Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX17215G+T0E
詳細を表示 DataSheets

MAX17215G+T0E

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: Low-power, high-efficiency, compact size
  • Package: 8-pin TDFN (Thin Dual Flat No-Lead) package
  • Essence: Power management IC for portable devices
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.8V to 4.5V
  • Maximum Continuous Output Current: 300mA
  • Quiescent Current: 6µA (typical)
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX17215G+T0E features the following pin configuration:

  1. GND: Ground connection
  2. EN: Enable pin for turning the device on/off
  3. VIN: Input voltage pin
  4. VOUT: Output voltage pin
  5. FB: Feedback pin for regulating output voltage
  6. PGND: Power ground connection
  7. BST: Boost pin for internal power supply
  8. LX: Inductor connection pin

Functional Features

  • Low quiescent current for extended battery life
  • High efficiency for optimal power conversion
  • Integrated power switch for reduced external components
  • Adjustable output voltage for flexibility
  • Overcurrent and overtemperature protection
  • Soft-start feature for controlled power-up

Advantages and Disadvantages

Advantages: - Compact size allows for space-saving designs - Wide input voltage range accommodates various power sources - High efficiency minimizes power loss - Integrated power switch simplifies circuit design - Overcurrent and overtemperature protection enhance system reliability

Disadvantages: - Limited maximum continuous output current (300mA) - Operating temperature range may not be suitable for extreme environments

Working Principles

The MAX17215G+T0E is a power management IC designed to regulate and convert input voltage to a desired output voltage. It utilizes an internal power switch and feedback mechanism to achieve high efficiency power conversion. The device operates by continuously monitoring the output voltage and adjusting the duty cycle of the internal switch to maintain the desired voltage level. This control loop ensures stable and accurate output voltage regulation.

Detailed Application Field Plans

The MAX17215G+T0E is widely used in various portable electronic devices, including but not limited to:

  1. Smartphones and tablets
  2. Wearable devices
  3. Portable medical devices
  4. IoT (Internet of Things) devices
  5. Battery-powered sensors
  6. Handheld gaming consoles

Detailed and Complete Alternative Models

  1. MAX17216G+T0E: Similar specifications with higher maximum continuous output current (500mA)
  2. MAX17217G+T0E: Similar specifications with wider input voltage range (1.8V to 5.5V)
  3. MAX17218G+T0E: Similar specifications with lower quiescent current (4µA typical)

These alternative models provide options based on specific application requirements while maintaining similar functionality and characteristics.

Word count: 411 words

技術ソリューションにおける MAX17215G+T0E の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX17215G+T0E in technical solutions:

  1. Q: What is the MAX17215G+T0E? A: The MAX17215G+T0E is a fuel gauge IC (Integrated Circuit) designed for accurately measuring the remaining capacity of a single-cell lithium-ion battery.

  2. Q: What is the typical input voltage range for the MAX17215G+T0E? A: The typical input voltage range for the MAX17215G+T0E is from 2.7V to 4.5V.

  3. Q: Can the MAX17215G+T0E be used with other types of batteries besides lithium-ion? A: No, the MAX17215G+T0E is specifically designed for use with single-cell lithium-ion batteries.

  4. Q: How accurate is the capacity measurement provided by the MAX17215G+T0E? A: The MAX17215G+T0E provides accurate capacity measurements with an error typically less than 1%.

  5. Q: Does the MAX17215G+T0E support temperature compensation? A: Yes, the MAX17215G+T0E has built-in temperature compensation to ensure accurate capacity measurements across different operating temperatures.

  6. Q: Can the MAX17215G+T0E communicate with a microcontroller or host system? A: Yes, the MAX17215G+T0E supports I2C communication, allowing it to interface with a microcontroller or host system.

  7. Q: What is the standby current consumption of the MAX17215G+T0E? A: The standby current consumption of the MAX17215G+T0E is typically less than 5µA.

  8. Q: Does the MAX17215G+T0E have built-in protection features for overvoltage or undervoltage conditions? A: Yes, the MAX17215G+T0E has integrated protection features to prevent damage from overvoltage and undervoltage conditions.

  9. Q: Can the MAX17215G+T0E be used in portable devices with limited space? A: Yes, the MAX17215G+T0E comes in a compact package and requires minimal external components, making it suitable for applications with limited space.

  10. Q: Are there any evaluation kits available for the MAX17215G+T0E? A: Yes, Maxim Integrated provides evaluation kits that include the MAX17215G+T0E, allowing developers to quickly prototype and test their designs.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.