Linear Technology/QD Devices
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LTC4313IMS8-1#PBF
詳細を表示 DataSheets

LTC4313IMS8-1#PBF

Product Overview

Category

The LTC4313IMS8-1#PBF belongs to the category of integrated circuits (ICs) used in electronic devices.

Use

This product is primarily used for level shifting and buffering applications in various electronic systems.

Characteristics

  • Level shifting capability
  • Buffering functionality
  • Small form factor
  • Low power consumption

Package

The LTC4313IMS8-1#PBF is packaged in an 8-pin MSOP (Mini Small Outline Package).

Essence

The essence of LTC4313IMS8-1#PBF lies in its ability to facilitate communication between devices operating at different voltage levels.

Packaging/Quantity

The product is typically available in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • I2C Bus Voltage Range: 1.8V to 5.5V
  • Maximum Data Rate: 400kHz
  • Quiescent Current: 0.9µA (typical)

Detailed Pin Configuration

The LTC4313IMS8-1#PBF features the following pin configuration:

  1. SDA - Serial Data Input/Output
  2. SCL - Serial Clock Input
  3. A0 - Address Input Bit 0
  4. GND - Ground
  5. VCC - Power Supply
  6. SDO - Slave Device Output
  7. ADIN - Address Input
  8. ALERT - Interrupt Output

Functional Features

  • Bidirectional level shifting between two I2C buses operating at different voltage levels
  • Automatic bus arbitration and collision detection
  • Glitch filtering on SDA and SCL lines
  • Supports clock stretching and bus busy detection

Advantages and Disadvantages

Advantages

  • Simplifies interfacing between devices with different voltage levels
  • Provides reliable level shifting and buffering capabilities
  • Low power consumption enhances energy efficiency
  • Compact package size allows for space-saving designs

Disadvantages

  • Limited to I2C bus applications
  • May introduce additional latency in communication due to bus arbitration

Working Principles

The LTC4313IMS8-1#PBF acts as a bridge between two I2C buses operating at different voltage levels. It automatically detects and arbitrates bus access, ensuring seamless communication between devices. The device also incorporates glitch filtering and supports clock stretching, enhancing the reliability of data transmission.

Detailed Application Field Plans

The LTC4313IMS8-1#PBF finds applications in various fields, including:

  1. Consumer electronics: Enables communication between devices with different voltage requirements, such as smartphones, tablets, and smart home appliances.
  2. Industrial automation: Facilitates interoperability between sensors, actuators, and control systems operating at different voltage levels.
  3. Automotive electronics: Allows for integration of components with varying voltage levels, enhancing connectivity and functionality in vehicles.
  4. Medical devices: Enables communication between medical sensors, monitors, and control units, ensuring accurate and reliable data exchange.

Detailed and Complete Alternative Models

  1. PCA9306 - Dual bidirectional I2C-bus and SMBus voltage-level translator
  2. TXB0108 - 8-bit bidirectional voltage-level translator with automatic direction sensing
  3. BSS138 - N-channel enhancement mode MOSFET for level shifting applications

These alternative models offer similar level shifting and buffering capabilities, providing flexibility in choosing the most suitable solution for specific applications.

Word count: 520 words

技術ソリューションにおける LTC4313IMS8-1#PBF の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LTC4313IMS8-1#PBF in technical solutions:

Q1: What is LTC4313IMS8-1#PBF? A1: LTC4313IMS8-1#PBF is a specific model number for the LTC4313, which is a hot-swappable I2C bus buffer with built-in capacitive isolation.

Q2: What is the purpose of LTC4313IMS8-1#PBF? A2: The LTC4313IMS8-1#PBF is designed to provide level shifting and buffering capabilities for I2C bus signals, allowing multiple devices to communicate on the same bus without interference.

Q3: How does LTC4313IMS8-1#PBF achieve capacitive isolation? A3: The LTC4313IMS8-1#PBF uses an integrated capacitive isolation technology that allows it to isolate the capacitance of the I2C bus, preventing noise and voltage spikes from affecting the communication between devices.

Q4: Can LTC4313IMS8-1#PBF be used in both 3.3V and 5V systems? A4: Yes, the LTC4313IMS8-1#PBF supports both 3.3V and 5V systems, making it versatile for various applications.

Q5: How many devices can be connected to the LTC4313IMS8-1#PBF? A5: The LTC4313IMS8-1#PBF can support up to 400 devices on the I2C bus.

Q6: Does LTC4313IMS8-1#PBF require external power supply? A6: Yes, the LTC4313IMS8-1#PBF requires an external power supply to operate.

Q7: Can LTC4313IMS8-1#PBF be used for hot-swapping I2C devices? A7: Yes, the LTC4313IMS8-1#PBF is specifically designed for hot-swapping I2C devices, allowing devices to be added or removed from the bus without interrupting communication.

Q8: What is the maximum operating frequency of LTC4313IMS8-1#PBF? A8: The LTC4313IMS8-1#PBF can operate at a maximum frequency of 400kHz.

Q9: Does LTC4313IMS8-1#PBF support clock stretching? A9: Yes, the LTC4313IMS8-1#PBF supports clock stretching, which allows devices on the bus to hold the clock line low to slow down the communication speed.

Q10: Is LTC4313IMS8-1#PBF compatible with other I2C devices? A10: Yes, the LTC4313IMS8-1#PBF is compatible with standard I2C devices and can be used in conjunction with them in various applications.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.