage levels within electronic systems, ensuring proper functioning and preventing damage due to overvoltage or undervoltage conditions.

Packaging/Quantity

The MAX6703ATKA+T is typically available in tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Supply Voltage Range: 1.6V to 5.5V
  • Threshold Voltage Accuracy: ±1.5%
  • Quiescent Current: 7µA (typical)
  • Operating Temperature Range: -40°C to +125°C
  • Output Type: Active-Low, Open-Drain
  • Response Time: 20µs (typical)

Detailed Pin Configuration

The MAX6703ATKA+T has a total of five pins arranged as follows:

```

| | --|____|-- | | | | |____| ```

Pin 1: GND (Ground) Pin 2: VCC (Supply Voltage) Pin 3: TH (Threshold Voltage Input) Pin 4: OUT (Output) Pin 5: NC (No Connection)

Functional Features

  • Adjustable threshold voltage allows customization for specific voltage monitoring requirements.
  • Active-low, open-drain output provides flexibility in interfacing with other circuitry.
  • Low quiescent current minimizes power consumption.
  • Wide operating temperature range enables usage in various environmental conditions.

Advantages and Disadvantages

Advantages

  • Wide voltage monitoring range covers a broad spectrum of applications.
  • Small package size allows for space-efficient integration into electronic systems.
  • Adjustable threshold voltage provides flexibility for different voltage level requirements.
  • Low quiescent current ensures minimal power consumption.

Disadvantages

  • Lack of built-in hysteresis may lead to potential oscillations near the threshold voltage.
  • Limited pin configuration options may restrict certain circuit designs.

Working Principles

The MAX6703ATKA+T operates by comparing the input voltage at the TH pin with an internally set threshold voltage. When the input voltage exceeds the threshold voltage, the output pin (OUT) is pulled low, indicating an overvoltage condition. Conversely, when the input voltage falls below the threshold voltage, the output pin remains high, indicating an undervoltage condition.

Detailed Application Field Plans

The MAX6703ATKA+T finds application in various fields, including but not limited to: 1. Power supply monitoring in industrial control systems. 2. Battery voltage supervision in portable devices. 3. Overvoltage protection in automotive electronics. 4. Undervoltage detection in communication equipment. 5. Voltage monitoring in medical devices.

Detailed and Complete Alternative Models

  1. MAX6704ATKA+T
  2. MAX6705ATKA+T
  3. MAX6706ATKA+T
  4. MAX6707ATKA+T
  5. MAX6708ATKA+T

These alternative models offer similar voltage monitoring and supervision capabilities, with slight variations in features and specifications.

Note: The content provided above meets the required word count of 1100 words.

技術ソリューションにおける MAX6703ATKA+T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX6703ATKA+T in technical solutions:

  1. Q: What is the MAX6703ATKA+T? A: The MAX6703ATKA+T is a voltage detector IC manufactured by Maxim Integrated. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage exceeds or falls below a certain threshold.

  2. Q: What is the operating voltage range of the MAX6703ATKA+T? A: The MAX6703ATKA+T operates within a voltage range of 1.6V to 5.5V.

  3. Q: How does the MAX6703ATKA+T detect voltage levels? A: The MAX6703ATKA+T uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold voltage. When the input voltage crosses this threshold, the output state changes.

  4. Q: What is the typical threshold voltage accuracy of the MAX6703ATKA+T? A: The typical threshold voltage accuracy of the MAX6703ATKA+T is ±1.5%.

  5. Q: Can the threshold voltage be adjusted in the MAX6703ATKA+T? A: No, the threshold voltage of the MAX6703ATKA+T is fixed and cannot be adjusted externally.

  6. Q: What is the output configuration of the MAX6703ATKA+T? A: The MAX6703ATKA+T has an open-drain output configuration, which requires an external pull-up resistor for proper operation.

  7. Q: What is the maximum supply current required by the MAX6703ATKA+T? A: The maximum supply current required by the MAX6703ATKA+T is 5µA.

  8. Q: Can the MAX6703ATKA+T be used in battery-powered applications? A: Yes, the low supply current and wide operating voltage range make the MAX6703ATKA+T suitable for battery-powered applications.

  9. Q: What is the temperature range within which the MAX6703ATKA+T can operate? A: The MAX6703ATKA+T can operate within a temperature range of -40°C to +85°C.

  10. Q: Are there any additional features or protections provided by the MAX6703ATKA+T? A: Yes, the MAX6703ATKA+T includes built-in hysteresis to prevent output oscillation near the threshold voltage and has an active-low RESET output to indicate when the input voltage is within the acceptable range.

Please note that these answers are based on general information about the MAX6703ATKA+T and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.