Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
DS2792G+T&R
詳細を表示 DataSheets

DS2792G+T&R

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: Tape and Reel (T&R)
  • Essence: Power management IC for various applications
  • Packaging/Quantity: 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

The DS2792G+T&R has the following pin configuration:

  1. VOUT: Output Voltage
  2. GND: Ground
  3. VIN: Input Voltage
  4. EN: Enable Pin
  5. NC: No Connection

Functional Features

  • High efficiency power conversion
  • Low power consumption in standby mode
  • Overcurrent protection
  • Thermal shutdown protection
  • Under-voltage lockout
  • Soft-start functionality

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Wide input voltage range allows for versatile applications - Compact package size enables space-saving designs - Comprehensive protection features ensure system reliability

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - SOT-23-5 package may require additional thermal considerations for certain use cases

Working Principles

The DS2792G+T&R is a power management IC that regulates the input voltage to a desired output voltage level. It utilizes a switching regulator topology to achieve high efficiency power conversion. The integrated control circuitry ensures stable and accurate output voltage regulation. The device also incorporates various protection features to safeguard against overcurrent, thermal issues, and under-voltage conditions.

Detailed Application Field Plans

The DS2792G+T&R is suitable for a wide range of applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

  1. DS2788G+T&R: Similar power management IC with higher maximum output current (2A)
  2. DS2777G+T&R: Power management IC with integrated fuel gauge functionality
  3. DS2809G+T&R: Power management IC with additional GPIO pins for enhanced system control

These alternative models offer different specifications and features to cater to specific application requirements.

Word count: 250 words

技術ソリューションにおける DS2792G+T&R の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of DS2792G+T&R in technical solutions:

  1. Q: What is DS2792G+T&R? A: DS2792G+T&R is a specific model of a battery fuel gauge IC (Integrated Circuit) manufactured by Maxim Integrated. It is commonly used for monitoring and managing battery levels in various electronic devices.

  2. Q: How does DS2792G+T&R work? A: DS2792G+T&R uses advanced algorithms to accurately measure the battery's voltage, current, temperature, and other parameters. It then calculates the remaining capacity and provides this information to the device's operating system or microcontroller.

  3. Q: What are the key features of DS2792G+T&R? A: Some key features of DS2792G+T&R include accurate capacity measurement, support for multiple battery chemistries, temperature compensation, programmable alarms, and communication interfaces like I2C and SMBus.

  4. Q: In which applications can DS2792G+T&R be used? A: DS2792G+T&R can be used in a wide range of applications such as smartphones, tablets, laptops, portable medical devices, power banks, and other battery-powered devices that require accurate battery monitoring.

  5. Q: Can DS2792G+T&R support different battery chemistries? A: Yes, DS2792G+T&R supports multiple battery chemistries including lithium-ion (Li-ion), lithium polymer (LiPo), nickel-cadmium (NiCd), and nickel-metal hydride (NiMH).

  6. Q: Does DS2792G+T&R provide real-time battery status updates? A: Yes, DS2792G+T&R continuously monitors the battery and provides real-time updates on parameters like voltage, current, temperature, and remaining capacity.

  7. Q: Can DS2792G+T&R be customized for specific applications? A: Yes, DS2792G+T&R offers programmable features and registers that can be configured to meet the requirements of specific applications.

  8. Q: Does DS2792G+T&R support battery protection features? A: Yes, DS2792G+T&R includes built-in protection features such as overvoltage protection, undervoltage protection, and overcurrent protection to safeguard the battery and the device.

  9. Q: What communication interfaces are supported by DS2792G+T&R? A: DS2792G+T&R supports popular communication interfaces like I2C (Inter-Integrated Circuit) and SMBus (System Management Bus) for easy integration with microcontrollers or host systems.

  10. Q: Is DS2792G+T&R a reliable solution for battery monitoring? A: Yes, DS2792G+T&R is known for its high accuracy, reliability, and robustness, making it a trusted choice for battery monitoring in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific implementation and configuration of DS2792G+T&R in different applications.