Linear Technology/QD Devices
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LTC4307IMS8#PBF
詳細を表示 DataSheets

LTC4307IMS8#PBF

Product Overview

Category

LTC4307IMS8#PBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a level translator and hot swap controller.

Characteristics

  • Level translation: The LTC4307IMS8#PBF provides bidirectional I2C bus voltage-level shifting between low-voltage and high-voltage systems.
  • Hot swap control: It allows for safe insertion and removal of boards into live backplanes by controlling the inrush current during power-up.

Package

LTC4307IMS8#PBF is available in an 8-pin MSOP package.

Essence

The essence of this product lies in its ability to facilitate communication between devices operating at different voltage levels while ensuring safe hot swapping of boards.

Packaging/Quantity

The LTC4307IMS8#PBF is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Maximum Data Rate: 400kHz
  • Quiescent Current: 1.5mA (typical)

Detailed Pin Configuration

The LTC4307IMS8#PBF has the following pin configuration:

  1. SDA: Serial Data Input/Output
  2. SCL: Serial Clock Input
  3. A1: Address Input 1
  4. A0: Address Input 0
  5. GND: Ground
  6. VCC: Power Supply
  7. SDAOUT: Bidirectional Buffer Output
  8. ALERT: Alert Output

Functional Features

  • Bidirectional voltage-level translation between low-voltage and high-voltage I2C buses.
  • Automatic bus disconnect when the SDA or SCL line is stuck low.
  • Inrush current limiting during hot swapping to prevent damage to the system.
  • Alert output to indicate fault conditions.

Advantages and Disadvantages

Advantages

  • Enables communication between devices with different voltage levels.
  • Protects the system from inrush currents during hot swapping.
  • Provides automatic bus disconnect in case of a stuck line.
  • Compact package size for space-constrained applications.

Disadvantages

  • Limited to I2C bus applications.
  • May not be suitable for systems requiring higher data rates.

Working Principles

The LTC4307IMS8#PBF operates as a bidirectional buffer, translating the voltage levels between two I2C buses. It uses a combination of level shifting and hot swap control circuitry to ensure proper communication and protection during board insertion/removal.

When the SDA or SCL line is stuck low, the LTC4307IMS8#PBF automatically disconnects the bus to prevent bus contention. During hot swapping, it limits the inrush current by controlling the rise time of the output voltage, protecting the system components.

Detailed Application Field Plans

The LTC4307IMS8#PBF finds applications in various fields, including:

  1. Industrial automation: Used for level translation and hot swapping in industrial control systems.
  2. Telecommunications: Facilitates communication between devices operating at different voltage levels in telecom infrastructure.
  3. Automotive electronics: Enables safe board insertion/removal in automotive electronic systems.
  4. Consumer electronics: Used in devices that require I2C communication and hot swap capability.

Detailed and Complete Alternative Models

  1. LTC4311: Similar to LTC4307IMS8#PBF but with an extended temperature range (-40°C to 125°C).
  2. PCA9306: Provides level shifting for I2C and SMBus applications.
  3. TXB0108: Bidirectional voltage-level translator for various communication protocols.

These alternative models offer similar functionality to LTC4307IMS8#PBF and can be considered based on specific application requirements.

Word count: 550 words

技術ソリューションにおける LTC4307IMS8#PBF の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LTC4307IMS8#PBF:

  1. Q: What is LTC4307IMS8#PBF? A: LTC4307IMS8#PBF is a hot-swappable, 2-wire bus buffer that provides bidirectional buffering, voltage translation, and capacitive isolation between two I2C buses.

  2. Q: What is the purpose of LTC4307IMS8#PBF in technical solutions? A: LTC4307IMS8#PBF is used to address bus capacitance and voltage level mismatches in I2C communication systems, allowing multiple devices to communicate effectively.

  3. Q: How does LTC4307IMS8#PBF handle voltage level translation? A: LTC4307IMS8#PBF uses level shifting circuitry to translate logic levels between two different voltage domains, ensuring proper communication between devices with different voltage requirements.

  4. Q: Can LTC4307IMS8#PBF be used for hot-swapping I2C devices? A: Yes, LTC4307IMS8#PBF supports hot-swapping by providing capacitive isolation, preventing bus disruption during device insertion or removal.

  5. Q: What is the maximum operating frequency of LTC4307IMS8#PBF? A: LTC4307IMS8#PBF can operate at frequencies up to 400kHz, making it suitable for most I2C applications.

  6. Q: Does LTC4307IMS8#PBF support multiple devices on the same bus? A: Yes, LTC4307IMS8#PBF allows multiple devices to be connected to the same I2C bus, providing buffering and isolation to ensure reliable communication.

  7. Q: Can LTC4307IMS8#PBF be used in both 3.3V and 5V systems? A: Yes, LTC4307IMS8#PBF is compatible with both 3.3V and 5V systems, making it versatile for various applications.

  8. Q: Does LTC4307IMS8#PBF require external components for operation? A: Yes, LTC4307IMS8#PBF requires external pull-up resistors on the I2C bus lines and decoupling capacitors for proper operation.

  9. Q: Is LTC4307IMS8#PBF suitable for long-distance I2C communication? A: LTC4307IMS8#PBF is primarily designed for short-distance communication within a system. For longer distances, additional measures like I2C extenders or repeaters may be required.

  10. Q: Are there any specific design considerations when using LTC4307IMS8#PBF? A: It is important to consider factors such as bus capacitance, voltage levels, and termination resistors to ensure optimal performance when integrating LTC4307IMS8#PBF into a design.

Please note that these answers are general and may vary depending on the specific requirements and application of LTC4307IMS8#PBF in a technical solution.