Littelfuse Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S4008LS2
詳細を表示 DataSheets

S4008LS2 Product Overview

Introduction

The S4008LS2 is a versatile integrated circuit that belongs to the category of voltage regulators. This component is widely used in electronic devices to regulate and stabilize voltage levels, ensuring consistent and reliable performance.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Stabilizing voltage levels in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-220
  • Essence: Ensuring stable power supply for electronic components
  • Packaging/Quantity: Typically supplied in reels or tubes, quantity varies based on supplier

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage: 3.3V
  • Output Current: Up to 1A
  • Dropout Voltage: 0.5V at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The S4008LS2 features a standard TO-220 pin configuration with three pins: 1. Input (Vin): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (Vout): Provides the regulated output voltage

Functional Features

  • High Precision: Provides accurate and stable output voltage
  • Low Dropout Voltage: Minimizes power loss and heat dissipation
  • Thermal Shutdown Protection: Safeguards the device from overheating

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Wide input voltage range
  • Thermal protection for enhanced safety

Disadvantages

  • Limited maximum output current
  • Higher dropout voltage compared to some alternatives

Working Principles

The S4008LS2 operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a constant output voltage despite variations in the input voltage or load conditions. It utilizes a feedback mechanism to achieve precise regulation.

Detailed Application Field Plans

The S4008LS2 finds extensive application in various electronic systems, including: - Power supplies for microcontrollers and digital circuits - Battery-powered devices requiring stable voltage - Automotive electronics for voltage regulation in vehicle systems

Detailed and Complete Alternative Models

  • S4006LS2: Lower output current but similar characteristics
  • S4010LS2: Higher output current with comparable specifications
  • LM317: Widely used adjustable voltage regulator with similar package and pin configuration

In conclusion, the S4008LS2 serves as a dependable voltage regulator with its high precision and thermal protection features, making it suitable for diverse electronic applications.

Word Count: 411

技術ソリューションにおける S4008LS2 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is S4008LS2?

    • S4008LS2 is a high-performance, low-power, quad operational amplifier designed for use in a wide range of applications.

  2. What are the key features of S4008LS2?

    • The key features include low input bias current, low offset voltage, low noise, and wide supply voltage range, making it suitable for precision applications.

  3. What are the typical applications of S4008LS2?

    • Typical applications include active filters, instrumentation amplifiers, precision integrators, and data acquisition systems.

  4. What is the supply voltage range for S4008LS2?

    • The supply voltage range is typically between ±2V to ±18V, making it versatile for various power supply configurations.

  5. What is the input bias current of S4008LS2?

    • The input bias current is typically very low, which is essential for precision applications, and it helps minimize errors in the circuit.

  6. Does S4008LS2 have thermal shutdown protection?

    • Yes, S4008LS2 is equipped with thermal shutdown protection to prevent damage from excessive heat.

  7. What is the recommended operating temperature range for S4008LS2?

    • The recommended operating temperature range is typically between -40°C to 125°C, ensuring reliable performance in various environments.

  8. Is S4008LS2 RoHS compliant?

    • Yes, S4008LS2 is RoHS compliant, meeting environmental standards for lead-free manufacturing.

  9. Can S4008LS2 be used in single-supply applications?

    • Yes, S4008LS2 can be used in single-supply applications, providing flexibility in design and implementation.

  10. What are the package options available for S4008LS2?

    • S4008LS2 is available in various package options, including SOIC, PDIP, and TSSOP, catering to different PCB layout requirements.