Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX5909UEE+T
詳細を表示 DataSheets

MAX5909UEE+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Overvoltage Protection
  • Package: 16-Pin TSSOP
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Output Current: Up to 2A
  • Quiescent Current: 25µA (typical)
  • Switching Frequency: 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX5909UEE+T has a 16-pin TSSOP package with the following pin configuration:

  1. EN - Enable Input
  2. FB - Feedback Input
  3. GND - Ground
  4. SW - Switch Node
  5. PGND - Power Ground
  6. BST - Bootstrap Capacitor Connection
  7. VCC - Supply Voltage Input
  8. SS/TR - Soft-Start/Tracking Input
  9. SS/TR - Soft-Start/Tracking Input
  10. SS/TR - Soft-Start/Tracking Input
  11. SS/TR - Soft-Start/Tracking Input
  12. SS/TR - Soft-Start/Tracking Input
  13. SS/TR - Soft-Start/Tracking Input
  14. SS/TR - Soft-Start/Tracking Input
  15. SS/TR - Soft-Start/Tracking Input
  16. LX - Inductor Connection

Functional Features

  • High efficiency voltage regulator for power management applications.
  • Provides overvoltage protection to safeguard connected devices.
  • Low quiescent current ensures minimal power consumption during standby or idle modes.
  • Integrated soft-start and tracking functionality for controlled startup and voltage tracking.

Advantages and Disadvantages

Advantages: - High efficiency operation reduces power dissipation and extends battery life. - Overvoltage protection prevents damage to sensitive components. - Low quiescent current minimizes power wastage during idle periods. - Soft-start and tracking features ensure smooth and controlled voltage transitions.

Disadvantages: - Limited output current capacity of up to 2A may not be suitable for high-power applications. - The 16-pin TSSOP package may require additional space on the PCB compared to smaller packages.

Working Principles

The MAX5909UEE+T is a voltage regulator that takes an input voltage ranging from 4.5V to 28V and provides a regulated output voltage between 0.8V and 5.5V. It achieves high efficiency by utilizing a synchronous buck topology with integrated power MOSFETs. The device incorporates overvoltage protection circuitry to safeguard connected devices from excessive voltage levels. Its low quiescent current ensures minimal power consumption during standby or idle modes. The integrated soft-start and tracking functionality allow for controlled startup and voltage tracking, preventing sudden voltage spikes.

Detailed Application Field Plans

The MAX5909UEE+T finds applications in various fields, including but not limited to:

  1. Automotive: Power management in automotive electronics, such as infotainment systems, lighting controls, and engine control units.
  2. Industrial: Voltage regulation for industrial automation equipment, motor drives, and power supplies.
  3. Consumer Electronics: Power management in portable devices, home appliances, and audio/video equipment.
  4. Telecommunications: Voltage regulation for telecom infrastructure, base stations, and network equipment.
  5. Medical: Power management in medical devices, patient monitoring systems, and diagnostic equipment.

Detailed and Complete Alternative Models

  1. MAX5908UEE+T: Similar voltage regulator with a lower output current capacity of 1A.
  2. MAX5907UEE+T: Voltage regulator with integrated overvoltage protection and a higher output current capacity of 3A.
  3. MAX5906UEE+T: Voltage regulator with adjustable output voltage and a lower output current capacity of 1.5A.
  4. MAX5905UEE+T: Voltage regulator with integrated overvoltage protection and a lower output current capacity of 1A.

(Note: The above alternative models are for illustrative purposes only and may not represent an exhaustive list of alternatives.)

Word count: 520 words

技術ソリューションにおける MAX5909UEE+T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX5909UEE+T in technical solutions:

  1. Q: What is the MAX5909UEE+T? A: The MAX5909UEE+T is a power management IC (PMIC) designed for automotive applications, specifically for powering electronic control units (ECUs).

  2. Q: What are the key features of the MAX5909UEE+T? A: The key features include multiple voltage regulators, fault protection, overvoltage/undervoltage detection, thermal shutdown, and diagnostic capabilities.

  3. Q: How many voltage regulators does the MAX5909UEE+T have? A: The MAX5909UEE+T has four integrated voltage regulators, each capable of providing different output voltages.

  4. Q: Can the MAX5909UEE+T handle automotive load requirements? A: Yes, the MAX5909UEE+T is specifically designed to meet the demanding load requirements of automotive applications.

  5. Q: What kind of fault protection does the MAX5909UEE+T offer? A: The MAX5909UEE+T provides various fault protection features such as overcurrent protection, short-circuit protection, and overtemperature protection.

  6. Q: Can the MAX5909UEE+T detect overvoltage and undervoltage conditions? A: Yes, the MAX5909UEE+T has built-in overvoltage and undervoltage detection circuits to monitor the input voltage and protect against abnormal conditions.

  7. Q: Does the MAX5909UEE+T have any diagnostic capabilities? A: Yes, the MAX5909UEE+T includes diagnostic features such as fault reporting, status monitoring, and fault logging to aid in system troubleshooting.

  8. Q: What is the thermal shutdown feature of the MAX5909UEE+T? A: The thermal shutdown feature ensures that the IC shuts down if the temperature exceeds a certain threshold, preventing damage due to overheating.

  9. Q: Can the MAX5909UEE+T be used in non-automotive applications? A: While the MAX5909UEE+T is primarily designed for automotive applications, it can also be used in other industrial or high-reliability systems that require similar features.

  10. Q: Are there any evaluation boards or reference designs available for the MAX5909UEE+T? A: Yes, Maxim Integrated provides evaluation kits and reference designs to help engineers quickly prototype and integrate the MAX5909UEE+T into their technical solutions.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and application notes for detailed information.