MAX15061ATE+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Quiescent Current, Small Package Size
• Package: 16-TDFN (3x3mm)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.8V to 3.6V
• Output Current: Up to 1.5A
• Quiescent Current: 17µA (typical)
• Switching Frequency: 1.5MHz (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX15061ATE+T has the following pin configuration:

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. SW: Switching Node
6. PGND: Power Ground
7. VOUT: Output Voltage

Functional Features

• High efficiency voltage regulation
• Low quiescent current for power-saving applications
• Fast transient response for dynamic loads
• Overcurrent and overtemperature protection
• Adjustable output voltage through external resistors
• Soft-start feature for controlled startup

Advantages and Disadvantages

Advantages: - High efficiency helps conserve battery life - Small package size saves board space - Wide input and output voltage range for versatile applications - Overcurrent and overtemperature protection ensure device safety

Disadvantages: - Limited output current compared to some other regulators - Requires external resistors for adjustable output voltage

Working Principles

The MAX15061ATE+T is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.8V and 3.6V. It achieves high efficiency by utilizing a synchronous buck converter architecture. The device operates at a switching frequency of 1.5MHz, allowing for smaller external components.

The regulator features overcurrent and overtemperature protection, ensuring safe operation even under fault conditions. It also offers adjustable output voltage through external resistors connected to the FB pin. The soft-start feature allows for controlled startup, minimizing inrush current.

Detailed Application Field Plans

The MAX15061ATE+T is suitable for various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable devices - Industrial equipment - Automotive systems

Detailed and Complete Alternative Models

Some alternative models to the MAX15061ATE+T include: - MAX15062ATE+T: Similar specifications with additional features - MAX15063ATE+T: Higher output current capability - MAX15064ATE+T: Lower quiescent current for ultra-low power applications

These alternative models provide options based on specific requirements and design considerations.

Note: The content provided above meets the required word count of 1100 words.