Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX11901ETP+T
詳細を表示 DataSheets

MAX11901ETP+T

Introduction

The MAX11901ETP+T is a high-performance, 16-bit analog-to-digital converter (ADC) designed for applications requiring high precision and low power consumption. This device belongs to the category of integrated circuits and is commonly used in industrial automation, instrumentation, and data acquisition systems.

Basic Information Overview

  • Category: Integrated Circuits/Analog-to-Digital Converters
  • Use: Industrial automation, instrumentation, data acquisition
  • Characteristics: High precision, low power consumption
  • Package: TQFN-20
  • Essence: High-performance ADC for precision applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Resolution: 16 bits
  • Sampling Rate: Up to 500 kSPS
  • Input Voltage Range: 0V to VREF
  • Power Consumption: 3.5mW at 500 kSPS
  • Operating Temperature Range: -40°C to +125°C
  • Supply Voltage: 2.7V to 3.6V

Detailed Pin Configuration

The MAX11901ETP+T features a 20-pin TQFN package with the following pin configuration: 1. IN+ 2. IN- 3. REF 4. DGND 5. AVDD 6. DVDD 7. SCLK 8. SDI 9. SDO 10. CS 11. DOUT/DRDY 12. PDWN 13. AGND 14. REFOUT 15. VIO 16. VIO 17. VIO 18. VIO 19. VIO 20. VIO

Functional Features

  • High resolution and accuracy
  • Low power consumption
  • Flexible input voltage range
  • Serial interface for easy integration
  • Power-down mode for reduced power consumption in standby

Advantages and Disadvantages

Advantages

  • High precision and resolution
  • Low power consumption
  • Wide operating temperature range
  • Small form factor
  • Easy integration with serial interface

Disadvantages

  • Higher cost compared to lower-resolution ADCs
  • Limited input voltage range compared to some competing models

Working Principles

The MAX11901ETP+T operates by converting analog input signals into digital data with high precision and accuracy. It utilizes a combination of internal circuitry and algorithms to achieve its high-performance characteristics while maintaining low power consumption.

Detailed Application Field Plans

The MAX11901ETP+T is well-suited for a wide range of applications including: - Industrial process control - Precision measurement instruments - Data acquisition systems - Medical equipment - Test and measurement instruments

Detailed and Complete Alternative Models

Some alternative models to the MAX11901ETP+T include: - MAX11900: 16-bit ADC with similar performance characteristics - LTC1867: 16-bit ADC with different input voltage range - ADS1115: 16-bit ADC with I2C interface

In conclusion, the MAX11901ETP+T is a high-performance 16-bit ADC suitable for precision applications in various industries. With its high resolution, low power consumption, and flexible input voltage range, it offers a compelling solution for demanding measurement and control systems.

Word Count: 476

技術ソリューションにおける MAX11901ETP+T の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MAX11901ETP+T?

    • The MAX11901ETP+T is a 16-bit, 1MSPS, low-power SAR ADC (Analog-to-Digital Converter) with an internal reference and temperature sensor.

  2. What are the key features of the MAX11901ETP+T?

    • The key features include 16-bit resolution, 1MSPS sampling rate, low power consumption, internal reference, and built-in temperature sensor.

  3. What are the typical applications for the MAX11901ETP+T?

    • Typical applications include industrial automation, data acquisition systems, medical instrumentation, and portable instrumentation.

  4. What is the supply voltage range for the MAX11901ETP+T?

    • The supply voltage range is from 2.7V to 5.25V.

  5. Does the MAX11901ETP+T support SPI interface?

    • Yes, it supports a high-speed SPI-compatible serial interface.

  6. What is the power consumption of the MAX11901ETP+T?

    • The power consumption is typically 3.5mW at 1MSPS.

  7. Can the MAX11901ETP+T operate in harsh environments?

    • Yes, it is designed to operate in industrial temperature ranges (-40°C to +105°C).

  8. Does the MAX11901ETP+T require external calibration?

    • No, it features an internal self-calibration function.

  9. What is the package type of the MAX11901ETP+T?

    • It comes in a 20-pin TQFN package.

  10. Is there a evaluation kit available for the MAX11901ETP+T?

    • Yes, Maxim Integrated provides an evaluation kit for easy testing and development.